similar to: which is faster and less bandwith

Hello all, I´ve read http://lartc.org/howto/ and now i am just confused, i think my skills with linux are not very good, so asking for help. I have a linux box with two ethernets cards eth0(gateway 1mb) with is the host for some sites and emails and eth1(nat interface) with provide internet acess to other 5 pcs. I would like to limit the bandwith 512 k for the eth0 and 512 k for eth1 however

I have clients, which connectin to Internet through vpn. I want to dynamically share bandwith between vpn connections, so if there few connections, then they get all bandwith, if more then they get their minimal guaranteed bandwith. my idea is: ip-up.local: tc class add dev $DEV parent 1:1 classid 1:2${1/ppp/} htb rate $[$RATEUP/$VPNS]kbit ceil ${RATEUP}kbps tc filter add dev $DEV protocol ip

I would like to know how to calculate the amount of bandwith I would need to host X number of calls. For example, if user A in San Francisco with an ATA 186 calls user B in New York with an ATA 186 and Asterisk is being hosted in a PC in Miami. How much bandwith do I need to have in Miami? Do I just need bandwith for the setup of the call (ie the SIP part) or are there any instances where the

Hi, If I have a DSL router with 300kpbs upload bandwith: Linux(eth0) ---(100Mbps)---> DSL ---(300kbps)---> INTERNET Which is the recomended value I must set in my QoS setup for the maximum outbound bandwith of my ethernet interface ? The max of 300kbps or something less like 290kbps ? Especify less than the maximum available bandwith is advisable to ensure that the QoS algoritms goes

768 download and 512 upload. Now my question is I just can have 32 user listen my radio??? <p>>From: "Enrico Minack" <enrico.minack@informatik.tu-chemnitz.de> >Reply-To: icecast@xiph.org >To: <icecast@xiph.org> >Subject: Re: [icecast] How calculate bandwith - How listeners >Date: Thu, 27 May 2004 22:03:38 +0200 > > > I have two lines ADSL

Hello, I''m Alexandra Well, i have been working with cbq around 3 month ago without any problems, what i do is control the bandwith to 64Kbit for input and output and it works well. But now I don''t want control the Bandwith, i only need prioritize udp trafic over tcp trafic Can somebody to help me with my requirement? Thanks Alexandra

Dear members, I am trying to share the bandwith for all users fairly. because some users heavily uses p2p programs and a few hosts consume most of bandwith. when we limit each flow it does not work as one client has many connection at same time. Firstly I tried to write a script that use the ipfm(which accounts traffic usage) logs as follow .extract ip addresses heavy bandwith users from

I am looking into supporting around 20 SIP clients (ATAs, IP softphones, etc) distributed in around 10 different end points (in South America). For the most part they all have narrow band connections 64kpbs, 128 at most and I?d like to use g729 all around (don?t have too many alternatives) To start with, I will have one * with no gateway to the PSTN and eventually a few * boxes with termination

Hi everybody. I have a dilema and I think you guys can help me out. I am trying to shape the bandwith for about 500 clients, and I want the bandwith to be alocated dynamicly. Lets say I have 4 MB bandwith. I give each ip (500 IP''s) a sustained rate of 4 KB/sec . I wonder if I can shape the bandwith so when for example only 100 clients are online, to give them a rate of 4MB/100. How can

hi,Stef: I read your burst test,I have some questions remain. A and B have immovability bandwith: If I bound bandwith to machine A and B,in order to it have 4Mbps,the other machine B have 6Mbps,(I have 10Mbps total). between them no permit bend from each other. whether burst cburst tokens ctokens value is zero. it''s right? --------------------------------- Do You Yahoo!?

is possible to setup any bandwith resource control in a ppp0 interface? i''d like to distribute bandwith equally between pcs in a network, and inside each pc, equally between protocols... is this possible? all the documentation refers to eth0 type interfaces... so? -- $~ who | grep -i brunette | date ; cd ~ ; unzip ; touch; strip; finger; mount; gasp; yes; uptime ; umount; sleep Diego

Hi everybody I have 2 asterisk server connected by iax trunk using gsm over a 64Kbps Frame relay circuit, my questions are:whats is bandwith of each call?, and how to limit this on asterisk? Thanks.. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070926/14236127/attachment.htm

Hi! I am newbie using broadcast for internet. I have two lines ADSL 768Kbps each one. Each line has connected a server doing stremaing with icecast. Somebody tell me that my bandwith is so low for much listeners. He told me that max people listen my radio station is 32 :( I wanna know how if it is true. I have a project to build my own radio station using my lines but this way it is imposible.

Hi, i''ve following problem. One of our gateway router, which connects some of our customers should have bandwith limit. So customer A with IP XX should have 2 Mbit, customer B with IP YY should have 10 Mbit. There is no need of borrowing bandwith so no fairness needed. My simple question: with which technique should I manage this shaping? Or is there any existing project which

Hi, I''m configured a home router with Shorewall. It took me a while as I''m quite a newbie to Linux, but now it''s working fine. I would like to install some bandwith-monitoring so I know how much traffic is generated. I found a tool for it called ipac-ng. It uses iptables and here is where I''m in trouble. I afraid that it will conflict with shorewall. Does

Hello, response time: how is it possible to increase the response time on Tinc VPNs. When I use tinc over a fast or giga-bit network connection the ping-response time is normally about 1800 to 2000 ms. Sometimes I get ping response times at about 2.500 to 3.000 ms over a normal Ethernet Connection or a television-cable connection within the same providers-network in the same city. The ping-time

Hi there, I am quite new to lartc and the usage of tc commands is still very difficult for me. All examples I have read (including the lartc.pdf) are way too complex for my "simple" problem. I just need to hard limit a given interface to a bandwith (egress and ingress) like: eth0 inbound 1000kbit eth0 outbound 1000kbit No priorities, just a bandwidth limitation per device.

Hello, I am running linux red hat 7.2 and still somewhat unfamiliar to its commands. I am administrator to an ISP with about 80 clients and would like to regulate the speed of uploads and downloads. I understand that I need to place everybody in different class''. Could I get help how to use tc/QBC to limit bandwith and impliment a u32 (or fwmark) filter that names mac

Server : eth0 - internet DSL eth1 - LAN wlan0 - wireles LAN I want server to share bandwith from eth0 evenly for users on eth1 and wlan0. How can i make it ? Is it possible ? As far as i know htb splits outgoing bandwith on one device only. ---------------------------------------------------- Grypa? Damy radę! Sprawdź jak jej zapowbiegać, a jeśli już za późno ...jak leczyć - grypa.wp.pl

Hi,All I am using iproute2 to manage bandwith for ADSL router.High,medium,low priority are needed for different protocol port on the ADSL's upstream side,as following: LAN --- |ADSL Router|------WAN When there aren't traffic on the specific priority, its bandwidth should be borrowed by other priorities.But it doesn't work.Here is my script: /usr/sbin/tc qdisc del dev nas0 root