similar to: Problems porting Samba from 1.9 to 2.0

Hi, I have a problems and I hope somebody can help me. I currently install samba 1.9 on my Sun Ultra Sparc running solaris 2.6...but my problem is..i cannot find any files by the name "testparm" therefore I am having trouble checking my "smb.conf". Can somebody help me where to look for these files. Sincerely, Aqbal, Department of Hydraulics and Hydrology Fac. of Civil

Hi, I hope somebody can help me dealing with this problem. I have this problem of installing Samba2 into /opt/samba. How can I make the package install to /opt/samba instead of /usr/local/samba2 ??. This is because my hard disk space in /usr/local is about full and my /opt has alot of spaces. Thanks in advance for any help. Cheers Aqbal Rail R.E.S.E.A.R.C.H Fac. of Civil Engineering

Hello, on a v20z, we have as DOM 0 a Solaris XEN on snv44 64bits and we have as DOM U a Solaris XEN on snv44 64 bits. We then install a pseudo driver in the Solaris DOM 1 XEN snv44: installation is ok and driver works as expected. But on reboot of DOM 1, the driver is no more there (in modinfo, driver not found). Is there something special to do after a pseudo driver installation in a Solaris

Running Solaris 8 in a Sun E-250 and when I attempted to upgrade a working Samba install from version 3.0.24 to version 3.0.25a I got this error: ------------------------------------------ # pkgadd -d samba-3.0.25a-sol8-sparc-local The following packages are available: 1 SMCsamba samba (sparc) 3.0.25a Select package(s) you wish to process (or 'all' to

I''m pretty sure this is my fault but I need some help in fixing the system. It was installed at one point with snv_29 with the pre integration SUNWzfs package. I did a live upgrade to snv_42 but forgot to remove the old SUNWzfs before I did so. When the system booted up got complaints about kstat install because I still had an old zpool kernel module lying around. So I did pkgrm

Hello all, I'm in very big big trouble here. In an attempt to enable domain logon for NT workstations as well, I fetched the CVS code on Oct 5, 98. I successful built it with no error. I copied the smb.conf from a workable Sambav1.9.18p8 to the Samba2.0alpha. Then I started the smbd and nmbd of Samba2.0alpha. I rebooted one of the Windows 98 (which used to be working happily with

Recent updates of Virtuozzo Server 6 (fka Parallels Cloud Server 6) have "Virtuozzo tools" instead of "Parallels tools" as their display name in the corresponding Uninstall registry key. Recognize those, too, and schedule their uninstallation on first boot. Signed-off-by: Roman Kagan <rkagan at virtuozzo.com> --- v2v/convert_windows.ml | 2 +- 1 file changed, 1

Bfu 91 to 92 looks good Proceed with xVM upgrade . After running:- # sunos.hg/bin/build-all nondebug bash-3.2# cd packages-nondebug bash-3.2# pwd /usr/tmp/packages-nondebug bash-3.2# ls -l total 20 drwxr-xr-x 4 root root 512 Jun 21 08:57 SUNWlibvirt drwxr-xr-x 4 root root 512 Jun 21 08:57 SUNWlibvirtr drwxr-xr-x 4 root root 512 Jun 21 08:57 SUNWurlgrabber

Hello fellow samba users, Our company uses samba for all fileshares/printing/PDC on two SUN E3500's. We like to replace these with about 10 Linux 19" XEON (pizza)boxes. The question: Are there any implementation out there using a loadbalancing cluster doing samba? A simple diagram of the setup I have in mind: Users (+/- 500) ||| Headnode(Director 1) - Headnode (Director 2) | Worknode -

I've made some changes to buildpkg.sh to make it easier for package builders to add their local changes. I'd like people that use buildpkg.sh to test and comment on these changes before I commit them to CVS. None of the defaults have changed. Some of the patch is is just moving chunks of code to a different location to make some of the enhancements work. Some things you may find

Dear all, I am new to R and to it's programming philosophy. The following function is supposed to work on a vector, but I can't figure out how to do that without looping through every element of it. Is there a more elegant way? Note: I have shortened it, so it is NOT correct from the pipe hydraulics point of view # Calculate wall friction factor # reynolds: Reynolds number # dk:

I was advised someone might be able to help me with this. Very truly yours, Dwayne E. Culp, P.E., CFM Effective February 8, 2009, my contact information becomes: Dwayne E. Culp, P.E., CFM | JACOBS ENGINEERING GROUP : North American Infrastructure | Manager: Hydrology & Hydraulics Section | 5995 Rogerdale Road- B2047B | Houston, TX 77072 | 281-776-2109 | 832.351.7766 Fax |

Good call - I forgot to mention that. Caldera released an advisory a couple months ago about it if anyone's interested: ftp://ftp.calderasystems.com/pub/OpenLinux/security/CSSA-2000-008.0.txt Dave -----Original Message----- From: Thomas Biege [mailto:thomas@suse.de] Sent: Friday, May 19, 2000 2:44 AM To: David LaPorte Cc: Mike Bowie; linux-security@redhat.com Subject: Re: [Security -

Mapping stable-security to proposed-updates. Accepted: -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 1.8 Date: Sat, 31 Oct 2015 06:53:56 +0100 Source: xen Binary: libxen-4.4 libxenstore3.0 libxen-dev xenstore-utils xen-utils-common xen-utils-4.4 xen-hypervisor-4.4-amd64 xen-system-amd64 xen-hypervisor-4.4-arm64 xen-system-arm64 xen-hypervisor-4.4-armhf xen-system-armhf Architecture:

Accepted: -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 1.8 Date: Sat, 31 Oct 2015 06:53:56 +0100 Source: xen Binary: libxen-4.4 libxenstore3.0 libxen-dev xenstore-utils xen-utils-common xen-utils-4.4 xen-hypervisor-4.4-amd64 xen-system-amd64 xen-hypervisor-4.4-arm64 xen-system-arm64 xen-hypervisor-4.4-armhf xen-system-armhf Architecture: all source Version: 4.4.1-9+deb8u2

Hello everybody! For my academic project work I intend to use only open-source software. My objective is to carry out classification of satellite digital images using Geostatistics. I found out GRASS is a good software for image processing. Also a good geostatistics software is R. It is also known that R can be used in combination with GRASS. But I am not able to confirm that satellite digital

Dear Mike, You wrote: >With the 1.9.17p3 version, smbstatus didn't have a problem >with this. With the new version however, smbstatus seems to >be looking for the smb.conf file in the location specified at >compile time. I can issue the smbstatus command with the same -s >option I use to start smbd and nmbd, but this is very cumbersome. >Can anyone offer any suggestions

I tried linking smbwrapper.so directly into bash, but that only works for bash and not any of the subprocesses it runs. That is bash can cd into the /smb directory and I can do an echo * to list files. But if I run a system command (ls, emacs) they can't see the /smb directory because they aren't linked with smbwrapper.so. -----Original Message----- From: Dirk De Wachter

Dear developers, The HPUX 10.20 trusted system hack doesn't work yet as intended. I have adapted the auth-passwd.c file to make it work. Please find a context diff file attached to this file. This diff is against the latest OpenSSH 2.2.0p1 released Sept 2, 2000. Also on HPUX 10.20, xauth is not found at the standard location. Perhaps this standard location could be changed automagically

esteeming Coiled tubing units are so compact and have such great potential, the Mars Drilling Project is evaluating a coiled tubing unit to drill for water on Mars. fells disseverance SPRING, TX--(MARKET WIRE)-- Coil Tubing Technology, Inc. (CTBG) announces the delivery of the first group of 8 Rotating Tools to oil and gas well service companies operating in Mexico and Oklahoma. Designed for use