similar to: Rsync 2.5.6 - Configure problem on HP-UX 11.i

I am running rsync ver 2.5.5 on HP-UX 11.0. Whenever I run an rsync specifying the "o" or "g" option to maintain owner or group info, I get an error similar to the one below. The actual error code changes every time, but it's always the same main.c line number. The error message does not occur if I remove the o and g options. rsync error: unexplained error (code 184) at

On 6 Aug 2001, Albert Chin-A-Young <china@thewrittenword.com> wrote: > On Mon, Aug 06, 2001 at 10:30:50PM +1000, Martin Pool wrote: > > Albert, I'd be interested to hear your comments on these, if you have > > time. > > AC_CHECK_TYPE([socklen_t], [int]) is not robust enough. I had a feeling it was too simple to be correct.. :) > Are you familiar with an ftp

Hi, Trying to compile rsync 2.5.0 for RedHat linux 7.1 alpha but I get compile errors. :-( Any ideas would be greatly appreciated! # uname -a Linux myhost 2.4.9-12 #1 Tue Oct 30 18:12:52 EST 2001 alpha unknown # cat /etc/redhat-release Red Hat Linux release 7.1 (Seawolf) # ./configure --prefix=/usr/local/rsync-2.5.0 configure: Configuring rsync 2.5.0 checking build system type...

I get the following errors when building the torture suite under HP-UX 11i with HP AnsiC. They are actually somewhat similar to the errors that I get trying to build the whole package with gcc: Compiling torture/torture.c In file included from include/includes.h:109, from torture/torture.c:23: /usr/include/sys/socket.h:484: error: parse error before "sendfile"

On 8 Aug 2001, "MCCALL,DON (HP-USA,ex1)" <don_mccall@hp.com> wrote: > Hi Martin, > Thought I would let you know that rsync is failing to > build on HP-UX 11.00 and 11.11 (using HP's ansi C compiler) because of a > test you have for socklen_t; on HP-UX 11.00 and 11.11, socklen_t is not > defined in types.h, but instead is defined in socket.h > Result is that

Trying to compile rsync 2.5.2 after "./configure --prefix=/usr" I get the following make errors: gcc -I. -I. -g -O2 -DHAVE_CONFIG_H -Wall -W -c rsync.c -o rsync.o In file included from rsync.c:23: rsync.h:339: warning: no semicolon at end of struct or union rsync.h:339: parse error before `inode' rsync.h:341: parse error before `dev' rsync.h:341: warning: type

I'm trying to compile R on AIX 5.3. I've gotten "configure" to work but "make" generates the following errors: Target "R" is up to date. Target "R" is up to date. Target "R" is up to date. Target "R" is up to date. Target "Makedeps" is up to date. Target "libbz2.a" is up to date. Target "Makedeps"

This affects the XMMS plugin. configure.in has this test: AC_CHECK_TYPES(socklen_t, [], []) And src/plugin_xmms/http.c is the only consumer: #ifndef HAVE_SOCKLEN_T typedef unsigned int socklen_t; #endif Together this looks bogus to me. The configure check looks for socklen_t in the default headers. If it isn't found there, socklen_t will be typedef'ed. However, at least on

Hi, This I believe is a bug in kernel headers on openSUSE PPC64 but maybe there is some workaround. compiler-rt/lib/sanitizer_common/sanitizer_platform_limits_linux.cc includes asm/stat.h which ends up with errors: /usr/include/asm/stat.h:31:2: error: unknown type name 'ino_t' ino_t st_ino; ^ /usr/include/asm/stat.h:34:2: error: unknown type name

Fr?d?ric, I'm curious as to how you are configuring the windows_port branch. When I try to cross-compile, configure complains about socklen_t: $ ./configure --host=i686-pc-mingw32 Network UPS Tools version 2.4.3 [...] checking for socklen_t... no checking for socklen_t equivalent... configure: error: Cannot find a type to use in place of socklen_t The test (m4/nut_type_socklen_t.m4) is

I am trying to compile R 2.2.1 on aix 5.3 with xlc/xlC 7.0 , but i am getting the error below. I did a search on the archive and someone had a similar error as me but I can't seem to find a fix for the error below. Target "R" is up to date. Target "R" is up to date. Target "R" is up to date. Target "R" is up to date. Target "Makedeps" is up

Here's a configure check to see if socklen_t is defined. Even though my man pages on linux say accept(2) takes (int *) as it's 3rd arg, the sys/socket.h files begs to differ. If not defined (which is doesn't seem to be on AIX 4.2.1), it can be explicitly typedef'ed to (unsigned int). Now do mainstream code changes get submitted back to the openbsd group, or would it be better to

Hi, openssh_cvs as of today, SCO Open Server 3.0, socklen_t this typedef doesn't exist on SCO OSR 3, and "configure" properly detects this, leading to /* #undef HAVE_SOCKLEN_T */ in config.h. Problem: I can't find any place where this is actually being used? I'd expect something like #ifndef HAVE_SOCKLEN_T typdef int socklen_t; #endif ("int" is what the

Well Hello one and all, I am just getting my feet wet here with Linux (Using Mandr... x86 300 Mhz machine) and I have been having a bit of troub... samba. > I have downloaded RPM's, source files, binaries, and what not, read > tutorials after tutorials, FAQ's up the wazo and have still not be able > to get this damned program to work. > > To simplify things I will go

I need to distribute rsync (useable for both client and --daemon) on Win32. Distributing cygwin1.dll is, well you know, a bad idea. I took a shot at building under MingW but ran into an ugly looking error: > checking for socklen_t... no > checking for socklen_t equivalent... configure: error: Cannot find a > type to use in place of socklen_t I will pay $50 for a MingW build of latest

When I run configure on either a DU server running 4.0f or a DU client running 4.0d, I receive the following error: ERROR: No locking available. Running Samba would be unsafe configure: error: summary failure. Aborting config Most directories are mounted using nfs v2 or nfs v3. rpc.lockd and rpc.statd are running on servers and clients. The rpcinfo -p command shows nlockmgr and llockmgr

Hi, When I map directory using samba o nour Windows 2000, I have to type in the IP address of the samba server or the complete domain name; i.e, host.lmsw.lmco.com. I can't just type in the hostname; i.e. host. Your help is very much apreciated. Thanks Aissa Char Lockheed Martin Aero

I've got a user that wants an Access database shared out. I've got a decent machine serving out the directory (300 MHz Pentium II) running RedHat 5.0 (kernel 2.0.34) with Samba 1.9.17p4 (RPM is samba-1.9.17p4-3). I've created a simple share entry in the smb.conf file: [global] debug level = 1 browsable = yes comment = Samba under Linux (RedHat 5.0) domain master = yes

http://bugzilla.mindrot.org/show_bug.cgi?id=1017 Summary: socklen_t test in configure fails/configure stops Product: Portable OpenSSH Version: 4.0p1 Platform: All OS/Version: AIX Status: NEW Keywords: low-hanging-fruit Severity: normal Priority: P2 Component: Build system AssignedTo:

Hi Paul, your suggestion about batch.c got by the compiler without a peep and it got much farther along again with complaint from cc until.... [root@hyperion: rsync-2.5.4]#CC=cc; export CC; ./configure configure: Configuring rsync 2.5.4 checking build system type... alphaev5-dec-osf5.1 checking host system type... alphaev5-dec-osf5.1 checking target system type... alphaev5-dec-osf5.1 checking for