similar to: rsync 246 P24, Sol2.8 - transfer interrupted (code 1)?

Experts, Sorry if this is a FAQ but I''m not on this alias. Please reply directly to me. I''m working on a project setting up a web portal that will use 2 hosts for load balancing ftp''s. I wanted to use ZFS to showcase it to our customer. What I''ve been trying to setup is anonymous ftp to a host that is sharing a ZFS file system. Anonymous ftp is configured and

Hi list, I just experienced an odd behaviour in 1.4.22 vs 1.4.21.2. To cut a long story short, IAX2 is not tx-ing hangup... Scenario is composed of two asterisk systems A and B. A receives calls from IAX users X, Y, Z, etc, does some validation and forwards them to B, also over IAX. When B hangs up, it transmits IAX hangup which A receives who, in turn, does not transmit the IAX hangup to its

Hi, I want to automate some of the maclist and rule functionality: User connects to the network and gets a DHCP address from the shorewall box. Using squid and redirection, all the user can do is go to a login page on the firewall User logs in correctly to the form on the webpage and a process captures MAC and IP address info from the dhcpd.leases file Once authenticated, a maclist entry and an

Before I post to networking-discuss I wanted to ask if anyone had tried this on this: I''m trying to run a dhcp-server on a dom0 over a vnic so that the domU''s can get IP addresses. I created a vnic r1 over e1000g0 and gave it a static IP 172.0.94.111/24 so I can run the dhcp server over this vnic. root@lm2-dom0:~# dhtadm -P Name Type Value

Hallo, I installed nut 2.0.4 on a Solaris 8 and tried two things: First I wanted the ups to connect via usb, but I could not compile the usb drivers. Make usb told me: no target named usb found Second, because both ups and host have serial ports I tried to get it working with serial. The driver starts very fine, but takes a long time to detect the ups. Upsd starts too, but while get in

Greetings Experts! Sorry for my poor english, but I?m inside of a terrible nightmare!!! I?m using Samba+LDAP has about 2 months ago without problems, but in the last 4 hours, the system is absolutelly unstable. I couldn?t upgrade or patched anything. The problem simply has appeared. Principally system characteristics: - Sun Fire V880 running Solaris 9 - openldap-2.2.23 - nss_ldap-232 -

Hello all, I'm running samba 2.2.4 on Sun Solaris version Sunos 5.8 generic_108528-17, Samba version 2.2.4 I'm getting this error in my /var/adm/messages and don't know what it means, I suspect it is also responsible for causing the delays in the application running from the shares. Jun 8 14:53:53 krypton nmbd[3096]: [ID 702911 daemon.error] query_name_response: Multiple (2)

Hi I've compiled and installed 2.2.5 on a Solaris 2.8 box. When attempting to browse the workgroup, a popup messages is displayed: Simple is not accessible. A device attached to the system is not functioning If I check the log file, the following error messages show up: ............ Jul 3 10:08:26 serv03 smbd[1544]: [ID 702911 daemon.error] [2002/07/03 10:08:26, 0]

What does this mean? >Feb 19 07:58:11 apophis upsmon[533]: [ID 702911 daemon.alert] Master privileges unavailable on UPS [ups@apophis] >Feb 19 07:58:11 apophis upsmon[533]: [ID 702911 daemon.alert] Reason: Access denied And is it normal for my UPS (APC SmartUPS 620) to drop into battery mode for a few seconds every day or so? Or is this a main supply glitch? Nothing else in the house

Good day oh technical ones . I was running Samba 4 (client only, not using it as a DC so effectively running Samba 3 code from the Samba 4 tree) and, other than a little "Gotcha!" regarding decoding Kerberos PACs, it was all working perfectly. Then recently I had to upgrade, to "4.2.0pre1-GIT-b505111" (I had to upgrade the OS on the server

I recently upgraded from Samba v3.6.25 to v4.3.3. After the upgrade, I realized I should change my smb.conf because the syslog parameters are deprecated. My old parameters were: log level = 1 syslog = 6 syslog only = yes Also, I built Samba with --with-syslog-facility=LOG_LOCAL7. I'm having trouble replicating the same configuration with v4.3.3. The syslog

Hi all, I have an error message that pops up every time someone connects to my Samba server. All day long I get these messages from smbd: Dec 28 07:27:24 srv-pvcs smbd[638]: [ID 702911 daemon.error] [2004/12/28 07:27:24, 0] smbd/service.c:(252) Dec 28 07:27:24 srv-pvcs smbd[638]: [ID 702911 daemon.error] rhunt1-pc (162.18.178.237) couldn't find service o The last part, "couldn't

Hello, Rsync is working great for me right now, using version 2.6.5 on two Solaris 9 V100 servers. Box A is the source and box B is the destination, and also box B is my rsync server box. Box A is a rsync client. Yesterdar from Box B I pulled 250 meg just fine from box A with rsync. Today from the client I want to just copy over to the server what files have changed today. So my command

In my puppet client I have puppet.conf defined puppet server as mypuppet server = mypuppet.example.net Not sure why the puppet client puppet-test is still sending these noises to the syslog Jun 10 13:36:23 puppet-test puppetd[10863]: [ID 702911 daemon.error] Could not find server : getaddrinfo: node name or service name not known Jun 10 13:36:23 puppet-test puppetd[10863]: [ID 702911

Good day oh technical ones . I was running Samba 4 (client only, not using it as a DC so effectively running Samba 3 code from the Samba 4 tree) and, other than a little "Gotcha!" regarding decoding Kerberos PACs, it was all working perfectly. Then recently I had to upgrade, to "4.2.0pre1-GIT-b505111" (I had to upgrade the OS on the server

I have a solaris 9 box that I am configuring to be a PDC using the latest version of samba authenticating off of an Openldap db. This machine uses the same ldap server to authenticate the unix users but after following documentation for setting up samba/ldap PDC. Using smbldap-populate populated the database with no problems but when I try and run smblclient -L master I get the following

My auth process is dumping core. This happens several times per day but dovecot can operate normally for hours between errors. The crash occurs in src/auth/auth-policy.c, line 356: t at 1 (l at 1) program terminated by signal SEGV (no mapping at the fault address) Current function is auth_policy_parse_response 356 context->request->policy_refusal = FALSE;

I tried making my own repo with just the groups in them and I got an error.... I used: #createrepo -g /root/mygroups.xml /root/myrepo Saving Primary metadata Saving file lists metadata Saving other metadata Generating sqlite DBs Sqlite DBs complete Where /root/mygroup.xml is attached below. Then I made: cat > /etc/yum.repos.d/myrepo.repo << EOF [myrepo] name=My repo for armhfp

On 08/06/2018 11:51 AM, Tony Schreiner wrote: > On Mon, Aug 6, 2018 at 11:33 AM Robert Moskowitz <rgm at htt-consult.com> > wrote: > >> >> On 08/06/2018 11:11 AM, Tony Schreiner wrote: >>> On Mon, Aug 6, 2018 at 10:55 AM Robert Moskowitz <rgm at htt-consult.com> >>> wrote: >>> >>>> Nicolas, >>>> >>>>

We're seeing an issue with 1.2.12 where over-quota rejection messages are appearing in the logs with <> as the sender. The sender of the original message sees the appropriate sender (postmaster@) on the rejection, but as the message makes its way through the postfix/amavis chain, I can see that the sender address is missing. Aug 20 10:55:56 inet1 amavis[21822]: [ID 702911