similar to: rsync is fantastic except for one usual feature we want from it .. please help ?

I've got IAX2 setup between two servers with this config: I have two servers on a switch: asteriskm is 192.168.0.160 and asterisk1 is 192.168.0.161 asteriskm has a Sangoma T1 card in it. I want to route calls from asteriskm to asterisk1 which will run an AGI IVR for the call. Config is below, but my problem is that 90-95% of the time when I start asterisk on the two servers I get the

When attempting to join my domain, the NT 4 Workstation and XP Pro clients cannot contact the domain controller. The Samba server is running normally, and can be connected to via IP address, but not by name. Additionally, when I set up a DNS, it still could not contact the Samba server. The clients and server are on the same subnet. I have read as much as I could find on configuring Samba as a

Hi all: I am pretty new to xen, but ,thanks to you, I am learning fast :) I have a Dell Poweredge 2950 server running Debian Lenny as Dom0 named Asgard I have configured three DomU (Loki, Hermod and Thor) with DHCP support. All the machines (Dom0 and DomU''s) ask for an IP address to a DHCP server in the Office LAN. The DHCP server is configured to bind certain IP addresses to the Dom0

Hi! I am currently using Sweave for writing my bachelor thesis - and I have a problem: I am using a LaTeX style (report) with quite big margin spaces. The Sweave generated LaTeX code "floats" into the margin - and it looks ugly. The text is blocked and fine... then there comes some flattering code running over the margin... and blocked text again. Considering the LaTeX output, I guess

Dear admin, I am working in St George Bank, Australia. I have installed Openssh 4.0p1 and 4.5p1 on our Sun Solaris 8 unix servers. We experience some bug when we launch a window on PC using ReflectionX by method Openssh to any of our Solaris 8 servers, there is no update login and logout information about users on /var/adm/wtmpx. Simply said when we using Reflection X to login a Solaris 8 server

I am runninng rsync on Ubuntu. It was installed using apt-get install rysnc. I note that the package has not yet been updated to rysnc 3.0. I would like to update using the tar but I am confused how to update the existing installation. On this machine, I am mainly using rsync to send to a cwrsync server (which I have updated already). Can I just overwrite the rsync executable? Any help

Hello, Can someone point me to documentation on how to best backup a samba member server? I see the wiki currently does not contain one. Is it as simple as backup all shared folders with rysnc or similar that will preserve ACLS along with the smb.conf? I'm currently relying on a raid solution. Thanks. -- -James

Hi, I am a newbie to Rysnc and a had a quick question, the answer for which I wasn't able to find in the documentations. Currently I have Solaris system A which has files that are being generated and changed in real time. I am running rysnc in daemon mode on A.(server) On system B I use the appropriate rysnc command to connect to system A and sync all the files on B. I am having

Is it possible to configure rsync in server mode, to gain access to root protected files, without the user having to log in as root through ssh? I'd prefer to login as a regular user through ssh and access an rysnc server on the host that's running as root. As far as I can tell, however, that's not possible...am I wrong?

I have setup a Rysnc server in Mandrake 9.1 When I add a auth user into my Rsync.conf and rsync.secrets, it do not work, everytime it shows [root@html]# rsync chris@mandrake82::XXXXX/.html/. / Password: @ERROR: auth failed on module XXXXX rsync: connection unexpectedly closed (89 bytes read so far) rsync error: error in rsync protocol data stream (code 12) at io.c(165) This is my rsync's

Hi I am making an extraordinary claim: rysnc seems to copy all my files, not just ones that have changed or new files. rsync version 2.6.0 protocol version 27 Debian 3.0 Woody I have tested this with one simple file, my example is shown below. Does anyone have any suggestions to rectify this? Regards Gareth example: I create a file called 'testfile' in /tmp/play containing the

Hello everyone, I'm new to this mailing list but I have been using rsync for some years up to now. I'm trying to synchronize two directory trees, but I want a special behavior that I didn't find on the net nor in the manual (or maybe there is a combination of options to get what I want but I couldn't find it). Tree A is like: A * * FolderA * * And tree B (on a remote

We are using rsync to mirror around 10 of our websites from dedicated server A to dedicated server B runing RHEL 3.0 and rysnc v2.6.3pre1 in a daemon mode. I am using the following crontab script command on dedicated server A: /usr/local/bin/rsync -avz -e "ssh -i /home/users/admin/publicKey-for-server-B" /home/serverA/site3 serverB::home/mirror Dedicated server B (where the

Besides, obviously, the potential shared data on file servers, can't you just use the script that is introduced for backing up DCs? At least if the complete Samba installation is in "/usr/local/samba"... https://wiki.samba.org/index.php/Backup_and_restore_an_Samba_AD_DC Am 02.12.2015 um 20:06 schrieb Marc Muehlfeld: > Hello James, > > Am 02.12.2015 um 15:57 schrieb

Hello! Any idea? Em 11-06-2016 16:13, Carlos A. P. Cunha escreveu: > > Hello! > > Any idea? > > > Em 10-06-2016 14:29, Carlos A. P. Cunha escreveu: >> Hello! >> >> I have two Dcs Samba 4 version 4.4.0, the DC 2 received rsync to DC >> 1, ok this SYSVOL, but necessary execute "samba-tool ntacl sysvol >> reset", for correct ids, but

Hello, I search a way to continue processing backup event i/o errors occured on the remote server. I use rsync to make backup of files on a files-server. Recently I had a corrupted file on the files-server and rysnc crash, and don't continue to backup the rest of files. I have found the --ignore-errors rsync option but it seems only about deleting action. On backup server I use this

Im brand new to rsync and i been doing alot of reading about it and it looks like the tool I have long been wanting. Bascially i got 1 server, 2 hard drives. partions are / /boot /home /usr /var /backup (2nd drive) Bascially what i am looking at doing is mirroring the first drive to the 2nd drive, and once that intial one is moved over, have a cron run nightly (or when specified) that will

I'm feeling really stupid here.... I seem to be missing something about the syslinux config file. I'm booting a workstation via pxelinux. Everything is cool, life is great, but I seem to be missing something about the config file. I have: display menu.dpy timeout 35000 default netboot label netboot kernel vmlinuz.nfs append root=/dev/nfs nfsroot=10.1.1.4:/home/image/1

I've just gotten pxelinux working (very cool) to boot a Dell PowerEdge. Everything is great, except for one bit. I turned on the IPAPPEND option, and when the machine boots (configured for nfs-root, IP kernel-level autoconf with no options) it says: "ip-config: incomplete network configuration information". According to the syslinux.doc file, the ipappend option appends a line to

I've been struggling with this for a while, and though it worked for about five minutes Sunday night, it's been a no-go ever since I built my server last summer. What I've got: Samba (samba): OpenBSD 4.2-STABLE, samba-3.0.25b (from packages) Laptop (osiris): WinXP SP2 Desktop (isis): WinXP x64 SP2 I can copy/move anything and everything between samba and laptop. I can