similar to: Netinstall wants to use wlan0

Hello good day to all ... this is my setup 1 Linux Wireless Access Point, connected are 4 wireless gateway in which i needed to apply shaping ... ok here is the weird part... clients on each gateway download files from the Acess Point ... a 500 mb file through ftp on gateway 1 which is up to 64 kbps ... the result is from 60-64 kbps speed which is fine ... on gateway 2 which is 128 kbps ... the

Hello, I would appreciate any feedback/suggestions on my Shorewall configuration for a standalone laptop Debian Squeeze configuration for ppp0 and wlan0, set out below: ------------------ My current system: ------------------ I have successfuly configured Shorewall 4.4.11.6 on my standalone Debian Squeeze laptop for a ppp0 (Mobile broadband) connection using GNOME PPP, works great (refer to

Hello. I burned a CD with the 5.2 netinstall iso, and installed it onto a laptop (Acer Aspire 3680). Note that I'm *totally* new to laptops. The install went fine. But, when I boot it, it errors at the user login. A screen comes up, stating that X11 cannot start, and that it's probably the mouse. A bit of investigating revealed that there is no Synaptics module installed. It will

Hello all, I would like to find a soluce fo a very annoying problem I have since I've installed CentOS 5 on my Lenovo R60 Laptop... Everything works correctly excepted a small thing, the nm-applet of NetworkManager-gnome always report my wlan0 in error status, even when my wifi network is connected correctly and working without problem... It behaves as if wlanx intefaces were not recognized

Hello all, I'm trying to bridge the wlan0 and eth0 on an embedded system. I used the following commands to setup the bridge: ifconfig eth0 0.0.0.0 promiscuous ifconfig wlan0 0.0.0.0 promiscuous brctl addbr br0 brctl addif br0 eth0 brctl addif br0 wlan0 brctl sethello br0 1 brctl setmaxage br0 4 brctl setfd br0 4 ifconfig br0 up The eth0 is connected to a local network, and wlan0 is set to

This is a continuation of my previous thread: "Broadcom Wifi Problem" Following a post from "James A. Peltier", who said: You can use the rpmforge version or compile it yourself. I've used this one with success using the details described earlier. http://www.broadcom.com/support/802.11/linux_sta.php I did however have to patch it with

Opps! After reading the email below I noticed something in ''ifconfig''. The wireless interface is ''wlan0'' not ''wan0''. I modified the wireless interface in /etc/shorewall/interface to wlan0 started shorewall I can connect eo the INTERNET with shorewall running Horace From: Horace Franklin Jr

I tried isolinux 3.10-pre20 on an Acer Aspire 1501LMi notebook and a Shuttle FS-40 desktop box; it fails on both, simply hanging after printing the first line. Last known good version is 3.10-pre16; will try pre17-pre19 when I have some time.

Hi all! I'm running an up to date Centos-7 on my Acer Aspire One netbook. have been for, well, ever since C7 was released. Just had an event today that also happened 2 or 3 times with earlier systems installed, but I never pursued it. What happens is that suddenly while working away on the desktop the display suddenly goes black... not black as in turned off, I can see that the backlight is

Very rarely is a netbook officially announced any more, as it is more often revealed by another means. The upcoming HP Mini 210 netbook (http://www.laptopspark.com/products/HP-EliteBook-8540w-XT904UTABA-Notebook-Intel-Core-i7-640M280GHz-156-4GB-Memory-DDR3-1333-320GB-HDD-7200rpm-DVD-Super-Multi-NVIDIA-Quadro-FX-880M-laptop-1129.html) has been reveled by two sources, an Internet retailer which

I currently have my Acer Aspire One netbook set up with Fedora 11. I would like to change it over to Centos 5.4 if I can. I downloaded the Centos 5.4 i386 livecd image and made a bootable USB flash drive out of it. Unfortunately, when I boot off of that flash drive, Grub (I guess) immediately turns the screen entirely white. If I hit a key I can faintly see the outline of "Press tab to

Hello, I have the AR9285 wireless adaptor on an HP DV6-2128ca notebook. I can see it. it comes up in NetworkManager but never gets an IP. the router is a linksys using WPA/PSK security. Would/could someone please help me out trying to get this to work? Output of several commands follows: dmesg: ath: EEPROM regdomain: 0x69 ath: EEPROM indicates we should expect a direct regpair map ath:

Hi, i have an acer aspire one that have linpus (an lite version of fedora), so i want to play Guild Wars on that. Afer working, with wine-door, playonlinux i can install the game and i can run it, but after download the upgrade the game and before starting the log-in the game stops to work and it retur to the desktop with an other resolution of the screen... I can't understood why i can't

Hi, my box is connected to 3 networks, eth0 eth1 wlan0. I want "my" traffic to go via wlan0 and everything from eth1 NATed to eth0: eth0 192.168.1.10/24 eth1 172.16.1.1/12 wlan0 192.168.10.190/24 I first tried this with two single hosts: iptables -A POSTROUTING -j MASQUERADE -o eth0 -t nat iptables -A POSTROUTING -j MASQUERADE -o wlan0 -t nat echo 200 Forw >>

I have an Everex laptop (ick, but it was super cheap) that has an Atheros wireless NIC in it, but I can't seem to get it to connect to my wireless in-home LAN. Here's what I've done so far (that isn't working) - any suggestions? [root at marktop mark]# lspci | grep Ether 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c) 05:01.0 Ethernet controller:

On 03/06/16 14:48, Richard wrote: <<>> > You may want to look at the yum "shell" option (man yum-shell). > -- interesting. would you presume that something like this might run? yum-shell install < pkg-list.file > The dvd iso and netinstall approaches are very different. The dvd has > everything while netinstall assumes you pull the packages from >

Hi! I'm not a programmer, so I will try and be as clear as I can. I currently have an Acer Aspire One which has issues with syslinux 4.06 When I try and make a usb bootable install key using common automated programs under windows (Universal USB installer from Pendrivelinux, LiLi and unetbootin), they all fail when booted on the netbook. Now, I know it's an issue with syslinux for many

I persuaded a reluctant friend to buy a new computer. I enthusiastically extolled the joys and benefits of Centos and promised to install it on his new machine - dual booting with Micro$oft Windoze 7. His super-duper new laptop arrived. Acer, AMD 4 core, fast etc. but not as nice looking as my impressive HP DV5. The wireless refused to connect. After 8 hours on Saturday I could sometimes see

system: hp compact dc7800 dual 64 bit cd/dvd: oem sata -- recognized as atapi dvd c dh48c2s sata5 cd/dvd: lg gp60ns50 usb dvd -- recognized as hl-dt-st dvdram gp60ns50 attempting install using centos 6.7 x86_64 netinstall. after 'installation method' with 'local cd/dvd' selected, famous 'disc not

On 03/05/16 09:04, Chris Murphy wrote: > You don't say how you created the media. > -- true, i did not say how i created cd's. i used k3b as it is easier, less to remember, than using command line. usb's sticks were created using unetbootin and fedora-liveusb-creator. yes, i did not mention that i tried with 2 usb sticks. failure was same, did not feel it mattered. failure is