similar to: Diva-GIS infected file?

Hi; I've got an AAH installation where a customer wants to install an active Eicon DIVA BRI card. AAH is built on Centos 3.5 which is currently at kernel 2.4.21.37. Support for Eicon active cards is built-in. I've debugged and run the A@H install-Eicondiva script but when I try to run divactrl load -c 1 -f ETSI -Debug I get a response : A: can't get card type for DIVA adapter

Hi (Armin?) ! Today I had a problem with Diva Server 4BRI-8M 2.0. Asterisk 1.2.12.1 chan_capi-cm-0.6.5 divas4linux-melware-3.0.f-106.622-1 Asterisk could not receive and make calls on the BRI ports, although the ports looked fine within Asterisk. I usually use "/usr/lib/divas/divactrl dchannel -c 1" to test line activity. This time there was no activity (cryptic log

fixme:mountmgr:harddisk_ioctl unsupported ioctl 560000 fixme:mountmgr:harddisk_ioctl unsupported ioctl 560000 fixme:mountmgr:harddisk_ioctl unsupported ioctl 560000 fixme:reg:RegSetKeySecurity :(0x50,4,0x13d45c8): stub X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 159 (GLX) Minor opcode of failed request: 5 (X_GLXMakeCurrent) Serial

Hello, I have an issue getting the chan_capi module to load in asterisk cvs from today. Plain 2.4.20 kernel with melware patches for the Eicon Diva Server Bri card. I load the modules with: modprobe -v divas divacapi I load the firmware with: divactrl load -c 1 -f ETSI -vd6 Output in /var/log/messages is: Nov 9 19:26:26 voice kernel: Eicon DIVA - DIDD table (http://www.melware.net) Nov 9

Which models of Diva could work with CAPI and asterisk? Thanks Giordano ________________________________ Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di gw@adcomcorp.com Inviato: sabato 1 ottobre 2005 23.46 A: asterisk-users@lists.digium.com Oggetto: RE: [Asterisk-Users] Diva Nope. At least I tried and never could get it

Hello all, I am trying to set up asterisk and hylafax to send and receibe fax. The machine is connected to the PSTN is an Eicon Diva BRI (1 BRI port). My problem is that , when I send a Fax from the PSTN to this machine, the asterisk or diva or hylafax, does not detect this call as a fax and asterisk answer that call like a voice call. How sould I configure the software modem (iaxmodem) to use

Hello, We have been using a Diva 4BRI with our Asterisk PBX through the capi interface for almost a year now with good results. However, recently we started to hear heavy clicking sounds in our phones when two simultaneous incoming calls are processed by the card. The clicking does not originate with the phones as it happens also in voicemail left directly on the server and happens with different

Hi list, Does chan_capi work with kernel 2.6? The Eicon Diva server card loads fine judging from /var/log/messages but Asterisk gives an error when trying to load the chan_capi module. I'm using chan_capi-0.3.5, zaptel-1.0.0, libpri-1.0.0 and asterisk-1.0.0 on a Fedora box with kernel 2.6.8-1.584. Zaptel and ilbpri work fine as does *. I have seen a msg that may be related and don't know

Dear All, Has anyone worked with linking R to both ArcView and MapInfo GIS systems? My desire is to capture object selection from GIS and pass to R and to return spatially based statistical model results from R to GIS. If both could simultaneously access the same data file this would be a bonus. My inclination is to put together some routines based on ODBC linking but thought I would seek like

Hi Guys! I got a Diva passive ISDN card and I can't get it work with asterisk 1.4, It is supported in the kernel as an isdn4linux device but I can't find "Modem" channel type when i type in: core show channeltypes. I'm guessing it is removed in asterisk 1.4. Tried with capi interface but it does not work :( Anybody got some idea how can i make it work or got a link to a

Hi all, I have a Diva Server V-BRI-2 card, which support, as written in reference guide: Extended tone processing (human talker detection, generation and detection of country-specific tones) I would like to detect human speech and fax tone with asterisk. I think that the diva card transmit a DTMF code when detecting voice, but chan_capi doesn't receive this DTMF code. I verbose it

Hey guys This is probably for Armin, but I thought maybe someone else might have something I could try. I'm having a problem with one of my Eicon Diva V-4BRI cards and I'm trying to work out if its a driver configuration error, card failure or telco problem: I have an Asterisk box running -- the Eicon drivers see all four ports on my card, capi.conf is configured with all four ports

Hello, I need to detect both fax and answer machine, and it should be valuable that the detection will be run by the Diva card itself. So : - I read Diva Documentation, and I found that the Diva could send some specific DTMF, if I had "[..] enabled [this functionnality] by the application for a designated controller through a manufacturer request command 9 [...]", but I didn't

Hi Gurus! I have a job that is to get randomly samples from point-based GIS data (sp called shape GIS files) under the total sum resctricted. For example, I would like to take random smaples under the 1000 persons in each city. The randomly sampled persons should not be over 1000 any case. Thank you in advance, -- Kum-Hoe Hwang, Ph.D. Phone : 82-31-250-3283 Email : phdhwang@gmail.com

Hello everyone, I'm having some errors while compiling the source code for an Eicon Diva BRI card. I am using Fedora Core 6 with a compiled from source Linux kernel 2.6.19. I have downloaded the Eicon Diva source RPM (divas4linux_EICON-106.12-1.i386.rpm) and installed it already. When I go to /usr/lib/eicon/divas/src/ and run ./Build, everything starts correctly until that part where it has

See bug 23374. Originally, this was an issue raised for one particular game. But my experiences with other games from the same company indicate that this may be a more widespread problem for their games. The original poster tried one of their "Strange Cases" games. I've tried a "Natalie Brooks" and an "Alabama Smith" adventure. Each keeps coming up with the

I am trying to understand the difference between the divas4linux available from the Eicom/Dialogic website and the melware version. Am I right in thinking that the melware version is for Trixbox or Asterisk but the Dialogic version is for Asterisk only (i.e. will not work with Trixbox?). I've noticed that some of the things mentioned on the Dialogic web site as included with Divas e.g.

Dear R Community- I am a new user of R. I am using R with GRASS GIS. I would apply svm "on" raster data in GRASS. Basically I have a raster with "areas training" and other three raster (each represents a band of ASTER satellite image). My goal is to classify, according to training areas, the 3 raster. Trying to replicate the guides found on the net, I did the following: #

I have no experience with GIS whatsoever. I really know squat about it. I'm currently working on a project to plot locality data for wildlife on a map of Shasta County. This is for a new herpetological club that hopes to track strength of our local herp populations, since it seems evident that in the last 20 years we lost one species of frog and are close to losing another (probably less

Hi all, just a question: can i use this kind of diva for asterisk? 00:14.0 Network controller: Eicon Networks Corporation Diva ISDN Pro 3.0 PCI Thanks all Giordano -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050930/4cc2a38d/attachment.htm