similar to: nouveau driver one centos 6

Hi, folks, Fully updated 7.2 system. I installed the correct proprietary NVidia driver (the user's expensive proprietary visualization software won't run with nouveau), I've put nouveau.modeset=0 rd.driver.blacklist=nouveau on the kernel line for grub2, and even yum removed the nouveau driver and built a new initrd... which won't boot, it seems to start and than does nothing,

On Thu, 26 Feb 2015 13:42:57 -0600, Ashley M. Kirchner <ashley at pcraft.com> wrote: > And after picking this back up this morning .... still no dice. I have > now > blacklisted the one module that would enumerate the add-in ethernet port > so > that is no longer an issue during the kickstart process, however the > following is now happening: > > - kickstart

I am trying to install 6.2 on a machine. I am using PXE as I have done so a number of times. My hard disk is being detected as sdb and not sda. My kickstart config is wanting it at sda. There are no other disks in the unit. It has and SD slot and an esata although BIOS does not appear to have a disable for either of those devices. Is there anyway to "force" the disk to sda ? or find

On Wed, 25 Feb 2015 16:45:04 -0600, Ashley M. Kirchner <ashley at pcraft.com> wrote: > Out of order meaning, it puts the additional ethernet card as eth0, with > the built-in ports as eth1 and eth2 respectively. WITHOUT the additional > card >installed, it puts the built-in ports as eth0 and eth1, which is > what I want it to do. The additional card should be eth2, at

On Wed, 25 Feb 2015 17:11:02 -0600, Ashley M. Kirchner <ashley at pcraft.com> wrote: > Add "rdblacklist=MODULE_NAME" to your append line in pxelinux.conf file. >> > > Trying that next. It'll have to wait till tomorrow as we're under a > serious > blizzard/snow event right now and I'd like to get home before all of hell > freezes over.

hi all, I am trying to get lm_sensors to work. did the yum install lm_sensors service lm_sensors start sensor -s and it says no sensors found. did lsmod | grep it87 and it87 57061 0 hwmon_vid 35905 1 it87 hwmon 36553 1 it87 i2c_isa 39105 1 it87 i2c_core 56129 5 it87,i2c_isa,i2c_dev,i2c_ec,i2c_piix4 Seems like

Ok you in Grub press tab and then add ?3? after the initrd entry ?. quiet?? yum remove xorg-x11-drv-nouveau And see if X11 come up with standard frambuffer? Disable nouveau complete from kernel if the upper not helps. nano /etc/modprobe.d/blacklist-nouveau.conf blacklist nouveau > Am 04.08.2017 um 12:52 schrieb wwp <subscript at free.fr>: > > Hello, > > > On Thu,

On 06/03/2019 23:03, Stephen John Smoogen wrote: > On Wed, 6 Mar 2019 at 17:50, Phil Perry <pperry at elrepo.org> wrote: >> >> On 06/03/2019 21:53, Pete Geenhuizen wrote: >>> >>> >>> On 03/06/2019 04:21 PM, Phil Perry wrote: >>>> On 06/03/2019 19:30, Pete Geenhuizen wrote: >>>>> >>>>> That is all good and

I have NOUVEAU driver disabled however its "showing" in my X log file. [ 140.086] (II) NVIDIA dlloader X Driver 390.59 Wed May 9 21:30:06 PDT 2018 [ 140.086] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs [ 140.086] (II) NOUVEAU driver [ 140.087] (II) NOUVEAU driver for NVIDIA chipset families : [ 140.087] RIVA TNT (NV04) [ 140.087] RIVA TNT2

I am testing the likelyhood of updating a couple RH9 systems to centos 5 386. I found at document that talked about updating to centos 4. steps being: 1.) backup 2.) rpm --import http://pubmirrors.reflected.net/centos/5/os/i386/RPM-GPG-KEY-centOS-5 rpm -Uvh --nodeps http://pubmirrors.reflected.net/centos/5/os/i386/CentOS/yum-3.0.5-1.el5.centos.5.noarch.rpm

On Sun, 3 Nov 2019, Jon LaBadie wrote: > Have you tried adding the Brother CUPS and/or generic LPR software? > > https://support.brother.com/g/b/downloadtop.aspx?c=us&lang=en&prod=hll2360dw_us I've been trying to folow directions, but no go. The bad ELF interpreter really through me for a loop: [root at localhost drv]# rpm -ihv --nodeps ~hennebry/Downloads/*.rpm

I have a line in my kickstart file (ksdevice) # Network information network --bootproto=dhcp --device=eth0 --onboot=on # Default network to boot ksdevice=eth0 # Auto reboot (to being next install faze) reboot However its still poping up and asking me eth0 or eth1 for install? Has this operation changed? Thanks, Jerry

I can do a yum update in my post kickstart (which is what I am doing now actually). However, I want to save network time at installations. If I copy down the files from centos/5.3/updates/x86_64/RPMS and place them in a directory local on my network, can I just "rpm -U /mnt/directory/updates/x86_64/RPMS*" in my post section? Assuming I have nfs mounted the directory of course...

I am install C7.5 on a nvidia unit and nvidia-detect tells me to use kmod-nvidia-390xx so I do the yum install and and after a long time I see this -> Processing Dependency: kernel(__drm_atomic_helper_crtc_duplicate_state) = 0xa5f3a170 for package: kmod-nvidia-390xx-390.87-2.el7_6.elrepo.x86_64 --> Processing Dependency: kernel(__drm_atomic_helper_crtc_destroy_state) = 0x00a9c70b for

Hi all, I have a kickstart file that works for /dev/sda. I now need to detect an HP server and use /dev/cciss instead of hard coded /dev/sda. How can I detect what the name of the device is and use /dev/cciss and not /dev/sda? Jerry

Is there a way that using kickstart I can tell it once its done install to go right ahead and do a "yum update" Thanks, Jerry

Seems like overnight every motherboard that worked with linux has DROPPED off the face of the earth. Every motherboard I looked at is using the realtek 8111 chipset and a northbridge that is not supported. Example: GIGABYTE GA-970A-DS3, does not work with linux I tried disabling the onboard NIC and using a PCI-E intel card I always use and that would not work either. The north or south bridge

On Wed, Nov 06, 2019 at 10:01:49AM -0600, Michael Hennebry wrote: > On Wed, 6 Nov 2019, Michael Hennebry wrote: > > >On Sun, 3 Nov 2019, Jon LaBadie wrote: > > > >>Have you tried adding the Brother CUPS and/or generic LPR software? > >> > >> https://support.brother.com/g/b/downloadtop.aspx?c=us&lang=en&prod=hll2360dw_us > > >

I tried to install alsa 1.0.19 on centos 5.3 64 - did not work - compile errors. I need to re-install alsa-lib and alsa-util . I dont want to do rpm -e first on those packages as dependcy is crazy. I know they were installed (rpm -qa | grep alsa tells me so) I just want to re-install ? How do I do that? Thanks, Jerry

To continue here with problems on this compaq v2000 laptop, I put kernel source on a USB disk and plugged it into the v2000. NOTHING IS recognized. I tried to manually mount the disk and nothing either... I thought USB was well established.... I thought trying to recompile the kernel for realtek support might get my networking going... I am stuck??? Jerry -------------- next part