similar to: WINS & IP-Masquerade

Okay here is my setup: Gentoo Box running 2.6.4 w/ 4 NICs 1 NIC is for internal network 3 NICs are for external network The machine has a static address assigned to the internal network nic. This nic runs dhcp and dns forwarding. The other 3 nics have external dynamic IP addresses. All will have the same gateway. There are 3 NICs because this is a very large pipe, that will only allocate a

Hi everyone! I have a little problem here. First let explain my network topology I have a 192.168.0.0/24 network, with win98 workstations, a NT serving domain and another NT as a WINS server. 192.168.0.3 - NT / WINS 192.168.0.6 - NT / DOMAIN 192.168.0.1 - Internet gateway 192.168.0.2 - Wireless AP 200 that connects to a linux gw ==--==-=-=-==-= AIR :) -- --- == --==--=-- =-=- 192.168.0.4 -

Dear all, I''ve the following problem with routing + NAT: If I''ve two ISP and I''m using two nexthop in default route with MASQUERADE on both ISP links, I see routing cache regenerated, but sometimes packets sent to a new link (after cache regeneration) uses wrong source address for masquerading. Here is the config. I''ve two links to outside via two

Package: xen-utils-common Version: 3.0.3-0-2 Severity: normal I'm not an expert in networking but I think that the current setup when using network-nat for domains is insecure. I've configured : (network-script 'network-nat netdev=eth1') (vif-script vif-nat) So when only domain 0 is started, I get the following : # iptables -L -n Chain INPUT (policy ACCEPT) target prot

https://bugzilla.netfilter.org/cgi-bin/bugzilla/show_bug.cgi?id=64 Summary: Conntrack-Table is not cleared on inferface down using target MASQUERADE Product: netfilter/iptables Version: linux-2.4.x Platform: i386 OS/Version: other Status: NEW Severity: normal Priority: P2 Component: NAT

Hello, I''ve successfully gotten Shorewall 2.0.7 configured and working. However, I am confused about how I can setup the interface "ppp1" in the file masq to allow the masquerading of my local LAN over a L2TP tunnel. It works without a hitch if the ppp interface is up, but if I reboot my machine without the interface being, shorewall refuses to load because the interface is

Dear list members, Masquerading does''not work for me. This is a Mandrake Linux 10 system, but I use another kernel, that included in the original distribution (original: 2.6.3, now used 2.6.8 because of a lot of suck with OpenSwan with kernels prior 2.6.4). The problem seems to be similar or identical mentioned here:

Hello guys I don''t know if this thing has been posted before (if it was , please forgive me). I have 7 computers at home and I want all of them to have access to the internet. In order to do that , I set up a linux router (2 network cards) as a usual router (eth0 : 82.77.69.75 - internet connection ; eth1 : 192.168.10.1 - local network) . The other computers have ips ranging from

https://bugzilla.netfilter.org/show_bug.cgi?id=958 Summary: MASQUERADE does not work on recent kernels Product: netfilter/iptables Version: unspecified Platform: x86_64 OS/Version: All Status: NEW Severity: major Priority: P5 Component: NAT AssignedTo: netfilter-buglog at lists.netfilter.org

----- Message d'origine ---- > De : Dr.Drej <wineforum-user at winehq.org> > ? : wine-users at winehq.org > Envoy? le : Dimanche, 9 Mars 2008, 12h05mn 50s > Objet : [Wine] Vampire The Masquerade - Bloodlines > > Hi, > > I installed Vampire: The Masquerade - Bloodlines under Wine on Ubuntu Gutsy and > so far it was working fine. But now I ran across a

Hi, I have a linux-box with 3 eth, 2 of us go into 2 ISP. My localnet is masquerade with this rule: Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination SNAT all -- 10.0.0.0/16 anywhere to:211.56.233.186 SNAT all --

https://bugzilla.netfilter.org/bugzilla/show_bug.cgi?id=486 Summary: Invalid Argument in MASQUERADE Product: netfilter/iptables Version: linux-2.6.x Platform: i386 OS/Version: other Status: NEW Severity: normal Priority: P2 Component: NAT AssignedTo: laforge@netfilter.org ReportedBy:

https://bugzilla.netfilter.org/show_bug.cgi?id=1343 Bug ID: 1343 Summary: With iPv6 masquerade, ICMPv6 time-exceeded pkts are forwarded with bad checksum Product: netfilter/iptables Version: unspecified Hardware: x86_64 OS: Debian GNU/Linux Status: NEW Severity: normal

Hi all, I'm currently in the process of building a 2-Node libvirt/KVM Cluster and ran into some issues regarding the network connectivity of our virtual machines. Our setup seemed to work fine, we were able to browse to Google and our own company website and some others from within the VM. Then we tried microsoft.com to download some Windows iso images from MS Partner Network. The page

https://bugzilla.netfilter.org/show_bug.cgi?id=1105 Bug ID: 1105 Summary: masquerade fully broken when no prerouting chain is created Product: nftables Version: unspecified Hardware: x86_64 OS: other Status: NEW Severity: major Priority: P5 Component: kernel

Hi I have using a Bering (LRP) box with shorewall, and I must enable IP masquedare only a few hosts on my network. I want to enable only masquerade from 192.168.0.2 to 192.168.0.25. What I must do ? I known that I have to configure the /etc/shorewall/masq file, but I don''t known how. Thanks in advance.

Hi, I installed Vampire: The Masquerade - Bloodlines under Wine on Ubuntu Gutsy and so far it was working fine. But now I ran across a problem which I then also found in the AppDB: Surveillance-room in bloodbank calls forth major performance-issues due to blitting surface. (fixme:d3d_surface:fb_copy_to_texture_direct Doing a pixel by pixel copy from the framebuffer to a texture, expect major

I have a server that is also a firewall router at a public library with a fiber optic Internet connection. It is running kernel 2.6.32-642.4.2.el6.x86_64 (current CentOS 6.8) and Iptables 1.4.7 (current stock CentOS 6.8). I having trouble with Internet throughput. I am supposed to be getting 20Mbits down and 20MBits up, but I am not getting that. It has no problem doing 20MBits down, but for

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi!, ok here is my question, I have 2 ISP''s connected to the firewall, and I already set up th routing tables, I have a 256k and a 1.5m connection, and I want a couple pcs from the internal network to masquerade through the 256k connection and the rest through the 1.5m connection, how do I setup this on shorewall??? I am not subscribed to the

Hi all, I have read and done the LARTC HOW-to and almost everything work''s execpt from the inside network. When load balancing over the two access it only work on the linux router/nat machine 1) I am running stock mandrake kernel 2.6.8.1-12mdk and using stock shorewall config 2.0.8 2) I have two internet link and two internals link. Load balance setup work for the linux router/nat