similar to: setup problems

Up until yesterday I've had a lot of high pitched noise when connecting a BT101 to the PSTN via the X100P. I was using an Asus A7V133 with raid motherboard and an 850 AMD Duron. Over the weekend I thought I'd try another machine. I had an HP Vectra 400 Mhz PII MMX with 128 Mb RAM available, today no noise at all. Now I must see if the Vectra is up to the job. -- Dave Cotton

Thank you for your response! Here comes the smb.conf… André — smb.conf — # Global parameters [global] workgroup = LOPRODUCTS realm = LOPRODUCTS.LOCAL server role = member server security = ads server string = %h server (Samba, Ubuntu) netbios name = fireball disable netbios = yes wins support = no domain master = no local master = no preferred master = no os level = 0 dns forwarder

Hello List, I have used isolinux for years without problems. Recently I decided to upgrade from 3.09 to 3.11. Every CD I create can be read on my Vectra (Pentium 3) and all other Pentium 3 boxes, but all my Pentium 4 boxes will not boot (they ignore the CD and boot from hard disk). The bochs VM will boot the CDs fine just like the Pentium 3 machines. I have tried 3.09 (which worked

Hi, I came back from a quiet weekend today and found my E400P box to have gone astray. Asterisk is loaded from inittab, and started crashing and reloading a couple of thousands of times, each time notifying my monitoring service :-P I remember there would be issues on old cvs stuff since the crash at digium so I made a clean checkout just now. Here is what happens when I load manually:

Greetings! I have made great progress thanks to this group. My Asterisk seems to be working for the most part. I am using the following equipment/software: * HP Vectra VL - Pentium Pro CPU - 256MB RAM * Redhat Linux 8 - Loaded straight from distro CDs as Developer Workstation - latest updates from RHN * Asterisk (latest as of two weeks ago when I used CVS checkout) * X-Lite SIP Client on a

Dear All, have a general question about coefficients estimation of the mixed model. I simulated a very basic model: Y|b=X*\beta+Z*b +\sigma^2* diag(ni); b follows N(0,\psi) #i.e. bivariate normal where b is the latent variable, Z and X are ni*2 design matrices, sigma is the error variance, Y are longitudinal data, i.e. there are ni

Hi all, I just installed R-1.9.0 on Windows 2000 from binaries. Yesterday, on R-1.8.1 I ran a script that looked like: library(lattice) tmp <- expand.grid(A = 1:3, B = letters[1:2]) tmp$z <- runif(NROW(tmp)) trellis.device(png, file = "x1081.png", theme = col.whitebg) xyplot(z ~ A | B, data = tmp, panel = function(x, y, i) { panel.xyplot(x, y)

I have a general question about coefficients estimation of the mixed model. I simulated a very basic model: Y|b=X*\beta+Z*b +\sigma^2* diag(ni); b follows N(0,\psi) #i.e. bivariate normal where b is the latent variable, Z and X are ni*2 design matrices, sigma is the error variance, Y are longitudinal data, i.e. there are ni

Previously I mentioned some problems I was having getting LiveIce and Icecast working. Everything is working so I wanted to get the archives updated with the solutions. The first was just my player I was streaming to needed a much larger buffer configured (stupid, but I'm just starting up with streaming). The problem I had with LiveIce streams being unlistenable was due to the wrong input

Hi, I have had samba 3.0 running on my FreeBSD 5.2 sparc64 system for a few weeks without any issues. Recently I had to reboot, and now nmbd won't run. I have NOT changed my config one bit. I have verified nothing is bound to port 137 via netstat -an . The error is as follows: [2004/03/19 05:20:10, 0] lib/util_sock.c:open_socket_in(646) bind failed on port 137 socket_addr =

Hi guys, sorry to be iterating this on the list once more, but I'm not able to get this stuff to work as I'd expect. So far, I've always managed to keep it out of NAT environments :-> My home LAN is NATed by a simple Draytek router. In the home LAN is an ATA186 with SIP. On the internet (public) is an Asterisk server. I have nat=yes in the sip.conf and the connectmode is set

Hi folks Seems really simple but run out of ideas: 1. Used Redhat 9 Packages for Asterisk 2. Zaptel one didn't work so recompiled zaptel from cvs against my kernel 2.4.20-8 3. Compile is fine no depmod problems/ugly message etc. 4. lsmod: wcusb 20064 0 (unused) wcfxo 9376 0 zaptel 179168 0 [wcusb wcfxo] 5. start up messages on

Hi Experts, I am running very basic setup ubuntu 5.04 on HP e-Vectra eth0 talking to SpeedTouch Home ppp0 is PPPOE through eth0 eth1 though USB-ETH is my local network I can ping firewall (192.168.2.254) from local I can ping ISP receiving point from firewall (then this idiots block ICMP!) I cannot ping ISP from local. No packets go out - I checked with ethereal Thanks in advance Alex

I'm trying to compile in DFS with the --with-dfs option. There is an #ifdef WITH_DFS and following that, is some header files that are referenced that I can't seem to find any where. Is this a bug, or is this because my operating system doesn't have these files? I'm running OpenBSD 3.4. Here is the first portion of config.status: #! /bin/sh # Generated automatically by

Hello, I am having some difficulty in getting Samba v.1.9.18p10 to authenticate using server security. I have couple of users that do not have unix accounts and those are the users that can not connect to the samba server. The message that I get in the logfile is server rejected the session. I have no problem login in to the server, but I also have a account on the unix server. Server

Hi, I'm from Malaysia and sorry about this unconvenient mail.Actually I want to ask you a few question regarding the SAMBA setup/configuration,I'm still new to linux but can operate it.Here is my networking situation: PC 1 Computer name : Vectra VL400 IP address : 192.168.0.1 O/S : Windows 98 SE PC 2 Computer name : Gigabyte 440BX IP address : 192.168.0.2 O/S : Red Hat linux 6.1

Hi, Thanks a lot for your exceptional work.... I guess many people dealing with bootable CD's just could'nt do anything without isolinux... However I've got a small problem. In fact the problem is maybe due to my BIOS (Phoenix on an HP Vectra VL800), and maybe due to isolinux / memdisk, I don't know. Generally speaking, take any floppy, format it under Win2K, copy from your hard

I have a Centos server and I want to only accept mail for the local users from 3 mail servers, but I still want the users to be able to send emails through this server, If I firewall the SMTP port to my 3 mail servers is there any way users will be able to still send via the main POP server ? (currently using Sendmails SMTP-Auth) Thanks Denis

I am quite new to Linux and have moved (almost) from a windoze NT4 environment. My present configuration is running SuSE V 8.0 with KDE3.0.5 desktop on two machines, connecting with Samba to an NT4 PC, and an occasional laptop or other PC that connects locally to the network. After a deal of searching, researching, and seeking advice I have decided to use Shorewall as my firewall.

hello all! After having read http://www.xiph.org/ogg/vorbis/listen.html and listened to the examples on that very educational page, I decided to augment the info. This example is more simple, it involves the comparision between two streams of the same radio station, FranceInter (a station of Radio France in Paris). The ogg stream is running at around 30 kbps/11 kHz in stereo. The WMA stream