similar to: wine and snmp

Hi, I just installed NUT to monitor 4 UPS, all APC, all with Network card APC 9617. NUT have problem to access the following SNMP OID on all the UPSes: Detected Smart-UPS 3000 XL on host apc4.cs.ait.ac.th (mib: apcc 1.1) [apc4] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.2.2.1.2.1: Error in packet: (noSuchName) There is no such variable name in this MIB. [apc4] nut_snmp_get:

I am working with three Liebert GXT2 UPSes connected via local TCP/IP under Linux 2.6.25.1 and getting a series of messages. First, at start, the drivers complains that the Liebert apparently extract information from certain MIBs in the ietf MIB file.... Network UPS Tools - UPS driver controller 2.2.2 Network UPS Tools - Multi-MIBS SNMP UPS driver 0.421 (2.2.2) Warning: This is an experimental

This mib used to work, so is there a way to go back to the version prior to this one without downgrading the whole package? * Starting UPS drivers... Network UPS Tools - UPS driver controller 2.4.1 Network UPS Tools - Generic SNMP UPS driver 0.44 (2.4.1) Detected GXT2-2000RT120 on host upswallleft (mib: ietf 1.3) [upswallleft] nut_snmp_get: 1.3.6.1.2.1.33.1.4.4.1.4.0: Error in

I meant to send this to the list but evidently only sent it to David. Since sending it I've done a second test which shows what a successful snmpset looks like. First attachment, from the forwarded email, is nutout.txt. Second attachment is snmpout.txt. nomad -------- Forwarded Message -------- Subject: Re: [Nut-upsuser] [EXTERNAL] SNMP shutdown timing out Date: Mon, 4 May 2020 09:28:57

Is anyone using snmp-ups with the -k option successfully? This is really starting to look like a bug somewhere in nut, not a config problem. I've just tried the same command from a FBSD box with the same unfortunate result. Mind you, it could be the UPS card, I'm using the same one for both tests. : || nomad at castle nut-2.7.4 [93] ; please drivers/snmp-ups -a nutdev1 -x

Hi, I got a shiny pair of new PowerWare 9155 UPS (3 input phaes, one output phase), running parallel. Since I didn't want to install a Windows box to run Powerwares software I now went nut(s) ;-) So far things look pretty good, snmp-ups talks to both ups using the pw mib. Though I get these messages, when I start the driver: [ups2] nut_snmp_get: 1.3.6.1.4.1.534.1.4.4.1.3: Error in packet:

Hi, I got a shiny pair of new PowerWare 9155 UPS (3 input phaes, one output phase), running parallel. Since I didn't want to install a Windows box to run Powerwares software I now went nut(s) ;-) So far things look pretty good, snmp-ups talks to both ups using the pw mib. Though I get these messages, when I start the driver: [ups2] nut_snmp_get: 1.3.6.1.4.1.534.1.4.4.1.3: Error in packet:

It seems that you have load the "survival" package date.mdy is a function from this one. In this function the "origin" of the time is the first day of 1970 in the base package the origin is the first day of 1960 it's very curious... Benjamin Esterni France From: "Vegard Andersen" <vegard.andersen@ism.uit.no> Subject: [R] Date conversion problem using

Hello! I am using the coxph() function for counting process data. I want to include an intervening event as one of my covariates. In order to do this I have split the relevant observations in my data at the time of intervention. But I have not found any way to "inform" coxph() of the id of these observations. The result of this is that coxph() interprets the split data as

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I figured out why nut seemed to segfault at startup from my Solaris boxes (and snmp-ups too) - I believe that nut is trying to use some MIBs that do not exist on my particular PW9170, for whatever reason. It dies on my Linux box too, complaining like this: pkdick:~/nut/bin# ./snmp-ups -x mibs=pw -x community=publicstring upsname Network UPS Tools -

Hi I'm trying to build the perl modules of net-snmp-5.4.2. Everything seems to work fine until "make test"[1]. The problem with "DynaLoader.pm" seems to be an old one. The machine is Centos 5.2 i386 I'm trying to build instead of using the one available in the repos because I'll build in other platforms and also in nagios-plugins. Thanks Marcelo [1]

Hi I have a fresh install or Centos 4.2 with a orinoco silver pcmicia wireless card with a Yenta socket pci-pcmcia bridge. Cent0S no found any device. How I configure it ? If I type: modprobe yenta_socke modprobe orinoco These modules loads but not works. (This card works with Slackware and Ubuntu with a default install) Any help ? roberto -- Ing. Roberto Pereyra ContenidosOnline

Thanks Antont and Gabor.. I will use the iterator instead.. On 5/11/07, Anton Korobeynikov <asl at math.spbu.ru> wrote: > Hello, Ferad. > > > I switched to the upcoming version 2.0 branch and porting my code from > > 1.9. Thanks there is not a lot to do. I found that > > Instruction::getNext and Instruction::getPrev are private. Is this > > intentional? >

Hello list, I've installed NUT on an HP blade server, and I try to get it communicating via SNMP with 2 HP R3000 UPSes, each fitted with a AF465A management card. To do this, I used the snmp-ups driver, and configured it for the "cpqpower" MIB. Communication with the UPSes is established. My problem is that both UPSes constantly return the "OL OB" status which, in

Hi all! I've got a datstructure like this: subject week value 1 1 4 2 1 8 3 1 3 4 1 5 1 2 5 2 2 6 3 2 2 4 2 6 1 3 3 2 3 7 3 3 3 4 3 7 I'd like to plot the mean of 'value' against week. Is there a direct way of doing this or do I have to make a new structure with the calculated values and then plot it? All the best! -- ########################################### Kare

I'm trying to set up nut with a MGE UPS equiupped with a network management card, but encountered a problem. UPS: MGE Pulsar M 3000 Network Management card (installed in the UPS): 66102 (2006 edition) Operating system: FreeBSD Nut port version: 2.0.5 Nut driver: snmp-ups According to MGE in Norway this card is supported by nut, but only the old version of the card (66244) is listed on

Hi, I have been trying to randomize blocks in a program and modified "BasicBlockPlacement.cpp" for the purpose but getting segmentation fault.I am not able to determine the problem.Can anyone please decrypt these error messages or suggest what might be the possible cause of failure? -----------------------------------------------------------------------------------------------------

Has anyone gotten the Lucent / Orinoco injectors (AE-1, AE-6, AE-12) to work with the Cisco 79* series phones? I'm not sure if the are the statndard POE or not.... -Darren

On Wed, Sep 19, 2007 at 05:24:12PM +1000, Emil Mikulic wrote: > http://goanna.cs.rmit.edu.au/~emil/llvm2.1-check-debug.txt Here's an ARM test that cores: $ llvm-as < /home/emil/ll/llvm-2.1/test/CodeGen/ARM/2007-01-19-InfiniteLoop.ll | llc -march=arm -mattr=+v6,+vfp2 Segmentation fault (core dumped) $ gdb `which llc` llc.core [...] (gdb) where #0 0x0853d606 in

I'm writing an publication in two column format and need to shrink some plots. After increasing the axis labels it does not look nice at all. The y-axis label and tick labels almost touch each other and the x-axis tick labels expand into the plot instead of away from it. Is there a better way than "cex" to control the: 1) font size of axis and tick labels 2) font thickness 3)