similar to: network settings

Hello, everybody! I have two networks (192.168.1.0 and 192.168.2.0) connected across a wireless router with two NICs. I can ping everything allright via ip address, but not by name across subnets. Things on the same subnet ping allright by name. Here are the smb.conf files for my two master browsers: #(192.168.1.249) [global] workgroup = THEBAND netbios name = Yesteryear

Hi all :) I have a masqueraded home lan as well as a friend of mine. I have set up two tinc daemons on both masquerading gateways and I have no trouble connecting (it works pretty smooth) and they show up in the syslog as configured after sending an USR1 / USR2 signal to the daemons. The trouble is the routing / firewalling of the packets. Maybe somebody could give me a hand here? :) The

El 12 de febrero de 2016 16:51:59 CET, Eric Yau <ericyaukhy at hotmail.com> escribi?: >Hi All, > > > >I am trying to setup the site-to-site VPN with TINC for connect my home >network to company network. Here is the IP allocation and configuration >for >your reference. > > > >Home PC (192.168.1.2) ?-----? Home (OPENWRT Router, 192.168.1.1, >10.0.0.1)

Hi, I have a problem with my script. I have a debian with a kernel 2.6.8 patched with patch-2.6.8-ja1.diff of nano.txt site. I have 3 internet connections : - eth1 : - ip : 192.168.8.75 - gw : 192.168.8.73 - eth2 : - ip : 192.168.1.200 - gw : 192.168.1.2 - eth3 : - ip : 192.168.2.200 - gw : 192.168.2.1 and my eth0 for

Hello, We have been using Samba 3.0.7 for almost a month now, and today marks the second time that I see a machine (one out of twelve on our network" that gives this error when I log in: "The system cannot log you on to this domain because the system's computer account in its primary domain is missing or the password on that account is incorrect." Last time this

Hi all, I would like two Samba servers to be able to talk to each other via NetBIOS. The problem is that they are on two different subnets. I have enabled broadcast ping on the routers, and the servers can each ping the other subnet with no trouble. The two relevant IPs are 192.168.1.101 and 192.168.2.3. There is a T1 between two Cisco routers, and IP routing is all set up. Currently

Having a problem with the 3 interface setup. I can get DMZ hosts, and FW to see internet, but anything on LOC interface is unable to get out. My first post to the list didn''t have the information needed, sorry for that, but thank you for pointing me to more resources. I''ve looked at the problem myself some more, but am still stuck. Shorewall Version: 2.2.1 ip addr show 1:

Hello, I have a Debian-Woody-3.0 Router with 3 NIC''s. Kernelversion 2.4.18 +------------+ +-------------+ | | | | |192.168.1.1 | | 192.168.2.1 | | DSL-Router | | ISDN-Router | +------------+ +-------------+ | |

Hi, I have joined a RedHat-7.1 box with Samba 2.2.2 to a NT Domain, and everything works perfect. Except when I look in de log file I see a name query error every 5 minutes , and I don't know how to solve this problem. The PDC-A is de primary domain controller and tux is the linux box with samba. I made u tcpdump on the same moment when I receive the error and it seems that the NT box sends

Hello! I'm trying to make a wireless mesh network with b.a.t.m.a.n. protocol, and I would like to secure the wireless links with tinc. My test network is 2 wireless routers with OpenWRT Kamikaze firmware, and the network topology is the following: |CLIENT|eth0: 192.168.180| <--> |eth0: 192.168.1.1|MESH-NODE|ath0: 192.168.5.54| <~~> |ath0: 192.168.5.51|GW|eth1: 192.168.1.51|

Hello we are a small call center with only 8 lines we use max4 and the 2-2 port gateways from net2phone . There equipment is good but we are getting hit by lower cost competition. We need to be able to compete. We have a couple of providers who are 50% less in some cases even more. So it makes sense that we would like to be able to compete . Since we have spent quite a bit of money on existing

I have been having some problems setting up tinc on 2 masquerading linux slackware boxes. routerA is a NAT router to the internet, for two networks on two interfaces. This are the two networks: eth1 Link encap:Ethernet HWaddr 00:E0:4C:6C:6D:86 inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX

Forgive me if this is a FAQ, but I just can't seem to get it to work... I have an internal network with an NT Server running as a PDC and a WINS Server. I have a Linux box serving as a dial-in ISP provider and firewall to the internet. I have Win-95, Win-98, and Win-NT Workstation users dialing in to the Linux box. We want the remote users to be able to browse the in-house network. The

Hi everyone, just created a Dynamic DNS DHCP server, but my client info-2000256 wont register, or atleast It says registering with dns server but I'm not able to ping it by, info-2000256.domainname.co.yu , my configs are as follows : named.conf // generated by named-bootconf.pl #---------------------------------- # Capriolo #---------------------------------- acl capriolo { 192.168.0.0/24;

Hi All, I'm having a problem with cross subnet browsing and name resolution across an openvpn tunnel. i've found quite a few people who've had the same on mail lists but none of their fixes have worked. The spec of the setups at both ends of the tunnel are as follows: OS - CentOS 5.5 Samba Version 3.5.4 OpenVPN Version 2.0.9-1 Each server is configured in gateway mode with two NICS,

Hello All, I took a break from trying to get Tinc working and have come back to it now with the release of 1.0.11. I have 2 Windows computers connected behind firewalls and everything seems to be correct, except I cannot seem to get any data past the server TAP interface. I can ping the Server TAP interface from the client, but no data will move through the TAP interface to the Internet. I have

Hi to everybody, I write because I have just configure a shorewall to be used as firewall, proxy(with squid) and gateway to 2 internet connections, and it looks to work properly but now I''d like to add a new feature: I would to redirect some specific traffic (emule''s one) only to one of those links. This is my diagram:

Hi all, On my Suse 9.3 prof. server I had two NIC’s: Eth0 IP 192.168.1.1 Eth1 IP 192.168.2.1 Now I added new NIC (eth2) Eth0 IP 192.168.1.1 Eth1 IP 192.168.2.1 Eth2 IP 192.168.1.2 Now I erased eth0 config and turned off this NIC in motherboard bios Eth1 IP 192.168.2.1 Eth2 IP 192.168.1.2 I renamed eth2 to eth0 Eth1 IP 192.168.2.1 Eth0 IP 192.168.1.2 And, finally I

Hi, I think I found a problem in iproute or ubuntu kernel. I think that the "ip route get" returns wrong interface and gateway in an multipath routing environment on Ubuntu 6.06 LTS. I reported it also to launchpad as a bug: https://bugs.launchpad.net/ubuntu/+source/iproute/+bug/105521 The easiest way to reproduce it is to start an Ubuntu 6.06 LTS Live on a system with three

Hello. I wonder how just correct couple of spdadd commands like spdadd 192.168.1.0/24 192.168.2.0/24 any -P out ipsec esp/tunnel/10.1.0.1-10.2.0.1/require; spdadd 192.168.2.0/24 192.168.1.0/24 any -P in ipsec esp/tunnel/10.2.0.1-10.1.0.1/require; makes _routing_ of packets from 192.168.1/24 into 192.168.2/24. If I understand correctly how it works on *BSD, these commands with make already