similar to: Web Site centos.org is down

Hello, I''ve got this problem. There is an linux server with 2.4.24 kernel and pinging from him to internet (or from lan) ping randomly jumps up: 64 bytes from fortas.ktu.lt (193.219.160.131): icmp_seq=387 ttl=59 time=30.0 ms 64 bytes from fortas.ktu.lt (193.219.160.131): icmp_seq=388 ttl=59 time=32.6 ms 64 bytes from fortas.ktu.lt (193.219.160.131): icmp_seq=389 ttl=59 time=34.9 ms

How do I allow traceroute to reach my server? Pings work fine but traceroute stops at the last hop before my server. If I shut off the firewall it reaches it fine. PING danicar.net (24.222.246.120): 56 data bytes 64 bytes from 24.222.246.120: icmp_seq=0 ttl=237 time=104.0 ms 64 bytes from 24.222.246.120: icmp_seq=1 ttl=237 time=74.9 ms 64 bytes from 24.222.246.120: icmp_seq=2 ttl=237 time=90.6

HW: Lenovo T520 laptop with MS WIN 7 OR dedicated PC (DELL GX 280) SW: CentOS 6.5 (64-bit) installed using VMware Player on MS WIN 7 host CASE A) -- BRIDGED networking selected CASE B) -- NAT networking OR CentOS 6.5 i(32-bit) nstalled on real HW (DELL OptiPlex GX 280) ___issue____ at hand: The default Firefox ESR browser (17.0.10) does not find many web pages.

Am 22.06.2020 um 17:01 schrieb Telium Technical Support: > I don't know if there was a prior email with more details, but.... > > Latency is as important as speed. Have you checked latency between your device and pop? What about QoS at your location, and does your ITSP support/respect QoS? That's a very good idea... Could you suggest me how can I check it? The Gateway is a

sshd also dies when certain other kinds of traffic is generated, such as `man pw' using the most pager[1], and many x11 apps such as emacs. However, it is stable when running simple x11 apps such as xeyes, and the link its self is stable -- a terminal will stay connected without issue for days, as long as not much happens in it. Also a sshfs connection dies immediately. ssh -Y karren gkrellm

Our users are experiencing some unacceptable delay when trying to have a conversation. The delay is so noticeable that they keep stepping on each others words and resort to calling the customers via cell phone. Here is the setup SDSL Connection (PPPoA) Speedtouch 610 SDSL Modem 3Com 2224PWR Plus Switch (phones on separate VLAN) 8 Cisco 796 Phones All connecting to a remote Asterisk Server. We

hi everyone I'm having a bit of a puzzle on one centos system, I have four interfaces: nm-team1 10.5.6.100 em1 192.168.2.17 em2 192.168.2.18 p3p3 172.25.12.222 I do: ping 10.5.6.17 -I em1 PING 10.5.6.17 (10.5.6.17) from 192.168.2.17 em1: 56(84) bytes of data. 64 bytes from 10.5.6.17: icmp_seq=1 ttl=64 time=0.367 ms the same for -I em2, for -I em1 and naturally for -I nm-team1 - all good.

Hallo, is there a Freepbx mailinglist? or can this be posted here? Best Regards,

I configured multiple isp (actually only multiple gw) according http://lartc.org/howto/lartc.rpdb.multiple-links.html. Now NAT (Internet) seems to work, both external interfaces work ( I didnt configure load balancing because I dont need it). However I have problem that I can not ping from NAT to public ip of my Linux box. Problem is that I can not connect from 192.168.1.0/24 network to services

I am having an extremely strange issue with a BL460c1 (G1) blade on a c7000 enclosure. I could not for the life of me get the machine to ping the gateway or any other blade on the same enclosure (yes, the subnet mask was correct & quadruple-checked); although pinging to the local IP works. I was almost convinced that it was a network or hardware issue; until I asked someone to try

This is strange behavior because as soon as I start mysqld with a clean error log, I get the following messages: 110720 21:38:47 [Note] /usr/libexec/mysqld: ready for connections. Version: '5.5.14-log' socket: '/var/lib/mysql/mysql.sock' port: 2500 MySQL Community Server (GPL) by Remi 110720 21:38:48 [Warning] Access denied for user

The web site for CentOS is not responding. I can ping it OK, but the web site is not responding to http requests from my browser. If the webmaster should happen to read this...

Hello all, I would like to connect two IPv4-only networks through global IPv6-only network with tinc. Could anyone tell me how to configure tinc.conf and the other config files? Thanks in advance, Ichiro Tinc: Discussion list about the tinc VPN daemon Archive: http://mail.nl.linux.org/lists/ Tinc site: http://tinc.nl.linux.org/

I was wondering is it possible to use the ices client with more that one soundcard under Centos Linux? I only want to stream one mono audio feed to icecast, but am already using the Line input of my sound card for something else, and the mic input might be far to sensitive. TIA Keith ----------------------------------------------------------- Websites: http://www.karsites.net

Ive just tried running that but I'm getting this error: [root at junglised ~]# rpm -ivh http://download.fedoraproject.org/pub/epel/5/i386/icecast-2.3.2-4.el5.i386.rpm Retrieving http://download.fedoraproject.org/pub/epel/5/i386/icecast-2.3.2-4.el5.i386.rpm error: skipping http://download.fedoraproject.org/pub/epel/5/i386/icecast-2.3.2-4.el5.i386.rpm - transfer failed - Unknown or

Hi ALL, Here is a weird problem comfusing me for a long time. i''v installed xen 4.0.1 with linux kernel 3.1.0-rc9+ Everything works fine except i cannot ping to the gateway in a PVM domU. i''v installed bridge-utils and brctl show like this bridge name bridge id STP enabled interfaces eth0 8000.00219b480d56 no

On Sun, 20 Feb 2011, Geoff Shang wrote: > To: Luis Barrett <getpaid00 at gmail.com> > From: Geoff Shang <geoff at QuiteLikely.com> > Subject: Re: [Icecast] Icecast start up script for icecast > > On Sun, 20 Feb 2011, Luis Barrett wrote: > >> We already have icecast install we our just trying to it >> started. In the icecast started script we need the

Hi originally I installed php 4 on centos 5.5 and then a few repos including the remi repo to upgrade to php5, which seems to upgrade/work without any issues. However when I make a change to the /etc/php.ini file it doesn't look like apache is seeing it, for example if I change the post_max_size and upload_max_file to 25M each apache still sees the default 2M. I also removed the /etc/php.ini

https://bugzilla.netfilter.org/show_bug.cgi?id=1127 Bug ID: 1127 Summary: running nft command creates lag for forwarded packets Product: nftables Version: unspecified Hardware: x86_64 OS: Gentoo Status: NEW Severity: major Priority: P5 Component: nft Assignee: pablo at

Hi all. me again! I've decided after some good advice from Sascha to go with a CentOS build. I've got icecast installed and running, however I'm having difficulty in finding a script that will start the icecast server on boot. Does anybody have one built, or know where I can find one? Ive kept everything pretty much standard in that the icecast server uses user "icecast"