similar to: issues when add driverdisk to centos5.6 using NFS method

Hi guys, I have my driverdisk created and the files are on a USB pendrive. How do I make the USB pendrive /dev/sdb and not /dev/sda??? I am wanting the installation to take place on sda and the driver disk to be sdb? My driver disk is a network driver disk, r8168. Jerry

I've previously used includes in CentOS 4.4 and they worked fine. But in CentOS 5.5, trying to specify a driver disk via an include does not work. If I instead specify it directly, it loads fine. When it fails (because it can't see the disk drive - needs the driver disk to see the hard disk), in Console 2 I can see that /tmp/drvdisk exists and has the line I wrote to it. I see nothing

On 10/2/19 9:47 PM, Jonathan Billings wrote: > On Oct 2, 2019, at 3:39 PM, Ljubomir Ljubojevic <centos at plnet.rs> wrote: >> Richard on CentOS-devel mailing list has similar problem but suggests it >> might be issue only with CentOS, he says he had to add the kernel line >> to make it work. >> Name of the tread is: >> [CentOS-devel] Booting CentOS 8 in a VM

Hi all, Some (then all) of our workstations were complaining about incorrect ACLs on GPOs and were unable to read the gpt.ini to apply the GPOs. So I did a sysvolcheck and sure enough I'd lost the ACLs when I moved our sysvol share to a new location on the server (whoops, mea culpa). I ran a sysvolreset which took a long time to return (some 5 minutes, please see my post on slow winbind

On 2019-12-02 10:00, Fabian Arrotin wrote: > On 02/12/2019 12:42, Alexandre Leonenko wrote: >> Hey guys, >> >> I'm stumped in how to add the kmod rpm to pxe install. I need it to be installed but also loaded during the install as well. >> The rpm in question is the 3w-9xxx from elrepo

SAS has DUD (Does not Use Derivatives)/Secant Method for nonlinear regression, does R offer this option for nonlinear regression? I have read the helpfile for nls() and could not find such option, any suggestion? Thanks, Derek [[alternative HTML version deleted]]

On Wed, Oct 2, 2019 at 4:10 PM Akemi Yagi <amyagi at gmail.com> wrote: > > On Wed, Oct 2, 2019 at 3:35 PM G?nther J. Niederwimmer <gjn at gjn.priv.at> wrote: > > > > > This Board have 2 Controller!? > > 00:1f.2 RAID bus controller: Intel Corporation C600/X79 series chipset SATA > > RAID Controller (rev 06) > > > > On this controller all

Could someone help me on the following: SAS has DUD (Does not Use Derivatives) for nonlinear regression. Does "R" has a similar capability? I am not good at derivatives and may get my derivative wrong before feeding it to a nonlinear regression procedure. Any help would be much appreciated. Liu Hancock Forest Management NZ Tokoroa, New Zealand DDI: 07-8850387 Mobile: 021-1576178

Hello A couple of days ago, I did the Spanish translation for ReleaseNotes CentOS 5.6 and I have some questions Right now, in the Spanish version we are using nice icons for "Notes". Would you like the same in the English and other translated versions ? (I know that is not important, just looks nice ;-) ) On many places we mention packages names or file names. I suggest use

We talked earlier on IRC about the Asus Eeepc I think the idea was to start a wiki page with at least informations regarding the Eeepc. So here it is : http://wiki.centos.org/HowTos/Laptops/Asus/Eeepc (not linked from the CentOS on Laptops wiki page yet though , still a draft ;-) ) I had to modify the installer initrd.img to include the atl2.ko module for the wired nic to install from my local

Hello fellow CentOS users, until now I was using CentOS 5.5 with php 5.3 through this file: # grep -v ^# /etc/yum.repos.d/CentOS-Testing.repo [c5-testing] name=CentOS-5 Testing baseurl=http://dev.centos.org/centos/$releasever/testing/$basearch/ enabled=1 gpgcheck=1 gpgkey=http://dev.centos.org/centos/RPM-GPG-KEY-CentOS-testing includepkgs=php* Today I have updated to CentOS 5.6 by running

hi I encounter problem when install debian squeeze domU on centos 5.6 dom0 environment dom0: centos 5.6 xen version: 3.4.3 domU : debian 6 squeeze I follow the instruction with howtoforge(http://www.howtoforge.com/installing-debian-squeeze-6.0-domu-on-centos-5.5-x86_64-dom0), after finishing the installation of debian squeeze, when I chroot the squeeze''s / and execute "apt-get

I've managed to install CentOS 5.1 on S5000PAL with fakeraid Intel Embedded Raid Technology II Raid1 (LSI chipset) with some help of kickstart declaration 'driverdisk --source=http://.../driver.img' Then I've had some problems with yum update - new kernel didn't know about megasr.ko. I've solved it with commands: cd /lib/modules/ cp 2.6.18-53.el5PAE/updates/megasr.ko

Hi, All SAS has DUD (Does not Use Derivatives)/Secant Method for nonlinear regression, does R offer this option for nonlinear regression? I have read the helpfile for nls() and could not find such option, any suggestion? Thanks, Derek [[alternative HTML version deleted]]

On Thu, Oct 10, 2019 at 9:04 AM Nux! <nux at li.nux.ro> wrote: > There was a recent thread about Redhat's removal of drivers from LSI > SAS2, it's probably the problem you are facing. > It can be worked around with the help of Elrepo repo. > > > https://lists.centos.org/pipermail/centos/2019-October/173682.html > > >

Hi, I just received in the mail my TDM04B card and put it in the computer, now the computer won't even show the video card bios or the post screen. From the digium website I could not find any specific requirements for the pci card, like 32 or 64 bit slot. The motherboard for the computer I put it in is an Asus A7V333 with PCI 2.2 compliant slots. I am thinking that maybe I just got a dud

Hi All, I went and bought a new headset, as I thought the old one,(almost 5yrs old), was no good. But, when trying to skype, I still can't be heard. I know the sound card worked before, although, it has been some time, since I mic'd anything. Anyone got any ideas, other than a possible dud sound card(socket)? Cheers. Mark Sargent.

What's the current wisdom on sync of sysvol to other (samba) DC's? [I should probably search, but I don't recall seeing discussion on sysvol sync details hit the list recently.] A quick search dud turn up this wiki article - is that current best-practice? https://wiki.samba.org/index.php/Rsync_based_SysVol_replication_workaround I'm running the Ubuntu 18.04 packaged Samba

Hi all, In my effort to get RCS archive access via smbmount, I stumbled across another interesting bit of behaviour with smbmount that could be playing a part - but does not involve RCS. Normally, under Linux - or any Unix - the following sequence of commands works: [cpratt@cpratt-desk2 ~/dud]$ ls -la total 3 drwxr-xr-x 2 cpratt users 1024 May 12 18:09 . drwx------ 32 cpratt users

See replies below On 16.11.2015 12:39, Rowland Penny wrote: > On 16/11/15 11:19, Viktor Trojanovic wrote: >> So I ran a samba-tool ntacl sysvolcheck, and the following error >> message came up: >> >> --------------------snip-------------------- >> ERROR(<class 'samba.provision.ProvisioningError'>): uncaught >> exception - ProvisioningError: