similar to: World of Warcraft - IBM T400 Intel Graphics, FC13 - opengl

Can anyone clue me in about these T400 T1 cards I see advertised? I hear they are Digium Clones. Is there some reason to avoid these? How do they compare to TE410P's for example. Bart

I know a few ppl have those CAC Adit 600's with t400 I can't seem to get my second span up on the T400 connected to the second spand on the adit (A:2) A:1 seems ok Can someone post they zaptel.conf span defintions And maybe a "print config" from the adit 600 cli I think my issue is timing srcs the coding, framing. bld out are all matched thx -------------- next part

Hi, FreeBSD-9 works fine on this Lenovo T400 - except that suspending with no USB devices plugged in result in no ports working after resume. If I have a device plugged in during suspend - on any port - then all the ports work fine after resume. I've attached usbconfig and acpidump output. here's what is logged in the kernel buffer during suspend and resume: Her'es the suspend:

Hi, I have a problem booting the Xen hypervisor on my brand new Lenovo Thinkpad T400 2765D2G (Core2 Duo P8600 CPU, 2.40GHz. 4GB RAM). I''m running Debian 5.0 (Lenny) and I use the Debian-provided xen-hypervisor-3.2-1-amd64 package. The Dom0 kernel seems to be the Xen patches ported to a 2.6.26 kernel: linux-image-2.6.26-1-xen-amd64 I can boot the hypervisor only very unrealiably: Out of

Hi, I am trying to merge Lustre into Fedora 13 kernel (2.6.33.3-85.fc13.i686.PAE) I plan to submit the patches and continue to develop features on this kernel. will I get any assistance from the lustre development team. Can I maintain this patch on lustre website ? Regards, Onkar -- **************************************************** A 1965 Ford Mustang is a great car. But if you want to go

Hi, I am trying to merge Lustre into Fedora 13 kernel (2.6.33.3-85.fc13.i686.PAE) I plan to submit the patches and continue to develop features on this kernel. will I get any assistance from the lustre development team. Can I maintain this patch on lustre website ? Regards, Onkar -- **************************************************** A 1965 Ford Mustang is a great car. But if you want to go

Hi, the reporting person has tried also with vanilla icecast source compiled. The setup is: Liquidsoap in MP3 mode sending a stream Winamp pulling the stream A flash applet requesting a custom XSLT file every 10s The output of valgrind is: ==13821== ==13821== HEAP SUMMARY: ==13821== in use at exit: 1,744,928 bytes in 4,194 blocks ==13821== total heap usage: 41,508 allocs, 37,314 frees,

Hello I'm running Slackware and have been playing WoW on it with Wine for some time with no issues. I while back I decided to try out a new distro Kubuntu and had no problems running WoW on it either. About a week ago I went back to Slackware and installed the latest Wine Slackware package.and had issues running WoW. Sometimes it will run for a while then crash but most of the time it will

1. Attempt to load Nexenta under 2.6.32.16-1.2.108.xendom0.fc13.x86_64 Xen 4.0.1-rc6-pre & 2.6.32.16-1.2.108.xendom0.fc13.x86_64 on top F13 [root@fedora13 NexentaStor-Community-3.0.2]# uname -a Linux fedora13 2.6.32.16-1.2.108.xendom0.fc13.x86_64 #1 SMP Fri Jul 23 17:09:30 MSD 2010 x86_64 x86_64 x86_64 GNU/Linux [root@fedora13 NexentaStor-Community-3.0.2]# xm create -c

# smbd -Fi -d 2 smbd version 3.5.4-62.fc13 started. Copyright Andrew Tridgell and the Samba Team 1992-2010 uid=0 gid=0 euid=0 egid=0 rlimit_max: rlimit_max (1024) below minimum Windows limit (16384) Registered MSG_REQ_POOL_USAGE Registered MSG_REQ_DMALLOC_MARK and LOG_CHANGED rlimit_max: rlimit_max (1024) below minimum Windows limit (16384) Processing section "[homes]" Processing section

Hi guys, I wanted to fetch some info from webpage and use it in my db. I read hpricot is one way to do it. But the problem is I''m unable to use it with my app. For some reason after successfully installing hpricot it fails when I try to use it in the rails console. I''ve been trying to fix this for the last four-five days. I''m stumped ! I tried re-installing everything

Hello, I'd like to add rules (level workstation) for ignoring wlan reconnects/disconnects. The rules would ignore messages like this: May 12 11:02:16 t400 kernel: [13254.204101] No probe response from AP <MAC> after 500ms, disconnecting. May 12 11:02:16 t400 kernel: [13254.213029] cfg80211: Calling CRDA to update world regulatory domain May 12 11:02:16 t400 wpa_supplicant[3277]:

Is there something special that needs to be done to allow a T100P/T400 to respond to a remote loop request? I am having some issues with a Point to point T1 line using zaptel ppp. This line gave us small problems when we had a pair of Cisco 2600's on either end but now with the zaptel ppp it is going down every couple of minutes for 15 intervals. The phone company says the line is good to

Hi Jean-Marc I am using speex in my voip app (wideband mode). I have noticed that when VAD kicks in, CPU considerably increases (bitrate decreases to 4 kbps). It takes about 7 ms to encode one frame versus 0.5 ms (for speech). This happens regardless preprocessor is used. Although the issue seems to be driver dependent, it occurs on XP, Vista and Mac OS X. Besides complexity and quality, this

Hi All... My Asterisk system uses VoIP and also 2 POTS lines from Cox Communications. Recently, the dial tone presentation from Cox seems to have slowed, so it can take as long as 3 seconds to get a dial tone. The problem I am having is that Asterisk does not seem to wait for the dial tone when dialing out. I'm using zaptel T400 cards. Is there any way to configure it such that I can

Hi, folks I installed Xen 3.3 on my Lenovo T400 notebook, via compiling source code. When I boot from the linux xen 2.6.18, the network fails start and xend fails too. The network adaptor is Intel 82567LM Gigabit Network Connection. Does anybody else get the same problem? I cannot figure it out whether this is caused by driver support of xen or faulty configuration. Need your help and thanks a

I tried to run ePSXe 1.7 with wine, everything worked fine but after about a minute the entire computer would freeze. I have a ThinkPad T400 with integrated graphics (Graphics = Intel GMA X4500) with Fedora 11 64bits installed. Everything works fine, I have been on linux for more than a year and it's the first time I see a kernel failure.

Heh guys, I just received a T400 card, I've been using a T100 for a little while, and it works fine when using a raw channelized T1. I'm relocating my asterisk machine, and PRI's will only be available, haven't found any good config info for PRI's, can someone point me to PRI config info, or let me know what changes I need to make in order to bring them up, I imagine,

Hey my R buddies, I installed the "snow" and "rpvm" package on my Lenovo Thinkpad T400 today. The experiment below gave me a surprise. The time consumed by serial processing was several times larger than that taken by parallel processing. I'm very curious how this happened. Thank you very much. > library(snow) > > cc <- makePVMcluster(2) > > temp <-

Hi Everyone. I have a client that uses an Altigen system. I am really new to PBX systems so all this is totally foreign to me. They currently have 5 inbound trunk lines and about 20 analog phones. >From what I can gather they are using the Altigen Quantum cards that support 8 extensions and 4 trunks. >From what I can gather the solution is a TDM04B and TDM01B to bring in the lines from