similar to: centos 6 boot and install on hp dl380 G4

Hi to all out there using HP DL380 G4 servers, i found a way to get the Digium TE410P with older firmware running on a HP-Compaq DL380 G4 Server! Here's the step-by-step description: 1. download the latest BIOS (in my case it was 4.04 from date: 06/02/2005) for the HP-Compaq DL380 G4 using the "Systems ROMPaq Firmware Upgrade Diskette for HP ProLiant DL480 G4 (P51) Servers" Link:

Was there any resolution on this I also have a TE410P in an box with an Intel E7501 chipset? -Vickers -------- Original Message -------- Subject: RE: [Asterisk-Users] Re: TE410P card in an HP-Compaq DL380 G4 server Date: Tue, 8 Feb 2005 11:13:24 +1030 From: Peter Childs <peter.childs@nec.com.au> Reply-To: Asterisk Users Mailing List - Non-Commercial Discussion

Hi, We are running FC5 test1 on some HP DL380 G4 servers with the stock xen and xen kernels supplied in FC5 release. We have 2 servers, one has 6GB of RAM the other 4GB. Both machines crash (lock up) on boot, I would have hoped to see 4GB of RAM and functional Xen in either case. Last message I see is related to PCI devices, I can try to capture the exact point of crash if it''s

will C5.3 support a SmartArray 6i 'out of box', or does it need drivers to boot from this? I am advising someone else remotely and don't have the hardware handy to test.

Hi, Has anyone had success using a TE410P card in an HP-Compaq DL380 G4 server? For me the card is detected fine, but the system just never sees an interrupt from the card. I've tried everything I can think of. The card definitely works. Its Fedora Core, but we also tried a stock 2.6.10 kernel. We tried with and without Hyperthreading, with "noapic", we disabled all the

Hi, I have a number of games which have multiple install CD's which I have in ISO format (Need for Speed: Underground 2, Sim City: Deluxe and a few others). When I attempt to install the game I use the following command to Mount the game CD: mount '/home/user/gamefolder/gameimage.iso' /mnt/iso1/ -t iso9660 -o ro,loop=/dev/loop0 This mounts the Game Image to /mnt/iso and from there I

This is an issue I've researched quite a bit on bug lists, and looked in the Syslinux Wiki for a way to do this, but haven't yet found a solution. 1) I have an existing Fedora 13 LiveCD which I burned to a CD and tested on a system without issue. 2) I then took that same ISO and dropped it in my pxelinux.cfg/default for being able to boot over the network. I made sure to extract the

Hi, all: I can't make my HP DL380 G2 servers to boot off local disk by using "default local" line in my PXE boot menu. For fully automated server setups, I have configured all my DL380 servers to always do PXE boot. By manipulating the default boot option in boot menu, I can control a server whether to install a new OS via kickstart or just boot off local disk. This scheme works

The HP DL380 G5 (like many rack servers) has no AMP Mate-n-Lok connector available to attach to a card that needs more power than the PCI bus can provide, like the TDM400P when FXS modules are used. HP has confirmed that there is no part they sell to give you such a connector, and Digium says their business edition folks got it to work, but only by doing nasty warranty-voiding things to the

Ho can I tell if a new xeon is 32 bit or 64 bit ? --

I am trying to install the net install version of 5.5 from an NFS share that I setup with freenas. I have fully functioning DNS (hosted on freebsd) and can mount the iso share on another centos box with the command mount nas.mydomain.com:/mnt/iso1 /mnt/iso1 on that machine. The nas host in question is a freenas which I believe is NFS 4. I can / will verify if someone would care to respond to this

greetings, for those of you in the know, may i have some assistance in helping to make better decisions in purchasing more used server toys to install CentOS on please? :-) in the Compaq Proliant Rackmount DL380 line, the one that looks like the older 1850R is called a G1 meaning Generation 1 right? and then the DL380 G2 is a redesign that is gray and just has 6 drive bays up front correct?

Is there a way to "offset" loop device usage with xen? For example, so it starts using devices after /dev/loop10 ? tnx, mario _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hi. I am trying to boot Xen 2.0.5 on an HP DL380 G3. It won''t. The box has an "HP Smart Array 5i" that when running normal Linux is handled by the CCISS driver. I suspect that this is what is not supported in the stock Xen kernel. Am I correct that I need to build a kernel from source ? According to http://lists.xensource.com/archives/html/xen-devel/2004-11/msg00709.html there

greetings pre centos install raid5 setup on a compaq dl380 is asking for stripe size. 16kb 32kb 64kb i am using one of the built in controllers and the machine has just a gig of ram and 4 18.2 gig 10,000 rpm drives machine will be an email server with simple web hosting as well. suggestions? thanks - rh -- Robert Hanson - Abba Communications Computer & Internet Services (509)

I have CentOS 6.x installed on a "HP ProLiant DL380 G5" server. It has eight 750GB drives in a hardware RAID6 array. Its acting as a host for a number of OpenVZ containers. Seems like every time I reboot this server which is not very often it sits for hours running a disk check or something on boot. The server is located 200+ miles away so its not very convenient to look at. Is

Good afternoon everyone, I''m trying to compile the xen 2.6.32.x pv_ops kernel on centos 5.5 with i386 quad core xeon system (HP DL380 G3). Having some issues during the kernel compile one of which related to intel agp so I just removed it from .config and didn''t come across it again. This error here has got me stumped though: drivers/built-in.o: In function

Hi All I will need to install CentOS 5.3 on HP DL380 R05 server with RAID-1 required. I am a newbie to CentOS / HP servers, need your help: - Does CentOS 5.3 work smoothly with HP DL380 server especially recognizing SAS disks and hardware RAID-1 features? From you experience, do you have to use HP Storage Drivers provided for RedHat Enterprise Linux 5? - How is HP

greetings i have a few dual P3 Compaq 1850R units and use compaq smartstart 5.5 on them before a CentOS 4 load i have acquired some dual P3 Compaq DL380 G1 i.e. Generation 1 units and am wondering which specific smartstart download i should be using for them from this URL below h18004.www1.hp.com/support/files/server/us/subscription/ssdownloads.asp would someone please share their experience

I''ve got a client demanding the use of HP DL380 G5''s, for various historical reasons, for a server room. I''m going nuts trying to figure out if the available CPU''s for them support VT, so I can avoid building them a separate Windows box. Unfortunately, the local web proxy is overloaded, so actually browsing the JavaScript/image loaded web pages for HP is