similar to: kernel & automount errors in messages log

Listmates, I have had a few boxes where the 'matchname' message is filling my syslog with one new message ever ~40 seconds or so. No performance problems, just the log annoyance. An example of the messages are: Jan 11 13:43:03 nemesis smbd[2246]: [2010/01/11 13:43:03, 0] lib/util_sock.c:1685(get_peer_name) Jan 11 13:43:03 nemesis smbd[2246]: Matchname failed on Adrienne-PC.rbpllc.com

Hi, on a system RedHat 8.0, only on this, not on other various RedHat8.0, I have see the follow strange error in /var/log/{messages,boot.log} ..... After the boot all it seems to work, the modules is loads.... I have already tried to install other versions of kernel but the problem is always the same one :-(( Someone has some idea of what is happening? Thanks... Dario Lesca

I never thought it would happen to me, but it did... I have read threads about slow copies from WinXX to Linux/Samba on the list in the past, but I don't recall a concise answer regarding what the cause was. THE PROBLEM: Trying to copy an 8 meg file from Win95 to my Linux/Samba box (named "Nemesis" - for good reason), the transfer speed slows to a crawl. The Win95 copy dialog box

On Sat, Jun 8, 2013 at 7:16 AM, upen <upendra.gandhi at gmail.com> wrote: > > > > On Sat, Jun 8, 2013 at 1:44 AM, Geert Stappers <stappers at stappers.nl>wrote: > >> Op 2013-06-07 om 12:20 schreef upen: >> > On Fri, Jun 7, 2013 at 9:29 AM, Geert Stappers <stappers at stappers.nl> >> wrote: >> > > Op 2013-06-07 om 06:18 schreef

Here's the bootup log area from a CentOS 4 box, fully updated. Seems to start into the US eastern time zone properly, but then it set's itself back to I think UTC after the filesystem check. May 14 14:49:12 visit1 fsck: /var1: recovering journal May 14 14:49:16 visit1 fsck: /var1: clean, 10074/4227072 files, 798409/8445596 blocks May 14 14:49:16 visit1 rc.sysinit: Checking filesystems

Op 2013-06-10 om 09:48 schreef upen: <snip/> > > > My dhcpd.conf now looks like this: > host rhelclient { > site-option-space "pxelinux"; > next-server 192.168.0.100; > option pxelinux.magic f1:00:74:7e; > option pxelinux.configfile "linux-install/pxelinux.cfg/default"; > option pxelinux.pathprefix

--------------------------------------------------------------------- Red Hat, Inc. Red Hat Security Advisory Synopsis: New Zope packages are available Advisory ID: RHSA-2001:115-05 Issue date: 2001-10-02 Updated on: 2001-10-09 Product: Red Hat Powertools Keywords: Cross references: Obsoletes: RHSA-2001-065

Hello Everyone, I am having trouble with booting a soekris 4826 board.after setting up my tftp,dhcp and web servers ,I log into the board using minicom and type boot f0,which doesn't quite work out. > boot f0 NSC DP83815/DP83816 Fast Ethernet UNDI, v1.03 Copyright (C) 2002, 2003 National Semiconductor Corporation All rights reserved. Pre-boot eXecution Environment PXE-2.0 (build 082)

On Mon, Jun 10, 2013 at 11:17 AM, Geert Stappers <stappers at stappers.nl>wrote: > Op 2013-06-10 om 09:48 schreef upen: > <snip/> > > > > > My dhcpd.conf now looks like this: > > host rhelclient { > > site-option-space "pxelinux"; > > next-server 192.168.0.100; > > option pxelinux.magic f1:00:74:7e; > > option

Mates, The saga continues, but THANK GOD 'make revert' WORKS. Here is my problem. I am trying to compile 3.0.7 from source and install it on my Mandrake 7.2 box. The gcc compiler is 2.95.3. Here is what I have done: [stop samba] # ./configure --prefix=/usr --with-smbmount # make # make install # /etc/rc.d/init.d/smb start Here is what I get: [root@Nemesis david]# tail

Hi all, i have trouble to PXE boot KVM-based (network of Linux-bridge) Virtual Machines: very slow transfer pxelinux.cfg. ====== tcpdump on KVM host system ==== [root at kvm-test01 ~]# tcpdump -i virbr1 | grep -v ssh | grep 10.0.5.187 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on virbr1, link-type EN10MB (Ethernet), capture size 96 bytes 17:57:29.809278

Hi, I'm trying to boot a clean machine(hostname=dgrid-5.srce.hr) with 3com 3c905b NIC (ver4.30 MBA) with pxe. Server: hostname: dgrid-1.srce.hr pxelinux.0: syslinux-2.08 tftp: tftp-hpa-0.36 dhcp server: dhcp-2.0pl5-8 Client: boot option: DHCP Client machine successfully gets pxelinux.0 and then everything stops(see listing below). I've tried with xinetd-2.3 and

Hi, I'm seeing a strange problem when using pxelinux - it loads OK initially and finds pxelinux.cfg/default, but then hangs. Looking in the server's /var/log/messages, I find this: Mar 18 14:01:38 fal000phys02 tftpd[24310]: tftp: client does not accept options Mar 18 14:01:38 fal000phys02 xinetd[6441]: tftp service was deactivated because of looping If I reload xinetd twice, tftpd

Is there a known bug that samba has on older machines in low memory environments? I have set up a 486 with 24Mb of memory with RedHat 7.1. I set it up to run dhcpd, xinetd, and samba. Samba was not run through xinetd. The samba server had a tendency to crash the machine if a large upload was sent to it. Occasionally, it wouldn't crash, but windows would error and stop uploading. No problems

I'm setting up UEFI booting and got to the point of having the system talk to the dhcpd/tftpd server, grab the first image files (syslinux.efi) and then continuously request the secondary image file (ldlinux.e64). I'm wondering if I'm missing something or if someone can point me in the right direction of trouble shooting this. The tftp root has all the files to boot a BIOS type

Hi, I have refered to ur documents for creating a Diskless node in linux ,but could not get through the installation . The exact problem that i am facing is mention below , also, there r few queries, which i would be greatfull if u can answer First let me explain u what i have done . I am trying the configuration with one server machine and one client. server configuration 256mb ram AMD Athlon

Hi ALL Has anyone any insight as to why RedHat Enterprise Level 5 is broken as far as PXE booting is concerned. Is there a Protocol communication problem ???????? Are there alternative tftp-severs that work for the RHEL5.. It seems: the PXE CLIENT when booting cannot access files in the "pxelinux.cfg" dir RHEL4 works just fine !! ( kernel 2.6.9-22.EL) with

Hi *, as this is my first post I want to say hello to everybody. Well, and unfortunatly I''ve already got a question for you: I''ve installed a guest domain (OS: CentOS 4) on my xen-machine and it''s para-virtualised (just to provide the information ;) ). After the installation and mount the image containing the guest to copy the necessary modules for the xen-kernel,

At 4:00 every morning the 2 WinXP machines on my network generate a slew of queries to bad printer names. These names are variations on the name of a valid printer exported by Samba. Samba v3.0.10 is running on a RHEL4 system. It exports several shared drives and a single printer. The printer is named "lj4500", is managed by CUPS v1.1.22, and works correctly via Samba from both

My /ect/dhcpd.conf looks like following: # Sample /ect/dhcpd.conf ddns-update-style ad-hoc; allow booting; allow bootp; #default-lease-time 600; #max-lease-time 7200; option subnet-mask 255.255.255.0; option broadcast-address 10.0.0.255; #option routers 10.0.0.1; option domain-name "nfs.jun"; subnet 10.0.0.0 netmask 255.255.255.0 { range 10.0.0.1 10.0.0.100; } group { next-server