similar to: i am not qble to install centos 6

Hi, I have been trying to install CentOS 5.4 on a Intel SR1530SHS, Intel S3200SH mainboard.. It has a 3 x 1TB sata hotswap drives with LSI software raid onboard. I had configured the LSI to have Sata0 and Sata1 with raid 1 and the third drive as a hotspare drive. Format the harddisk and installation was a breeze. The server rebooted into a blank screen and the cursor just keep blinking. Please

On my machine I have SATA0: HD SATA1: HD these two drives are set as RAID1 SATA2: HD extra SATA3: DVD SATA4: external USB disk Snip from dmesg shows the ATAPI device being detected. ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe400 irq 10 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe408 irq 10 ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATAPI: PIONEER BD-ROM

Hey fellas. I just installed samba and am having a problem. What I'm trying to achieve is hosting a file server for my lan. I don't want any login/password's to be used or any of that. The server box is running Debian linux and the clients are a mix of debian and winxp. On the server box I'm mounting the harddrives I want to share like this in /etc/fstab: /dev/sda1

the main advantage I know of for bios fake-raid is that the bios can boot off either of the two mirrored boot devices. usually if the sata0 device has failed, the BIOS isn't smart enough to boot from sata1 the only other reason is if you're running MS Windows desktop which can't do mirroring on its own On Mon, Nov 16, 2020 at 10:23 AM Jonathan Billings <billings at

Dear All, I have created a virtual high performance computing (HPC) cluster of 6 compute nodes with MPICH2 using Xen-based Fedora 11 Linux 64-bit paravirtualized (PV) domU guests. Dom0 is Fedora 11 Linux 64-bit. My Intel Desktop Board DQ45CB has a single onboard Gigabit LAN network adapter. I am able to bring up the ring of mpd on the set of 6 compute nodes. However, I am consistently

Dear All, I have created a virtual high performance computing (HPC) cluster of 6 compute nodes with MPICH2 using Xen-based Fedora 11 Linux 64-bit paravirtualized (PV) domU guests. Dom0 is Fedora 11 Linux 64-bit. My Intel Desktop Board DQ45CB has a single onboard Gigabit LAN network adapter. I am able to bring up the ring of mpd on the set of 6 compute nodes. However, I am consistently

This is my install profile F11.install name="FC11-G1S2" memory=500 disk = [''phy:/dev/sda3,0,w'' ] vif = [ ''bridge=eth0'' ] vfb = [ ''type=vnc,vncunused=1''] kernel = "/etc/xen/vm/vmlinuz.1" ramdisk = "/etc/xen/vm/initrd.img.1" vcpus=1 on_reboot = ''restart'' on_crash = ''restart''

Hi all, hope someone can help me out with this. Background Introduction I have a data set consisting of data collected from a questionnaire that I wish to validate. I have chosen to use confirmatory factor analysis to analyse this data set. Instrument The instrument consists of 11 subscales. There is a total of 68 items in the 11 subscales. Each item is scored on an integer scale between 1 to 4.

Hi All, I have several Xen virtual machines within logical volumes using LVM2. I did not use disk images for performance reasons. Conventionally, if I want to clone my virtual machines, I have to dd the LV to an image file. But this consumes a lot of time and harddisk space. So, instead of doing that, I want to use losetup and kpartx with my logical volumes, which contain operating systems of

Finally moved my home desktop from Fedora to CentOS. My spouse was unhappy with me upgrading from F9-->F10-->f11 etc and wanted something more stable. I built a second machine which is now running in parallel to the old F11 desktop. I moved my data (mail and files) from the F11 box to the CentOS 5.4 box. I used tar to move everything. Mail and files transferred A-OK...but the Evolution

Previous 2.6.31-rc8 kernel was built on F11 and installed with modules on F12. Current kernel has been built on F12 (2.6.31-0.204.rc9.fc12.x86_64) and installed on F12 before loading under Xen 3.4.1. Dmesg log looks similar to Michael Yuong''s ''rc7.git4''  kernel for F12. Boris. --- On Tue, 9/8/09, Boris Derzhavets <bderzhavets@yahoo.com> wrote: From: Boris

I have big .csv file. I would like to filter that file into a new table. For example, I have .csv file as below: f1 f2 f3 f4 f5 f6 f7 f9 f10 f11 t1 1 0 1 0 1 0 0 0 0 1 t2 1 0 0 0 0 1 1 1 1 1 t3 0 0 0 0 0 0 0 0 0 0 t4 1 0 0 0 1 0 0 0 0 0 t5 0 0 0 0 0 0 0 0 0 0 t6 0 0 0 0 0 0

Hello, (Apologies for length, wanted to get all the relevant detail in that I know of). I've been having a lot of trouble with some code for an inventory analysis problem I was doing, and finally came to the conclusion that it appears that choose() is returning incorrect values. Specifically: ------------- Browse[1]> nn [1] 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3

I post this to the mailing list, but perhaps is not the good place. I'm not subscribed, so I don't know if I'm going to get any reply, but please, tell me where to send patches. I attach two patches that correctly describes the new support for F11 and F12 in documentation but I have two more question to update documentation accordingly. In doc/syslinux.txt line 515, talking about

Hi all, I really appreciate all of you who are behind this great proyect. Im from Argentina (if you dont notice for my accent eheheh) Im trying to capture width the func Event.observe() the keys F3 and F11. Also the combinations for ALT and the arrows keys, and other combinations like: CTRL+X (cut) CTRL+C (copy) CTRL+V (paste) Using something like this: Code: Event.observe(window, keycode=122,

Hello: I'm trying to set up a small domain on my home network. ?The goal is to have a domain member server connect to my samba PDC using winbind for authentication against a tdbsam database. ?I've tried reading the official howto, and a few help sites, but I'm still having difficulty accomplishing my goal. ?I'm using Samba 3.3.2 on Fedora 11 for both computers. On the DMS,

When I try to virt-install a PV instance of F11, I''m getting an ''invalid kernel'' message, as if it''s not a Xen kernel. I have tried both the i386 and x86_64 versions. Is there any weirdness with this distro that I''m not aware of?

Are you expecting improvement after  09/15/2009 new-swiotlb commits ? 4097,6144, "No_dom0_mem_specified" don''t look to me to have any. Boris.   _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel

Hi, I have big .csv file. I would like to filter that file into a new table. For example, I have .csv file as below: f1 f2 f3 f4 f5 f6 f7 f9 f10 f11 t1 1 0 1 0 1 0 0 0 0 1 t2 1 0 0 0 0 1 1 1 1 1 t3 0 0 0 0 0 0 0 0 0 0 t4 1 0 0 0 1 0 0 0 0 0 t5 0 0 0 0 0 0 0 0 0 0 t6 0 0 0 0 0 0 0 0 0 0

Hi All, I just tried to create a DomU using the following method... (I normally use the Xen install kernel when I create CentOS domus, but when I tried that with the PXE image, that had the same effect as below). This is the first time I have created a Fedora domu in ages... years, even. virt-install \ --paravirt \ --name demo \ --ram 500 \