similar to: Samba and NT4 SP3: no write access

I have SuSe 7.0 newly installed, with default/networking packages installed. It is installed on 2nd partition (Win2k on starting cyl's) and use floppy to boot Linux. It is a 333MHz Celeron, 128Mb Ram, 30Gb drive 1/2 for win, 1/2 for linux - lots of room =) I have a Kingston EtheRx KNE100TX adapter, running CAT5 to a LinkSys BSFR41 Cable/DSL router. The only way i could get the network to run

Hello all, I've been following this project with interest, and have had great fun implementing Isolinux within the FreeDOS cdrom distribution. Since I'm not that an expert at Linux, I would like to know how I can *succesfully* generate a bootable image from a partition. Situation is like this: (640MB RAM on system) 60GB IDE harddisk, primary partition 1 win98 500MB extended partition

Hello, I'm an Information System admin. We have a bunch of PC with Windows NT 4.0-SP1(Service Pack 1). Then I'm going to upgrade them to SP3 maybe soon. I set up Samba server at SunOS 4.1.3 without password encryption. My question is, can survive both SP1 and SP3 with pw encrypted Samba server simultaneously? Or, how do I upgrade NT4-SP1 into SP3? I can't imagine upgrading

I have set up everything so that NT4 SP3 users can use my FreeBSD machine as a printer/file share fine. But it seems to me that every user I want grant access to my machine and is it even for browsing only needs to have an account and must run smbpasswd once on my unix machine. How can I let arbitrary users/workgroups let browse my printers? -- Chris Christoph P. U. Kukulies

Hello All, First, I am new to Linux. I am having troubles with NT4 SP3 and samba-1.9.18p5: some NT4 nodes can map Linux and/or Unix drives, some others can't. The errors messages are: - this account is not authorized to login from this station or - incorrect password or unknown username (but I am sure that login/password are ok) I have already check the EnablePlainTextPassword = 1 in the

Dear Ladies and Gentlemen, I am writing to say that the problem reported on Wed 22 April 1998, where NT 4.0 + Service Pack 3 servers repeatedly report they can't get the server list from the Master Browser when using a Samba WINS has been resolved. We found that upgrading from 1.9.17p11 to 1.9.18p4 suppressed the problem reports and also the problems the servers had in viewing the network

sorry if i repost this question, but it's urgent. has somebody an idea? if i broke any rules with this mail, please tell me, what's wrong with it. thx in adv, gk -------- Urspr?ngliche Nachricht -------- Betreff: [Samba] problems with win98 and samba 3 Datum: Fri, 29 Jul 2005 16:24:29 +0200 Von: kurt weiss <maillists@kwnet.at> An: 'samba@lists.samba.org'

Hi, I'm running the Alpha of 1.9.19 (we needed Samba as a domain controller) and want to know the best way to set it up so that the first login for a new user on an WNT workstation in that domain creates the profile we want for the user, rather than the one NT seems to want. 1. The profile created is about .5 Mb in size. The parts that we want in there are maybe 20% of that. How does

It does, at least for a while. But when various more or less well behaved programs enter the scene (harddisk) things changed, at least for me. Reinstallation of R or windows didn't help, and I did not want to start again from scratch with a reformat. I used rw0613. -----Oprindelig meddelelse----- Fra: Douglas Steele <Douglas at dsteele.demon.co.uk> Til: r-help at stat.math.ethz.ch

Looking to make some changes to an old but working LAN, that has about 10 samba servers serving printers and network shares and a NT 4 PDC server with Exchange 5.5 on it. The samba servers are members of the nt4 domain, XP systems are members of the nt 4 domain also. Samba servers are ldapbacked. We use the ldap component directly to login to the Linux servers. I'd like to be able to

>>I have a client in a similar situation. NT4 PDC w/Exchange 5.5 and Samba member servers. Main problem is that >>they're running an old custom Outlook/Exchange workflow app which locks them in until it can be replaced. Similar situation - though we've been able to replicate it fairly easily in google apps. >>As you're aware newer then XP cannot join an NT4 domain

Hi, I'm facing some problems with pxelinux. I have ingetrated it into WDS server. I want to use Network boot all way possible. I want to add Hiren boot disk and NT password editor tools. Is this possible? Currently my network boot includes WDS, Linux install, Win98 Startup disk and ghost 11.5 wPS-DOS. My conf file as follows(*) Also in hyperv virtual machines(x64) pxelinux.com displays

On Sat, 14 Mar 1998 14:40:28 +1100, someone wrote: > >I was wondering if anyone else has seen the problem that I'm seeing with > >the latest version of Samba (1.9.18p3) under Solaris 2.6. I'm using it in > >part to backup about 15 PC clients (all but two are running NT 4) with > >the Amanda backup program. Anyway, the problem is that on occasion > >when

Hi everyone, thanks to John Terpstra's hint (teh old thread started with Msg crn5v6$sh8$1@sea.gmane.org), our xp clients now do join the domain :-). However, they still fail to read user profiles which were created by the old Win98 clients. The relevant parts of smb.conf look like this: ---------------------------- begien smb.conf ---------------------------- [global] domain

Hi everyone! I have a little problem here. First let explain my network topology I have a 192.168.0.0/24 network, with win98 workstations, a NT serving domain and another NT as a WINS server. 192.168.0.3 - NT / WINS 192.168.0.6 - NT / DOMAIN 192.168.0.1 - Internet gateway 192.168.0.2 - Wireless AP 200 that connects to a linux gw ==--==-=-=-==-= AIR :) -- --- == --==--=-- =-=- 192.168.0.4 -

greetings, since i have a test server in front of me and i have never tried it i request your assistance please. ive always been a fdisk and lilo person i have a fresh CentOS 4 "test" install on a WD120 sata /dev/sda /dev/sda1 / /dev/sda2 /boot /dev/sda3 swap and it just so happens i have a old test 17Gig Maxtor PATA with a fresh Win98 on it from helping my father migrate to a newer

Hello, I was wondering if any knowledgeable people might have the answer to this question. We've configured samba on a sun unix machine running 5.5.1. We can connect and login, without any problems, from our Win98 boxes. However, we cannot login or map drives from the network neighborhood from our Windows NT workstations. The error is: "Account is not authorized to login from this

Dear All I have a problem with my Compaq EVO n410c laptop. I want to install Windows (Win98/WinXP) on it. But this laptop don't have any floppy/cdrom to boot from. I have try to use My USB Drive to boot, using syslinux. Here's my step 1. Format the USB Drive using "HP USB Disk Storage Format Tool" 2. Install syslinux (syslinux -f F:). F is my USB Drive 3. Using

There was an interruption in mail service and your memo was not sent. Please re-send your message. Thank-you -----Original Message----- From: samba@samba.anu.edu.au <samba@samba.anu.edu.au> To: Multiple recipients of list <samba@samba.anu.edu.au> Date: Sunday, November 01, 1998 1:24 AM Subject: SAMBA digest 1861 > SAMBA Digest 1861 > >For information on unsubscribing

we're using samba 3.0.11 (updated from 2.2.19) after the update, the windows 98 machines all showing only the short filenames on the server. (on other servers there are long filenames still available). can anybody give me an idea? thx in advance kurt smb.conf: ====================================================================== [global] # 2005-01-05 einbau wixp # vfs object =