similar to: hello Linus...

I started the massive transfer based on the historical timings, but now I am facing lots of problems in the transfer...I am getting lot of errors like this.. This is a very critical production update I have only 3 weeks time to complete this 4 tb transfer that was taken from historical times using rsync rsync: writefd_unbuffered failed to write 4813 bytes: phase "unknown" [sender]:

I need to rsync 4 TB datafiles to remote server and clone to a new oracle database..I have about 40 drives that contains this 4 TB data. I would like to do rsync from a directory level by using --files-from=FILE option. But the problem is what will happen if the network connection fails the whole rsync will fail right. rsync -a srchost:/ / --files-from=dbf-list and dbf-list would contain this:

We used rsync 2.6.3 on a couple of Solaris 8 machines to update an Oracle database from one machine to another. Here is the procedure I used: The source database was up and running so this operation was similar to doing a hot backup. I queried the source database for a list of tablespace names, and for each tablespace, I queried the list of datafiles. I put the tablespace in hot backup mode,

Oh yeah - easy way to check, Randy: Next time your node hangs, get on the OTHER NODE and go into each directory where files are being opened (datafiles, archivelogs, controlefiles, redo logs, etc) and delete a file (you can create one first then delete it). If this causes the hung node to recover then you're having the same problem I was having. Jeremy >>> "Jeremy

Howdy, I am trying to setup a 10gR2 RAC on top of some nbd devices. OS is Centos4.1/i386, (2.6.9-11.0.0.10.3.EL, ocfs2-2.6.9-11.0.0.10.3.EL-1.0.4-1). ocfs2 setup went perfectly well, btw. (besides the fact that ocfs2console apparently ignores nbd disks) mount says /dev/nbd1 on /opt/oradata/data1 type ocfs2 (rw,_netdev) on both nodes ls says (after runInstaller was started, so the files were

Hello, I was reading your posts about RSYNC. We have a massive Oracle schema lots of datafiles about 750 GB size. We do rsync datafiles from source to target server but everytime we cleanup the datafiles on the target server and do rsync every 2 weeks. On the target side mostly the datafiles will be same but on source we might have added few datafiles or made some changes in data and as such the

We are using RHEL ES 3.0 Update 6, kernel version is 2.4.21-37.ELsmp. We have 5-node Oracle 10g RAC (10.1.0.4). # cat /proc/ocfs/version 1.0.14-PROD1 Fri Jan 7 13:58:41 PST 2005 (build 7a10bc19875bb2abf8a7fd110639b81b) One problem with ocfs v1 here is that when I used "debugocfs -h /dev/emcpowere1" command, it always show that "curr_master=INVALID_MASTER". My question is: Is

For the 2nd problem, on node 5, I tried the following: $ rmdir hotbackup rmdir: `hotbackup': Directory not empty $ ls -ldi hotbackup/ 266133504 drwxr-xr-x 1 oracle dba 131072 Dec 14 15:46 hotbackup/ Now this folder is back! Strange! > -----Original Message----- > From: Wu, Hai > Sent: Wednesday, December 14, 2005 5:47 PM > To: 'ocfs-users@oss.oracle.com'

I am trying to use: ocfs-support-1.0.10-1 ocfs-2.4.21-EL-smp-1.0.11-1 ocfs-tools-1.0.10-1 with RedHat AS 3.0, 2-node cluster with shared SCSI. 2 dell 1650s, dual CPUs, PERC 3/DC cards chained to a PowerVault 220S. I am using lvm, and here is my layout: [root@cluster1 archive]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda2 32G 5.1G 25G

Running ocfs v 1.0.9-PROD12 on RHAS 2.1, kernel 2.4.9-e.25smp. I have (what look to ls and rm) as empty directories. But when I try to rmdir, returns "Directory not empty". This has gone through a reboot (several actually). Any ideas what I can do? [root@delphi1 tmp]# ls -l /oradata/u02 total 514 drwxr-xr-x 1 oracle dba 131072 Feb 4 2003 bogus drwxr-xr-x 1 oracle

we started using an ocfs file system about 4 months ago as the shared archived redo destination for the 4-node rac instances (HP dl380, msa1000, RH AS 2.1) . last night we are seeing some weird behavior, and my guess is the inode directory in the file system is getting corrupted. I've always had a bad feeling about OCFS not being very robust at handling constant file creation and deletion

Greetings, Having read about the previous OSFS hangs, I think this one that we are seeing is different, but I'm not sure if this is caused by OCFS or the Linux OS. We are running OCFS Version 1.09 with Linux AS 3.0/9i RAC. We have a 2 node Intel Cluster (Node 1 and Node 2). This morning the DBA tried to do an "ls" command on /u06/oradata/database

Hello ocfs2 experts, OS is RHEL 2.6.9-78.0.13.ELsmp x86 With OCFS2 1.2.9 RDBMS/Clusterware s/w 10.2.0.1 Hoping someone can help me resolve the following error when running cluvfy to check ocfs2-shared storage. Have validated that the devices were correctly mounted and cross-referenced with another 2-node RAC environment we have where we'd successfully run cluvfy on prior to installing

I am installing Oracle Clusterware 10.2.0.1 on Linux 4.5 ES on OCFS2 and ASM. my ocr and oss files are on ocfs2. I got following error while running it. Please let me know what went wrong. -------------------------------------------------------------------------------------------------------------------- [root@linux2 crs]# ./root.sh WARNING: directory '/u01/app/oracle/product' is not

Ok guys & gals here is the scenario: 1.) Host RHEL 4 U3 2.6.9-34.0.2.EL 2.) OCFS2 latest version 3.) Successfully formatted & mounted OCFS2 filesystems on 2 nodes /dev/sdb1 /u02/oradata/usdev/voting /dev/sdc1 /u02/oradata/usdev/data01 /dev/sdd1 /u02/oradata/usdev/data02 /dev/sde1 /u02/oradata/usdev/data03 4.) Downloaded & installed ASMLib 2.0 on both nodes 5.) Ran

I looked in the release notes, but maybe I missed it. Is it not possible to build a kernel from CentOS 4.3 (using 2.6.9-34.0.1) with HIGHMEM support turned off? This is for a machine with 512mb. When I try to build the kernel, I get _etext undefined symbol on line 100 of pageattr.c in arch/i386/mm. Linus

Had a problem starting Oracle after expanding an EMC Metalun. We get the following errors: >WARNING: OemInit2: Opened file(/oradata/dbf/quorum.dbf 8), tid = main:1024 file = oem.c, line = 491 {Sun Apr 17 10:33:41 2005 } >ERROR: ReadOthersDskInfo(): ReadFile(/oradata/dbf/quorum.dbf) failed(5) - (0) bytes read, tid = main:1024 file = oem.c, line = 1396 {Sun Apr 17 10:33:41 2005 }

Hi. Using ZFS-FUSE. $SUBJECT happened 3 out of 5 times while testing, just wanna know if someone has seen such scenario before. Steps: ------------------------------------------------------------ root at localhost:/# uname -a Linux localhost 2.6.24-24-generic #1 SMP Wed Apr 15 15:54:25 UTC 2009 i686 GNU/Linux root at localhost:/# zpool upgrade -v This system is currently running ZFS pool

Hi, I am trying to install Oracle 9i RAC on SLES 8 SP3 with a shared firewire disk. I am using the following OCFS: OCFS Release 1.0.11-1 for suse sp3 2.4.21-138 smp kernel ocfs-2.4.21-138-smp-1.0.11-1.i586.rpm ocfs-tools-1.0.10-1.i386.rpm ocfs-support-1.0.10-1.i386.rpm 1/ I have configured OCFS and a shared file system /opt/oracle/oradata 2/ I have created a raw device for use as quorum

I currenlty have the setup below, both nodes can see the shared drive ( confirmed with fdisk -l ) However I am unable to mount the shared device from node (2) after I mounted from node(1) I get the follwoign error mount.ocfs2: Transport endpoint is not connected while mounting /dev/sdb1 on /u02/oradata/orcl OS Red Hat uname -r --------------------------------- 2.6.9-22.ELsmp OCFS version