similar to: Problem with smbclient

I'm a new linux user trying to run samba on Linuxppc R5 but smbd doesn't appear to be responding properly. Both nmbd and smbd are configured as daemons and netstat lists netbios-ssn as listening. I can't find anything else that would conflict starting from inetd. Nmbd appears to work as I can list the available servers and the server is seen by the clients but I don't need

I haven't been able to get samba to start at all.? I have started clean several times, all with the same results.? Here is a dump of the error I get when trying smbclient -L. ? thanks, adam -------------- next part -------------- doing parameter max log size = 500 doing parameter socket options = TCP_NODELAY doing parameter local master = No doing parameter comment = Samba %v doing parameter

--- samba@samba.org wrote: > SAMBA Digest 2218 > > For information on unsubscribing see > http://samba.org/listproc/ > Topics covered in this issue include: > > 1) > by "Brandon Schnell" <brandonschnell@hotmail.com> > 2) AutoCAD R14 and Eagle Point > by Hank Burton <wburton@literati.com> > 3) Can't locate point and

Hi All, Here's an interesting one... I need to be able to connect smbclient on a linux machine to a dos based machine, which is running MSCLIENT and the WG1049 patch. I can browse to the machine and see all the files from Network Neighbourhood in Windows, but if I try and go in with: smbclient \\GAUGE1\C, or even just smbclient -L GAUGE1 all I get is: Added interface ip=10.0.1.1

Hello, everyone! I set the samba running on my sun ultra2 with solaris2.6. Seem every thing works. I can share the directories and PC can share unix printer too. But the unix can not use PC's printer. when I try to directly use the command smbclient to print, I get following error. Antone can give me a hint? Thanks!! Feng Qiu server:Feng 33>cat filename | smbclient \\\\Qiu\\epson -N -P

HI, I have a problem when installing samba 2.0.3 on IRIX 6.4. If I use the standard IRIX C compiler with -n32 option, all goes OK. But if I use gcc with version egcs-2.91.60, then samba(d) does not run correctly: if I try to connect the smbd (with smbclient), I receive the output below. Does somebody have the same problem? /usr/local/samba/bin/smbclient -L origin -d 5

> Hi, > I'm trying to setup Samba 2.0.2 in security=domain mode. My machine name > (softy) has been added as a member of the domain (waterloo). The > smbpasswd -J option keeps giving me an error: > > /usr/local/samba/var# ../bin/smbpasswd -D 3 -j WATERLOO > resolve_name: Attempting lmhosts lookup for name 53SVR1<0x20> > resolve_name: Attempting host lookup for

I am an newby to samba, and I have a user who is getting permission denied when he attempts to copy files from his PC to his UNIX account. Everything appears to be working correctly on the samba server. I believe he is the only one having a problem. I found this message in the log.smb file after his copy attempt: libsmb/namequery.c:resolve_name(644) resolve_name: unknown name switch type

Hi: I'm running Samba 1.9.18p10 on a RedHat 5.1 linux with kernel 2.1.124. My compile options were: -DLINUX -DALLOW_CHANGE_PASSWORD -DFAST_SHARE_MODES -DNO_ASMSIGNALH -DGLIBC2 (incidently, I had to edit includes.h somewhat to get stuff to compile under this config. There were several definition conflicts and missing defs.) Whenever I make a smbclient connection to our nt servers, my

I've attempted to change my smb password on a remote NT PDS, but it always fails with resolve_name: Attempting lmhosts lookup for name SERVER<0x20> getlmhostsent: lmhost entry: 127.0.0.1 localhost resolve_name: Attempting host lookup for name SERVER<0x20> Connecting to nnn.nnn.nnn.nnn at port 139 error connecting to nnn.nnn.nnn.nnn:139 (Connection refused) unable to connect to

I'm trying to setup samba 2.0.3 server on AIX 3.2.5 box using DIAGNOSIS.txt and on test 3 i'm having problems. This is what i have on command line: smbclient -d 4 -L alenianola Added interface ip=190.20.200.200 bcast=190.20.255.255 nmask=255.255.0.0 Client started (version 2.0.3). resolve_name: Attempting lmhosts lookup for name alenianola<0x20> startlmhosts: Can't open lmhosts

Hi folks, I'am using Samba 2.0.0 on a Linux and a Sun box and i have the following problem: I can log in from a smbclient but not from an NT Client using Security=Domain. 1.) Doubleclick on the machine opens the password dialouge (which should'n appear, beacuse i'am already logged in the domain) Enter my domainusername and password. Window dissapears and appears again and forces me

Hi, well once u try lot and no good result is time to ask. My friends I want to make to domains running samba+ldap to share resources, I want to create a trust relation in two directions. Both domains have wins enable but are on different subnet. Domain Name: DOM1 Netbios Name = DOM1PDC 192.168.50.0/24 Domain Name: DOM2 Netbios Name = DOM2PDC 192.168.40.0/24 Both networks are separate,

> > > My friends I want to make to domains running samba+ldap to share > resources, I want to create a trust relation in two directions. Both > domains have wins enable but are on different subnet. MUST use the same WINS server for trusts to work. Why have two domains? > > > > Domain Name: DOM1 Netbios Name = DOM1PDC 192.168.50.0/24 > Domain Name: DOM2 Netbios

Hi! I am trying to print from an NT machine to a simple samba printer. That NT machine is the PDC and the samba box is having logins authenticated by the NT box. When I try to access the printer with my own username, it works fine. As soon as I have the account that is destined to do the printing print, it can't log in. I have included my smb.conf file and two log excerpts - one successful,

I can't map a disk in Sun Solaris. When i run smbclient, I got this message: # /usr/local/samba/bin> ./smbclient -d10 -L bahq31 Added interface ip=10.0.28.44 bcast=10.0.28.255 nmask=255.255.255.0 Client started (version 2.0.5). resolve_name: Attempting lmhosts lookup for name bahq31<0x20> getlmhostsent: lmhost entry: 127.0.0.1 localhost getlmhostsent: lmhost entry: 10.0.28.44

Sorry I don't think my first trial worked I am just starting to use samba, and I keep running into the same problem time and again. I have installed SAMBA 2.0.2 correctly and have (i think) a correct smb.conf file. Now when I try to log on to one of my shares it will not let me in. I get the following errors when logging in: [dutchboy@lisa dutchboy]$ smbclient \\\\lisa\\dutchboy doing

I am having problems connecting mapped network drives to shares on a Samba server running on a RISC/6000 AIX 4.2.1. This has been working for several months and I cannot for the life of me figure out what has changed. When executing 'smbclient -d5 -L HostName' I receive the following messages: 1999/05/19 14:30:32 client started (version 1.9.18p10) Initialising global parameters

Hello Samba Gurus, I am running FreeBSD 2.2.6-STABLE and Samba 1.9.18p8. I am unsucessful in logging into the server (from Windows or UNIX using smbclient). I turned the logging to level 10. Here is my info: When I start samba 1.9.18p8: su-2.01# more /var/log/samba.log lp_file_list_changed() file /usr/local/samba/lib/smb.conf -> /usr/local/samba/lib/smb.conf last mod_time: Mon Jun 29

Hi all, I recently loaded Samba 2.0.3 on AIX 4.3.2, everything seem to be working fine except that every now and then a user will be prompted that the username/password was incorrect. After trying to enter the username and password their domain accounts are locked. Up until this point they were connecting with out any problems. They will have their account reset and everything is ok again for a