similar to: New user and Install Problems

Hello, When I run the 'smbclient -L apollo' command at the UNIX prompt a I get an error. I have gone as far as I can in this DIAGNOSIS.txt file. Does anyone have any thoughts on what may be causing my problem ? I have made my comments to the DIAGNOSIS.txt file via '---- davidw {comment}' so you can see what I've done to date. Also, I thought I'd pass on the output

Hi , I am using Mandrake 7.2 and trying to install samba to share my linux hard disk with Windows 98 ... Herewith my config and diagonstics : bigserver <------------> aclient runing : mandrake 7.2 Win98 Ip Addr.: 192.168.0.1 192.168.0.2 password encrypted activated activated - ping commands work fine on both ways, so my Tcp/ip

I have CentOS 4 running on an old (early model) p3 with 64 MB RAM. It is acting as a router and firewall for my LAN. CentOS is doing a really good job with Shorewall + DHCPd - on a 10 Mbps cable modem, I see ~ 9.7 Mbps of throughput even when numerous tcp streams to different LAN hosts are running. I would like to add a virtual interface to one of my LAN interfaces. My LAN interface

Hello Everyone, I am relatively new to linux and Samba and I am having some difficulties setting Samba up as a Primary Domain Controller. Ihave read the Pdf document called "Using Samba as a PDC" by developrWorks and I have read most of the Howto documents relating to Samba. When I try to connect to my samba server with Win98se I get the message "no Domain server was able to

Dear all, ___Setup: - several wINDOWS 2000 workstations on SP4 (reg-patches applied, they worked on 2.x-stable) - Samba PDC (CVS 3.0.0rc2) (machine accounts added aswell as users in unix & samba) - OpenLDAP (2.1.12) <-- (Not really relevant since I tried without ldap too, so no info about that from this point) - Linux <HOSTNAME> 2.4.19 #1 Fri Jun 13 15:22:09 UTC 2003 i686

Please tell me the obvious mistake I'm making here. (And yes, I well know about NAT and one-way audio problems in general.) I want to try the new T.38 passthrough stuff, downloaded it, built it, tested it with an SPA-2100 and can hear announcements fine but echo test shows no audio outbound (i.e. SPA to Asterisk). Registered the second SPA-2100 channel with an Asterisk 1.0.10 server in

I'm trying to config a Linux box to integrate into a windows network using pam_smb and samba. Ive set it up so that using pam_smb I can get the user to log onto the linux desktop with their NT id and password. The only problem is once the user is logged on they need to be able to access shared resources disk, printers etc... without the need to reauthenticate to the domain, i.e. use a cache

I wish to mount a Win95 share on my linux machine. I can use smbclient to get to the shared disk, using this format: smbclient //win95.machine/share <password> The win95.machine is listed in my /etc/hosts file. I've tried every permutation of the smbmount syntax that I've been able to find in the documentation, dejanews, or this mailing list. Perhaps I've missed some. I

when I try to do a: $smbclient '\\smdlinux\tmp' I get this result. Any ideas? load_client_codepage: filename /etc/codepages/codepage.850 does not exist. Added interface ip=10.10.19.1 bcast=10.10.19.255 nmask=255.255.255.0 Session request failed (0,0) with myname=SMDLINUX destname=10.10.19.1 Unspecified error 0x0 Your server software is being unfriendly Thanks in advance, Scott

Hello Everyone, I have installed samba-1.9.17p4 on a linux 2.0.29 box, but the server work correctly only as a client. Testparm runs ok, but when i try to list the shares available on my server, this is the output: Added interface ip = 195.32.68.131 bcast = 195.32.68.191 nmask = 255.255.255.192 Session request failed (0,0) with myname = DNS2 destname = DNS2 Unspecified error 0x0 Your server

Hi, I am relatively new to the samba-suite. We are useing samba for file-Service and printer-service since a while the files residing on Digital-UNIX (DUNIX) and QNX and also the printers. works fine and very stable. Due to a reconfiguration I am looking for connecting the printer (HP-LJ4M) to a WinNT-WS client. and if I try to print out of DUNIX via smbclient this WS tells me something about

We have been using samba since 1995 and have found it superb, Thanks to all. Recently I built Samba1.19.17alpha4 on a DECstation 5000 running Ultrix 4.4 and included -DFAST_SHARE_MODES This results in UIST>smbclient -L UIST Session request failed (0,0) with myname=UIST destname=UIST Unspecified error 0x0 Your server software is being unfriendly and ERROR

Hi all, I have two samba machines running v1.9.18p4. When I try and list the shares on the second machine (calvin) fromn the first machine (hobbes) I get this: Session request failed (131,129) with myname=HOBBES destname=CALVIN Not listening for calling name Try to connect as another name (instead of HOBBES) You may find the -n option useful for this Any idea what this is trying to tell me?

I thought I would return this email, it shows that the email is at the status of 'distrust'.. please respond or correct situation I use this all the time and don't want to run into any problems because of a breach of security. Thanks Dale -----Original Message----- From: samba@samba.anu.edu.au

Hello, I wanted to view a AIX box as a WinNT box, so I downloaded the file samba-1.9.17p3.aix-3.2.5.tar.gz to install samba on the unix machine (IBM RS6000). It runs AIX Version 3. My client machine runs WinNT 4.00.1381 (x86 Family 6 Model 1 Stepping6). Samba is now installed on /usr2/local/samba. There are some symbolic links on /usr/local/samba that point to the corresponding files in

Well, I've asked a couple times already but I will ask one more, since I still havent' managed to get any further. We have several sites. Each site has it's own network and domain. We are connected via a WAN. Is the best practice to have one WINS server for each site? Or is a single WINS server for the WAN the way to go? Right now I have a single WINS server for the WAN. I CAN NOT

You must create a output filter. Edit /etc/printcap and add your client printer like this: ... PC-PRINTER:\ :sd=/var/spool/lpd/PP01:\ :mx#0:\ :lp=/dev/null:\ :if=/var/spool/lpd/Filter/PP01:\ :sh: ... Adjust the printcap parameters as needed (spool directory, directory to find the filter script). Make sure the lpd can access the directory. Consult your manual. Now create the filter

Sorry for the long post but I know trying to decide on hardware often want to see details about what people are using. I have the following AS-2022G-URF machine running OpenGaryIndiana[1] that I am starting to use. I successfully transferred a deduped zpool with 1.x TB of files and 60 or so zfs filesystems using mbuffer from an old 134 system with 6 drives - it ran at about 50MB/s or

Hi. In WinXP I can setup the permission of a file so that a user can modify the file, but he can not delete the file. I wonder if this is posible in Linux + ACL patch + Samba 3.0 compilled with --with-acl? Many thanks Oliver -- Oliver Schulze L. <oliver@samera.com.py>

Hello Together Please i have here a little company with any exisiting internal DNS Server "BIND 9.11.5-P4-5.1-Debian (Extended Support Version) <id:998753c>" Today i compilled the release Samba 4.10.7 successfully on any new machine here..... i read on Samba org the following News. - Do not use the BIND9_FLATFILE DNS back end. It is not supported and will be removed