similar to: New to list

Hi all, This is the first time I used Dovecot and it's perfectly run : dev# ps ax | grep dove 77332 ?? Ss 0:00.30 /usr/local/sbin/dovecot -c /usr/local/etc/dovecot.con 77333 ?? S 0:00.10 dovecot-auth 77334 ?? I 0:00.02 dovecot-auth -w 81495 0 S+ 0:00.00 grep dove But when I try to connect to Dovecot's POP3 Server : dev# telnet 127.0.0.1 110 Trying 127.0.0.1...

Hello. First of all I ''m pretty new to Linux and this is my first install of Xen. So don''t mind me wrong if sometimes I don''t know which command is appropriate to fetch results. I''m running a new Debian Squeeze release 2.6.32-5-xen-amd64 with minimal components. I''ve been going through install of Xen as per the documentation for the 4.2.1 release and

Hi Arnaud, hi all I wish you all the best for 2006. Enjoying of some less stressed time, I follow your advice, Arnaud, to switch our UPS management on the newhidups driver. ( Enfin ! ;) Our goal is to support (soon) the new MGE ASR ELLIPSE ( and of course also the old ELLIPSE and EXTREME models ). I rebuild the libusb-0.1.10a packages to conform to our installation process. I perform the same

Ok, I installed the ups, and installed nut, and /proc/bus/usb/devices says this T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=06da ProdID=0002 Rev= 0.01 S: Manufacturer=POWERWARE S: Product=Powerware UPS C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 20mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00

Folks, I'm fairly new to this whole Linux UPS thingie, but I'd quite like to have a look at getting my UPS to work under Linux and would be grateful for any help in getting a driver. I have a reasonable working knowledge of Linux and software development, and thus am happy to modify config files, alter kernel settings, etc, although I'm no C guru. I have a Kebo UPS-650D, which

I have a Belkin F6H500ukUNV ups that I am attempting to get working under nut, however it does not appear to be detected by nut, I'm assuming that I need to feed some information back to you guys to get it included in the database somwhere. I've included (what I can think might be) the relivant outputs. Please let me know if you require anything else. dmesg output /sbin/newhidsups

Hi. Is the subject UPS model supported? I believe so, but I don't have a unit to test with. Any comments on this model? I'm trying to advise a colleague. Thank you, as always. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=051d ProdID=0003 Rev= 1.06 S: Manufacturer=American Power

Hello, I have an UPS Hunnox HNX-650 (http://www.hunnox.com/), but it's not quite running yet with NUT. Any hints? Thanks... Some info: * lsusb: Bus 005 Device 003: ID 0001:0000 Fry's Electronics * usb-devices: T: Bus=05 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 3 Spd=1.5 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0001 ProdID=0000 Rev=01.00 S:

i can't seem to get newhidups to detect my UPS.. i'm using nut-2.0.3 (tried both the rpm from fc5-updates and compiling my own) here is the entry for the UPS in /proc/bus/usb/devices T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0764 ProdID=0501 Rev= 0.01 S: Manufacturer=CPS S: Product=UPS

- UPS MGE Premium Ellipse Premium 1200 - SuSE Linux 10.0 OSS, kernel 2.6.13 smp - gcc version 4.0.2 20050901 (prerelease), glibc-2.3.5-40 - mgeups-psp-3.0.0-3, nut-2.0.2-4 - Dell Dimension 8400 with dual core Intel Xeon. 3.0GHz. lsusb shows: Bus 002 Device 003: ID 0463:ffff MGE UPS Systems UPS less /proc/bus/usb/devices shows for bus 2 device 3: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=

Hi, I'm trying to get a Powerware 3105 UPS working on SuSE 10.0. I have compiled nut from the current Subversion repository. This UPS uses the bcmxcp_usb driver. I cannot get the driver to find the ups on the USB bus. The error message I get is:- -------------- bcmxcp_usb -u nut -DDDDD -a pw3105 -------------------- Network UPS Tools - BCMXCP UPS driver 0.10 (2.1.0) debug level is

maybe i have solved this issue, i unplugged APC BackUPS from USB 2.0 and PLUGGED INTO USB 3.0 and now it works prefectly at first time without any side effects, strange, this shoud be working since USB 1.0 so ups driver is configured OK, this config works ok for backups, this looks like there is no problem with detection of UPS but with USB driver or something around so simply if somebody has

Hi, I have plug in this USB network device: > Bus 001 Device 002: ID 2001:1a02 D-Link Corp. > T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 > D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=2001 ProdID=1a02 Rev= 0.01 > S: Manufacturer=D-Link > S: Product=DUB-E100 > S: SerialNumber=E5ECEB > C:* #Ifs= 1 Cfg#= 1

Hi There, I''ve installed xen 3 and xen-tools on my Debian etch server and all seems well, until I try to start a guest domain. debian:/home/xen# xm create /etc/xen/D4G3.cfg Using config file "/etc/xen/D4G3.cfg". Error: Device 2049 (vbd) could not be connected. Backend device not found. I get the error: "Error: Device 2049 (vbd) could not be connected. Backend device

Hi Does there exist any work on getting the powerware driver to work with USB devices under freebsd? I have tryed with the usb enabled newhidups driver for freebsd but it does not seem to work. $ newhidups -a newhid -DD Network UPS Tools: New USB/HID UPS driver 0.23 (2.0.2) debug level is '2' found 0 (-1) No USB/HID UPS found //erlis -------------- next part -------------- An HTML

Hi Georg, > one question with regard to a Powerware 5115 UPS connected to a Debian 3.1 > Sarge box via USB: I downloaded and compiled nut 2.0.2 but I am unable to > configure the USB subsystem so that upsdrvctl recognizes the UPS. > > My /usr/local/ups/etc/ups.conf contains: > > [bla] > driver = bcmxcp > port = /dev/usbdev2.2 > desc = "bla bla

Now that I have a working kvm setup, I thought I'd finally try how Zimbra works. This is mainly some microbenchmarking, so it may not have much to do with actual performance in real life. Setup: - 1GB memory given to kvm (from host's 2GB) - Intel Core 2 6600 (kvm uses only one CPU) - CentOS 5 - 15GB qcow2 image on XFS filesystem - Zimbra 5.0 RC2 RHEL5 x86_64 - Dovecot latest hg,

*********************** Your mail has been scanned by InterScan MSS. *********************** Has anyone managed to get this UPS to work? I am using the laster development nuts. My /proc/bus/usb/devices content: ==== cut ==== T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=ffff ProdID=0000 Rev= 1.00 S:

When I built this new Centos 5 drive, I copied over much of my old data using cp, and did not use the -preserve option. Ouch. I need those file create dates so that documents and such sort properly, historically. I recovered much of my stuff from a tar built back in mid-May (but I missed that the tar backup ended abnormally, as I was tar-ing to a USB attached drive formatted FAT32, and at

The Asterisk Development Team has announced the release of libpri 1.4.11.5. This release is available for immediate download at http://downloads.asterisk.org/pub/telephony/libpri/ The release of libpri 1.4.11.5 resolves several issues reported by the community and would not have been possible without your participation. Thank you! The following are some of the issues resolved in this release: