similar to: read/write of Excel file is denied

How do i unsubscribe??

Hi all, My NT environment cannot recognize my SAMBA servers(Bad IP address when ping from MS DOS prompt) and after I restarted the nmbd daemon it can see my SAMBA servers. Does anyone know why this happens? Is it there is a change in the WINS server's database? Please advise. thanks & regards, Bridget

Hi, is there any possibility to get a XEN DomO and DomU running with bridget and routed mode together. The reason behind this is, to get the requests via the official IPs to the DomU''s (routed-mode) and the interworking between the DomU''s with connected with help of the (bridged-mode). I got it work, with setting everything up manually. But as I understood the

Hello all. Please, I'd like to know if somebody can help me with this problem. I have successfully configured a PBX with Asterisk 1.4 and a Digium analog card with 4 ports. This PBX has a lot of incoming and outgoing calls, and works perfect in general, but there are some extrange cases where an incoming call is bridget with an outgoing call, and the caller that is calling TO the PBX can

I just created arch linux xen 4.2 unstable package so it compiled fine and installs fine. When I run xl create it starts vm. I have vif devices created but they don''t attach to bridget that are created on startup . I have xenbr0 and xenbr1 created. If I run this I get vifi attached ro bridge. Is this xl issue or python. # export vif=vif1.0 # export

Hello everyone, I have a problem regarding gre tunneling, I have two linux box both of them has a private network and the linux A is connected to the internet via wireless radio and the other linux B is connected to the internet via lease line. Here is the setup of my two linux box Linux A eth0 = 203.189.x.1 (internet) eth1 = 192.168.1.1 (going to hub private network) Linux B eth0 = 205.198.x.1

samba@samba.org ????????: > SAMBA Digest 2226 > >For information on unsubscribing see http://samba.org/listproc/ >Topics covered in this issue include: > > 1) RE: weird printing problems. > by "cbrink" <cbrink@allsportssupply.com> > 2) Re: weird printing problems. > by "John J. LeMay Jr." <jlemay@njmc.com> > 3) Connection

Hi, I am tring to us ip route to load balance between two interfaces. ip route add equalize 10.200.1.0/24 nexthop via 10.200.0.2 dev neta nexthop via 10.200.0.2 dev neta2 Where neta and neta2 are gre tunnels. Testing show that packets travel in a single sided manner. Do I need to use the multipath (IP_ROUTE_MULTIPATH_CACHED) module? thx jason

Hi, I have the following setup. Two linux systems with two [test] external interfaces encrypted with ipsec [transport]. Two gre tunnels that pass 10.200.0.0/24 and 10.200.1.0/24 network traffic. Testing the balanced tunnels I would setup iptraf on one and ping from the other. The results would be as expected; traffic would be split between the two interfaces. Testing with an ftp transfer of

I?m a PhD student at the University of Warsaw, and have started using R. In many books they specify to use <- instead of = when assigning values, and this is also mentioned in older posts on the R website. However, it seams to me that some update has occured, becuase I continously get the same result wether I use <- or =. I would be extremely helpful for any answer to this. = seams more

Hi all, Hey all, I just installed 2.2.1a rpm for RedHat 7.2, and quickly configured it. I cannot join from Windows XP [global] workgroup = Linux guest account = nobody server string = Samba Server hosts allow = 192.168.0. printcap name = /etc/printcap load printers = yes printing = lprng log file = /var/log/samba/%m.log share modes = yes max log size = 0 security = user encrypt passwords = yes

Dear all, I am new in R. I want to read data which is vector from many files and import to many object. For example I have 10(ten) files. file1.txt file2.txt : : file10.txt. I want to import each file into one object as follows. data1 data2 : : data10 I want to import file1.txt into data1, file2.txt into data2, and so on. How to do it quickly? Thanks in advance. Sigit B. Wibowo

Hi, I have a client connected to the ''net through 3 ISP''s. Have set up a Linux box to do routing and load sharing for the 3 connections. A fourth interface is connected to the LAN with private IP addresses. Am using iptables to SNAT traffic to the appropriate IP depending on the interface the packet gets routed onto. The setup looks something like this: Interface IP

Martin, If I understand whay you are suggesting, there is a problem in your design: It will only work if you use Hide NAT. The problem is that the ip_src == IP0 rule is wrong: The ip_src is not changed by the router and it is not equal to the IP of any of the machine interfaces. Can you think of a solution that will work in the following reasonabl scenario: Lets say I have two T1 internet

Dear all at the R-project help list. I have run into a problem when it comes to getting values for "total inertia" and "R-squared" for my DCA using "decorana" in the package "vegan". I have tried the "goodness" function, but the reply indicates that it does not work with "decorana" class objects. In Canoco one gets the Total inertia in

Hi, I have a problem with GRE tunneling. I read Advanced-Routing HOWTO about this and I did all as is written in this documentation. Even the same example is here which I need for my project. I want create (by means of GRE tunneling or IP in IP tunneling) virtual private network VPN - in first phase without IPsec in other phase with IPsec. I have two local networks distant apart with two routers.

Hi all, we are installing puppet client in mandriva os (10 and 2006.0), we installed it with rubygem, anyone have a /etc/init.d script? thanks all

This is wierd. I''m trying to get Ruby/LDAP up and working, and at least the basics work fine under irb: irb(main):001:0> require ''ldap'' => true irb(main):002:0> LDAP::Conn.new() => #<LDAP::Conn:0x1b87ac> irb(main):003:0> So far, so good. All LDAP::Conn.new does is call ldap_init with host and port parameters, which in turn just allocates the

dear all, does anyone know, how to setting swat if i want setting samba from client (access swat from client)? thanks all SS

I am trying to find a way to obtain the fitted values for a model fit using arima() in the ts package. I came across a suggestion in the mailing list archive that these values can be simply calculated as: model<-arima(t, order = c(1,1,0)); fitted<-t-model$residuals; But, the help file for arima() in the ts package describes the residuals values returned as being "standardized