similar to: OCFS2 showing "No space left on device" on a device with free space

Hi everyone; I have a problem on my 10 nodes cluster with ocfs2 1.2.9 and the OS is RHEL 4.7 AS. 9 nodes can start o2cb service and mount san disks on startup however one node can not do that. My cluster configuration is : node: ip_port = 7777 ip_address = 192.168.5.1 number = 0 name = fa01 cluster = ocfs2 node: ip_port =

Hi All, I'm trying to install a VM on host OS (Redhat 6.1, KVM hypervisor). I've installed all the required RPMs for KVM and libvirt tools. Here is the list of libvirt RPMs and KVM modules *kvm.ko kvm-intel.ko libvirt-0.8.7-18.el6.x86_64.rpm libvirt-java-devel-0.4.7-1.el6.noarch.rpm virt-top-1.0.4-3.8.el6.x86_64.rpm libvirt-client-0.8.7-18.el6.x86_64.rpm

I looked around, found older post which seems not applicable anymore. I have a cluster of 2 nodes right now, which has 3 OCFS2 file systems. All the file systems were formatted with 4 node slots. I added the two news nodes (by hand, by ocfs2console and o2cb_ctl), so my /etc/ofcfs/cluster.conf looks right: node: ip_port = 7777 ip_address = 192.168.201.1 number = 0

I have a setup with lot's of small files (Maildir), in 4 different volumes and for some reason the volumes are full when they reach 60% usage (as reported by df ). This was ofcourse a bit of a supprise for me .. lots of failed writes, bounced messages and very angry customers. Has anybody on this list seen this before (not the angry customers ;-) ? Regards, =paulv # echo "ls

hi there i try to setup OCFS2 with loop device /dev/loop0 i've 4 servers running SLES10 SP2. internal ip's: 192.168.55.1, .2, .3 and .6 my cluster.conf: -------------------------------------------- node: ip_port = 7777 ip_address = 192.168.55.1 number = 0 name = www cluster = cawww node: ip_port = 7777 ip_address = 192.168.55.2

Hi, I'm trying to make a attended transfer through AMI. I though i could use Atxfer, and it seems ok, but nothing happens. And I can't find any how-to or description on how to do this. What more do I have to do to make this work? In Asterisk Call Manager: Action: Atxfer Channel: SIP/36-xxxxxx Exten: 33 Priority: 1 Context: Phone Response: Success Message: Atxfer successfully queued

We're trying to setup 3 PRDM partitions (VMware) across 2 nodes. As long as only one is configured in cluster.conf, there's not problem. As soon as we try to use 2 or more we get issues. It looks the same as bug 636: http://oss.oracle.com/bugzilla/show_bug.cgi?id=636 I posted my cluster.conf and command line results there. I'm including them here in the hopes that someone on this

Hi Greeting to all you out there. I am new at asterisk, I have been working with PLMN platforms telecommunication for 5 years with NSN and Huawei. We have recently built an asterisk PBX with Trixbox and connected it to our MSS using Digium E1 cards(ISDN). Everything went smoothly as there are tons of information out there, except for the TON number. If you have worked in Telecommunication you

I had occasion recently to read in a one-line *.csv file that looked like: "CandidateName","NSN","Ethnicity","dob","gender" "Smith, Mary Jane",111222333,"E","2/25/1989","F" That "F" (for female) in the last field got transformed to FALSE. Apparently read.csv (and hence read.table) are inferring

Hi, I am trying to configure a two node cluster on SLES10SP2 using user level heartbeat. Here is my configuration. ocfs2-tools-1.4.0-0.3 **user level heartbeat** -> lsmod | grep ocfs ocfs2_user_heartbeat 20992 1 ocfs2_dlmfs 37776 1 ocfs2_dlm 204456 1 ocfs2_dlmfs ocfs2_nodemanager 223384 6 ocfs2_user_heartbeat,ocfs2_dlmfs,ocfs2_dlm configfs 44700 3 ocfs2_user_heartbeat,ocfs2_nodemanager

Hi List, i'd like to share with you what happened yesterday. Kernel 2.6.36.1 ocfs2-tools 1.6.3 (latest). I had an old OCFS2 partition created with a 2.6.32 kernel and ocfs2 tools 1.4.5. I unmounted all partitions on all nodes in order to enable discontig-bg. I then used tunefs to add discontig-bg, inline-data and indexed-dirs. During indexed-dirs tunefs segfaulted and since then, fsck

Hi, [1] Are there guides for setting up a virtual switch for use in between guest domains in Xen ? [2] In Xen, is it possible for a guest domain to perform a initial dhcp IP lookup from another guest domain ? How are the configurations like ? Are there references or step procedures ? Kindly advice. Thanks. _______________________________________________ Xen-users mailing list

Hi, I want to share a partition of an external disk between 3 machines. It is located on a Sun StoreTek 3510 and bound (via multipathing) to all 3 machines. One machine (say mach1) is the node I used to create the filesystem and setup /etc/ocfs2/cluster.conf. I copied the file to the other 2 machines. All use the same /etc/multipath.conf[1], too. All start /etc/init.d/ocfs2 at boot, all are

Hi all, In the sieve file require ["copy"]; redirect :copy "asdf at asd.pl"; emails with headers containing \n in non terminated " field like Cc: xxx <xxx at plus.pl>, "asd, Grzegorz " <xxxxx at nsn.com> Subject: RE: RF after redirecting them Cc: xxx <xxx at plus.pl>, "asd,\ \ Grzegorz " <xxxxx at nsn.com> Subject:

Hi, [1] I have spent time learning Xen, as compared to Vmware. Is there an opensource tool for managing the various Xen domains both locally and remotely ? It can be commandline or GUI based. VMware has a Lab Manager. I am looking for something similar (or superior) for Xen too. [2] Redhat has the virt-manager. And allows us to connect the hypervisor to local host and remote host. How does that

Hi, our Asterisk is connected to an E1 port. So we are using the DAHDI-Driver. Please , how do I tell the driver/Asterisk to wait for overlap digits for in-calls? I found the option "overlapdial=yes" but I did not try yet. Is that "my" option? Is there any option for setting an timeout? Thorsten

We have a test 10gR2 RAC cluster using ocfs2 filesystems for the Clusterware files and the Database files. We need to increase the node slots to accomodate new RAC nodes. Is it true that we will need to umount these filesystems for the upgrade (i.e. Database and Clusterware also)? We are planning to use the following command format to perform the node slot increase: # tunefs.ocfs2 ?N 3

We have an application that has many processing threads writing more than a billion files ranging from 2KB ? 50KB, with 50% under 8KB (currently there are 700 million files). The files are never deleted or modified ? they are written once, and read infrequently. The files are hashed so that they are evenly distributed across ~1,000,000 subdirectories up to 3 levels deep, with up to 1000 files

An HTML attachment was scrubbed... URL: http://oss.oracle.com/pipermail/ocfs2-users/attachments/20110303/0fbefee6/attachment.html

Hi to all, this is My first time on this mailinglist. I have a problem with Ocfs2 on Debian etch 4.0 I'd like when a node go down or freeze without unmount the ocfs2 partition the heartbeat not fence the server that work well ( kernel panic ). I'd like disable or heartbeat or fencing. So we can work also with only 1 node. Thanks