similar to: ppp and Samba

samba@samba.org Giulio Orsero <giulioo@pobox.com> Mike Quin <m.r.quin@stir.ac.uk> Matthew Halliday <matthewh@fesa.co.uk> Carsten =3D?iso-8859-1?Q?Nordstr=3DF8m?=3D Jensen <north@get2net.= "Carlos Vinueza M." <carlos@ecuadorexplorer.com> Eric Dahnke <edahnke@istreetlabs.com> Giulio Orsero <giulioo@pobox.com> Giulio Orsero

I don't know if this is Samba related, but I figured those monitoring these lists were the experts at Win-95 networking and Linux/UNIX TCP/IP. I have a RedHat 5.0 i386 machine acting as a PPP server for Win-95 dialin users. The only Win-95 service running is TCP/IP (no IPX, no NETBEUI), so users can POP their mail, telnet to machines on the LAN, etc. The next hurdle is to allow Network

We're trying to get samba running on a RH 6.1 server installation, runnijng as a trial. So far we can only see the server on 2 NT 4/SP4 workstations and not on the Windows 95 clients, and then only if we do a Start/Find/Computers. I can map a drive to a share, and can reconnect to it after rebooting the NT workstation, but can't see the server in Network Neighborhood. TCP/IP is

I'm trying to set up a Linux-based dialin server on our company network. I'd like to have PPP authenticate using winbindd, if possible. I feel like I've almost gotten it to work, but I can't quite get there. Files: /etc/pam.d/ppp: #%PAM-1.0 auth required pam_nologin.so auth sufficient /lib/security/pam_winbind.so account required

Hello, A client of mine has this ancient software called VideoPrinter (working on Win98) and an ancient hardware that connects to the PC through both LAN cable and serial (COM) cable. I decided to give this software a try with wine 0.9.60 running on Slackware 12, kernel 2.6.23.4. The software installs without problems and after adding the appropriate registry keys the COM is recognized. But the

HI all ! I've read in a doc, that Samba is talking only with the clients where Netbios over TCP/IP is running ! I guess it is true, but are there any solution maybe to connect with a client where only the NETBEUI is the only one installed protocol ? It would be from DOS, I have a DOS boot disk which is waking up the Netbeui, and it would be difficult to prepare it to wake up the TCP/IP !

I am running Samba 2.2.8a on solaris 5.7 machines. I have had 2 subnet working just fine for years. I'm trying to add a 3rd subnet. I am having a problem with my XP machines on a third subnet. I have changed the registry so: requiresignorseal = 0 and requiresecurechannel = 0 and rebooted. and Enable NetBIOS over TCPIP is set. I have two XP machines one with NETBEUI install and one without

My thanks to those who've helped me in the last few days. I've had some big breakthroughs and may now be able to help one or two others. My next task is to set up Samba to log users into their shares on a mapped drive that will be commonto all machines - eg. h:\. So I have 4 user shares, and a common IT share that we can all use. It works fine on my NT4 machine and logs me in on

Hello all, There is still a use for netbeui (non-routed protocol) in the network. If you are using a VPN client that does not allow split tunneling, you can still access printers on another local system with netbeui. I would like to remove the windows system and have my print shares on my Linux system with Samba. Is all consideration of netbeui within the Linux/Samba environment gone?

Alex, thanks for your soon answer, but in case I want to configure PPP on this server, what files do I have to configure? Can I login in this server using SSHD over a PPP conection? Regards; Israel > Just terminal access -> I want to login in my linux server connecting > through the modem connected in /dev/ttyS0 Not sure if this is complete. Install mgetty if not already present on

Hello: Is it possible to run SAMBA over IPX/NetBeui? (I will thank any suggestion) I hava an small LAN of 3 computers, connected to the Internet through a Cable-modem with DHCP (the cablemodem and the computers are all connected to a hub). The CableModem assigns every computer a random public IP adress, but usually from diferent range (ie: 212.78.x.x, 62.57.x.x, etc), so I cannot get SAMBA or

Thanks to those who wrote and suggested I remove NetBEUI from my Win95 machines. Here's the next chapter in the story: First, based on another suggestion, I tried "netstat -a" on the Win95 machine "secretary". It didn't show any kind of traffic on ports 137-139 (even though files WERE being shared at the time). Next, I tried removing NetBEUI from

hello everyone. I don't have a network, but I'm trying to get my friend to dialin and use my shares that I have provided via smb. Now I have a big prob with nmbd and ppp. Under Interfaces I can specify ppp* 192.168.0.2 , which is the ip that the dialin user is assigned and yet still nmbd shuts down showing an error that no interfaces were found. # route -n Kernel IP routing

Samba is working perfect on our main subnet, but it won't for any additional subnets on this domain. We use NT authentication and my system is an RS/6000. I just found out that our routers for these additional subnets have netbeui/netbios turned off. Network Admin. said it's because they're set not to allow broadcasting (and they're not going to start), and turning

Can SAMBA be used on Solaris9/SUN OS 5.8 to emulate a MicroSoft NetBeui client and thereby print to a print server. I have a printer(ps) that is netbeui only and want to print to it from a Sparc station. lp and lpr are not available by TCP/IP. Please respond off the board(direct-mail) as I'm sure this is too basic for most users and I did not subscribe to list. I did search the archives and

I cannot print across my subnets using microsoft win9networking. I have two subnets 192.168.0 & 192.168.1 of which the linux running samba server is the router using two ethernet cards . Workstations on both subnets share their printers from win95. Win95 machines from both sides of the subnet can telnet to both ethernet cards on the server and can also ping all machines across the two

Hi out there... We just had a hub go down in spectacular fashion - lots of smoke, VERY bad smell, no network connection, melted plastic - very exciting stuff on a dull afternoon! But - it took out the smbd daemon and all those processes running from the affected PC's with it. Why would it do that? I couldn't get the smbd to start either by "killall -HUP inetd" or by

I think this has been addressed a few times, but without quite satisfactory results. I have a private subnet behind an NAT proxy server (IPMASQ), and a public subnet on the other side with the NT PDC on the public. (Using both NetBEUI & TCP/IP). The PDC will change later, but currently I'm trying to find out how this all works before I do that. I'm trying to make a client machine on

Hi, I replaced my old Windows NT box runnig as PDC with a Cobolt Qube 3 and Samba-2.2.2-C1. Cobalt Linux version is 2.2.16C33_III+VPN. With the WinNT as PDC, all windows client's in the network had only TCP/IP protocol installed and they were able to browse the network and see each other. With Samba running as PDC, TCP/IP only is not enough to browse the network. I had to install NETBIOS

Hello, I am looking for the first time at setting up Linux with Samba as a primary server on our network. I would like to replace my SCO Unix system and a Windows box I use to serve MSDOS machines. The MSDOS server seems to be the stumbling block at this point in my research. I can only run netbEUI on them as far as I know and Samba seems to only talk on TCP/IP. Do you know of a solution?