similar to: syncing remote browse lists over nat

Last problem I had involved changing one character in my configuration scripts. Really easy once someone showed me what was wrong. Well I think this issue is just the same. The moment I used apt to install the Xen kernal and tools I lost internet connectivity. I have been managing because I can restore connectivity be deleting the bridge mpower@dodtsair:~$ sudo ifdown eth0

Guus, Thank you for your help (a)>>You said:- First, if you are already using "ip" to assign an address..... Why should I use "ip route" instead of "route add..." Surely both write same to the Routing table? (b) My problem was, that Tinc servers could not ping remote clients, whereas clients could ping successfully across VPNWhen pinging Client to Client

Thank you, Parke and Guus. I have now understood and got it working. Because of my beginner belief, I assumed that the tinc vpn end points needed to be on the same network. I have now discovered that the tinc vpn IP end points addresses can be arbitrary, and different! So I have set the end points to be local to the LAN they connect, and added on each tinc server a dev route to ensure

I have a three tinc server setup, similar to "4.3 How Connections Work" using the configuration mostly likehttp://ostolc.org/site-to-site-vpn-with-tinc.html The clients (Ubuntus, Debians and Windows 10s) can all ping (and SSH) to each other remotely. As far as that is concerned it's working great - thanks so much for some great software. However, on each of the Tinc servers (A and

Hello All, Is it possible to serve up files anonymously via a folder of my choosing on demand? >From time to time where I work, we transfer large file heirarchies between co-workers and contractor workstations, and we've gotten away with tar'ing things up or using something like webfs (or Python -m SimpleHTTPServer) on one end and 'wget -r http://remote-server' on the the

I have 3 domains, A & B on 1 IP subnet, and the C is spread across 2 subnets. Samba is running on the Linux box that routes the 2 subnets for domain C. Its joined up to the C domain, and is in the C workgroup. Its also the WINS server, and local master (but not Domain Master, the NT PDC has to be). It serves WINS for all 3 domains. Domain C (the one Samba lives in) shows in the browse

Running Samba mostly on Redhat 5 with version 3.5.4-0.83 Also failed on Debian 3.5.6 and Solaris with a 3.5 version. Logging details here are from Redhat case. We have a similar problem on all Unix/Linux systems using ADS as the backend authentication for samba shares on Unix/Linux. It was working before today and we didn't change anything. Today, any time we try smbclient or a Windows drive

Hi! sorry my english (soy de Argentina) This is my scene: ISP 1: IP X.X.X.7/28, GW X.X.X.1 ISP 2: IP X.X.X.22/30, GW X.X.X.21 LINUX SERVER: eth0, ISP 1 (default) eth1, to intranet 192.168.1.0/24, 192.168.6.0/24, 192.168.50.0/24 (aliasing) eth2, to intranet 192.168.8.0/24, 192.168.9.0/24 eth3, to intranet 192.168.0.0/24 eth4, ISP 2 eth5, to intranet 192.168.11.0/24, 192.168.12.0/24 I need two

Is 'remote browse sync' only for syncing browser lists between SAMBA systems. I currently have 'remote browse sync' pointed at a W2K system (browse-master) on another subnet and I see from the nmdb.log that a request was received from that system for ' ...process_name_query_request( ...' and then '... Sending backup list for ...'. But the Browse lists

Hello, I need to use WINS browsing to allow Mac computers to list Windows served printers. Mac clients and Windows print server (Windows 2012R2) are on separate subnets: - Mac clients on 10.1.0.0/16 subnet - print server on 10.10.0.0/16 subnet A Samba server (10.1.10.24) is a master browser on subnet 10.1 and another Samba server (10.10.31.73) is a master browser on subnet 10.10 each server has

HELP! I am becoming quite frustrated with trying to set up remote browse sync. I have several subnets and ONE workgroup. I want one host in the entire workgroup to have a complete browse list that it has collected from all of the local master browsers. One the master: local master = yes domain master = yes On one clients in each subnet: local master = yes remote browse sync = 1.2.3.4

Hi, I have a network with three different sites, each with their own workgroup, each on their own subnet, connected by a VPN. Each site has a master samba server, acting as a domain master and wins server. Each site has a mixture of Windows (mostly 2000 professional) and linux workstations on each workgroup. I am trying to get all workgroups and all machines viewable in 'network

On 03/04/15 00:27, Andrey Repin wrote: > Greetings, All! > >> I'm trying final steps of my long upgrade process, but I've got hit by the >> unexpected. >> When everything seemingly run fine in the end, I'm unable to browse the local >> shares of the DC. >> # smbclient -L localhost -U% >> Domain=[CCENTER] OS=[Unix] Server=[Samba 4.1.11-Ubuntu]

I'm not sure where else to turn for this, I've seen this problem mentioned in a multiple places but haven't seen any resolution for it. Below is what's showing up in my remote samba WINS server. My setup is that I've got the samba servers connecting through a dedicated VPN. I've set up the WINS to allow for browsing across the VPN. If anyone can help me out or point me in

Greetings, All! > I'm trying final steps of my long upgrade process, but I've got hit by the > unexpected. > When everything seemingly run fine in the end, I'm unable to browse the local > shares of the DC. > # smbclient -L localhost -U% > Domain=[CCENTER] OS=[Unix] Server=[Samba 4.1.11-Ubuntu] > Sharename Type Comment > ---------

We've got two samba servers either side of a modem link and I'm trying to get them to sync browse lists. Using remote sync and friends the servers try and sync but invariably each time one does the other end rejects the `browse sync sessionsetup' i.e. sync_with_lmb: Initiating sync with local master browser BOX1<0x20> at IP 192.168.1.2 for workgroup WORKGROUP 04/06/1998

Folks, I'm confused with those whole samba/security thing. I'm running the latest SAMBA without encryption and default share security. As a result, I can't get my NT PDC to sync browse lists with my samba server, which is on a different subnet. I get the following error in log.nmb: sync_browse_lists: NT-SERVER0 rejected the browse sync sessionsetup My goal is to force those who

I'm having two problems. I encountered the second while trying to set up a clean environment to work on the first. Can somebody tell me if (a) I've done something obviously wrong, or (b) this is a known Samba bug? Any help is appreciated. John. First problem: From nmbd: domain_master_node_status_fail: Doing a node status request to the domain master browser for workgroup

I have been fighting, for 2 days, with a Dovecot setup and I now officially need help :) Basically, I am trying to setup replication between 2 identical Dovecot servers, on different physical servers (different hostnames/etc, of course), and although I've managed to solve many problems I can't overcome the final hurdle. When a mail comes in to one of the servers, replication over TCP

Hello ! I have a problem of syncing browse lists between DMB and LMB. The topology of ours network is as follows: Linux Network comma(Linux, DMB, WINS) vol(Linux) door(Linux, LMB) | | | | | | | | | --------------(195.226.226.16/28)------ | | | | | | | --(local net