similar to: Printer errors

Anyone successfully using a HP 8000 DN or HP 5 Lsi (with JetDirect module and assigned IP) with samba? Subject says it all. If you're successfully doing this, what configs made it work? FAQs tell how to set up with a print server, but what if the printer itself is the server? Trust me, the HP doesn't know jack about port 139. Using samba 2.0.4 on Solaris 7 and NT 4.0 SP5 with

Hi, I need to install Telai2d, a simple engineering program.During the setup.exe there is a stage where we can choose the new "folder" to add in Program Groups (in Start Menu ); i have tried both the attempt to create a new voices and to using an already existing group but the answer is the same : "impossible to create Folder X' ;at this point i cannot do other that exit setup.

Hello: I have this situation: I can make calls internally, I can make inbound calls but I can't make outbound calls. Thanks in advance. These are my devices: * asterisk 11.8.1 = 192.168.1.22 * sipphone grandstream gxp2160 = 192.168.1.5 * gateway audiocodes mp-114 2fxs-2fxo = 192.168.1.4 port 1 (FXS) connected to an analog phone port 3 (FXO) connected to the PSTN These are my

Hey, I posted a few days ago about how the printer paper sizes are differ from the admin account when they are installed. People at my work are getting pissed at the moment and all they want to do is to be able to change the paper sizes themselves and not have it done at the server Is there a way to do it? I fluked it at one stage and had it working like that, I think I deleted the driver

OK, I have been wrestling with this for two weeks now, so somebody please help ! We have an existing Samba Print Server, running RedHat linux, kernel 2.2.19, that runs fine, but is a P133 with 64 mb ram. So we built a new PC, the slowest thing we could buy, a duron 1 ghz with 512 mb RAM. Old printer server is running Samba 2.2.5, new printer server is running samba 2.2.5, and Slackware 8.1,

Hello, we run samba 2.0.6 on Solaris2.6 and use it together with clearcase (version 3.2.1). Sometimes the checkout of files from a clearcase NT-client hangs and probably causes clearcase to destroy the viewstore. In the samba logfile of that client I found the following message: [2000/02/17 09:29:49, 0] smbd/nttrans.c:call_nt_transact_ioctl(2401) call_nt_transact_ioctl: Currently not

I have done one succesful driver for downloading to my windows 2000-client. When i try set another with "setdriver " I get a result as : SetPrinter call failed! The only differens between them is in the desritption-field flags:[0x800000] name:[\\localhost\HP4600] description:[\\localhost\HP4600,HP4600,H4600] comment:[H4600] flags:[0x800000]

I am able to see my printer as a share. Well better put, I see four representations of my printer: ascii, lp2, lp-mono, and raw. I tried the naive thing and just selected lp2 and added the cannon bjc 4000 driver for NT. This didn't work. I get an error report: %%[ Error: undefined; offending Command: K ]%% . . . a bunch of strings that I don't understand. This does not look like the

Hi I updated samba today to 3.0.5. Printing stopped working. The log says: [2004/08/02 14:28:57, 0] printing/print_cups.c:cups_printer_fn(108) Unable to connect to CUPS server localhost - Verbindungsaufbau abgelehnt I'm using lprng not cups. Is samba ignoring printing = lprng? I tested lpr it still works as usual. Is there anything else I should check? Thanks. Best, Hans

Hi, I've recently installed LPRng 3.6.22, ifhp 3.3.19, and Samba 2.0.7 on my FreeBSD 4.1 system. Printing works fine from the FreeBSD machine, and I am able to access shares via my Win2000 machine. I've configured a [printers] section in smb.conf, and I am able to see the LaserJet 2100 when browsing, but on installing it I am unable to print to it. I get en error connecting the printer

<It seems that the print command is trying to find the printer at location 'localhost'. Since this is a network printer it is not at localhost is it?> Yeah, the error messages made no sense to me either! Well, like I said earlier: < The IP address of this printer is 10.1.1.192. I call this printer nero, and have it listed in my /etc/hosts file> Here is a copy of part of my

Dear SAMBA Group, I've playing around with getting SAMBA to do things for me. I have an Ultra-1 running Solaris 2.6 and a Win-XP system with a Canon BJC-2000 printer attached to it. I'm trying to get the SUN to print to the printer on the XP box. I have followed various instructions but now when I print as "root" with "lp -d bjc <file>" I get an email message

We have a Redhat 7.2 server running(we think) samba 2.2. We updated 3 Win2K machines from SP2 to SP3 and now we have some problems. While they all can browse, read and write to samba shared directories, they cannot manipulate any open files in them. We do have one other Win2K machine that works with no problems but I cannot find any differences in its setup and the other three. I checked the

Robert Dal Santo wrote: > Is there any work underway to get Samba to support OPLOCKS? I know > they are difficult to implement but I'm faced with a decisions now to buy an > NT box (Ugh!) or do a lot of messing around to get this application > to perform decently. The application in questions takes around 5 > hours to do a taks without OPLOCKS and around an hour to do the

I am trying to send SMS from my grandstream GXV3240 Asterisk receives the message in a NOTIFY block. How can I get asterisk to run dialplan code when receiving these Notify SMS Message Blocks. I can then route them to my SMS provider. Any ideas are appreciated. Below is debug of a message sent from the phone when received no dialplan code is triggered. I am wounding if I need to

Hello, I am trying to setup a Grandstream GXP2160 IP-phone with secure calling (SRTP). Secure signaling SSIP for registration is working great ! I follow this guide : https://wiki.asterisk.org/wiki/display/AST/Secure+Calling+Tutorial But when I try to make a call with SRTP, I get stuck. There is an initial INVITE which is anwered with a 401. There should follow a new INVITE with a nonce,

Hiya, Can someone explain why I am seeing chmod of W32X86/3/PSCRIPT5.DLL failed (Operation not permitted) in the log files. It is a samba 3.0.1pre3 print server, which has the drivers on it for loading to the clients. Here is the log file of errors. Thanx in advanced Kris [2003/11/27 16:29:15, 2] smbd/open.c:open_file(250) aclarke opened file W32X86/3/PSCRIPT.HLP read=Yes write=No

On a server that has been running smoothly since it was setup, and with no changes to configurations or network or anything, users cannot save a shared QuickBooks file. they have been regularly using, updating and saving to this file for a few months. All users are able to create and update other files in the same share. I have not confirmed if they are able to create and update new QuickBooks

Hello, I just moved from SuSE 7.0 to SuSE 7.1 by reinstalling. I use HP 2100TN JetDirect printer. I use kernel-2.4.2, LPRng-3.6.26, ifhp-3.4.4, Samba-2.0.7 Printing from Linux server works just as before. Printing from Windows clients has problems. I set it up just like before but any print job from Windows takes its while and then spits out junk: -------------------------- ERROR: timeout

For some reason, our HP8150DN printers hang with this error and require power-cycling after a user tries to print any job from Windows2000 or NT (including a test page). The Samba server is running 2.2.5 on a Solaris 2.6 box using Sun's printing system. It forwards all jobs to another Solaris machine that runs LPRng-3.8.2 and ifhp-3.5.1. I am able to install and use all of our printers