similar to: CentOS 5.5 does not recognise SAS drives with LSI 1068E Controller

Hi, I have a server with Supermicro X7DVL-3 (P9) motherboard, 16G ECC RAM and LSI SAS 1068e RAID controller. I installed CentOS 6.5 64bit on the machine without any problems, but after following the Xen setup steps at http://wiki.centos.org/HowTos/Xen/Xen4QuickStart which installed me the kernel 3.10.32-11.el6.centos.alt.x86_64, I encountered a problem: After "Starting certmonger

Hello, I'am using a LSI 1068e OEM version from Super Micro (see lspci). I was able to install a plain CentOS5 with the binary drivers I got from Super Micro. 06:00.0 SCSI storage controller: LSI Logic / Symbios Logic Unknown device 0059 (rev 04) Subsystem: Super Micro Computer Inc Unknown device a180 Flags: bus master, fast devsel, latency 0, IRQ 10 I/O ports at e000

Hi List I'm trying to update to the lastest kernel but I have a dirver that is not inculded in the distrubution, and I had to use the driver disk when installing centos 4.4 in the first place, The driver megasr .ko works fine with the installed kernel but I cannot find on for the updated kernel, any adive would be appreciated. without the updated driver there is a kernel panic on boot due to

I've managed to install CentOS 5.1 on S5000PAL with fakeraid Intel Embedded Raid Technology II Raid1 (LSI chipset) with some help of kickstart declaration 'driverdisk --source=http://.../driver.img' Then I've had some problems with yum update - new kernel didn't know about megasr.ko. I've solved it with commands: cd /lib/modules/ cp 2.6.18-53.el5PAE/updates/megasr.ko

Tearing our hair out on this one. Trying to install CentOS 5 x86_64 on a Supermicro X7DVL-E with 2 Xeon L5320 quad core CPUs, 3Ware SATA RAID controller in a mirrored setup and 4 GB of memory. Installation crashes at random places while copying the files. We've run memtest86 for 24 hours without any errors, replaced the RAID controller, motherboard and disks, but still no luck.

I'm trying to install CentOS 5.4 on a machine with a LSI SAS 1068E controller. I've googled all over the place and found a few different drivers for RHEL5 for it.. and tried a few of them.. Some will load, some complain that this isn't the correct version.. non of them work when it comes to showing Hard Drivers in the partition manager. The machine is a Supermicro SYS-6015V-M3

I have opened the case of the server and it's LSI card with FakeRaid !! What I have to do now as lspci shows it as intel cards?

On 7/30/2016 6:56 AM, Fawzy Ibrhim wrote: > # lspci -nn > 00:00.0 Host bridge [0600]: Intel Corporation 5520 I/O Hub to ESI Port [8086:3406] (rev 22) > 00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 22) > 00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 22) >

dmesg output has been pasted to http://paste.fedoraproject.org/409669/47144402/

On 8/17/2016 7:46 AM, Fawzy Ibrhim wrote: > There's no option in BIOS to disable the RAID mode; this is NEC servers !! huh. i've never seen anyone using the lsi megaraid firmware with intel SATA ports, so thats two things weird about NEC, kinda glad I don't ever see those. -- john r pierce, recycling bits in santa cruz

Greetings. HP claims RHEL 4 supports their servers with the Intel 3000 and 5000 chipsets. Has anyone had any trouble/success building machines that use this? For example, CentOS 4.4 on http://www.supermicro.com/products/system/1U/5015/SYS-5015M-T+.cfm Thx. Mike -------------- next part -------------- An HTML attachment was scrubbed... URL:

Are there any plans for Redhat/CentOS to implement the 2.6.18 Kernel which adds support for the Core 2 Duo chipsets, i.e. 965, 975, and 946? Thanks, -Drew -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20061006/efe217f2/attachment-0002.html>

One of my users complained that his Win2kSP2 complains that his password Is going to expire in 8 days. A while ago we changed from Win2k domain to a Samba 2.2.3a controlled domain. How do I disable the password expiration? I read the man pages and searched Google but couldn't find any hints about the issue. It almos seems like this expiration thing should not be happening at all...?

Is it possible to run php4 and php5 parallel in Centos4 somehow? If the parallel php5 could be installed from rpm also that would be great also. Regards, Peter

Is anybody here monitoring Dell SAS6/iR RAID health? I have a mix of CentOS 5.9 and 6.3 installs on the PE1950s. I'm finding drivers and Megaraid Storage Manager downloads via LSI's site, but I'd prefer not to install a bunch of crapware. All I need is the proper LSI daemon which exports info via SNMP. I've used check_sasraid_megaraid Nagios script [0] in the past for PERC5i and

I know there are a few 3Ware fans here and I was hoping to find some help. I just built a new server using a 3Ware 9550SX-4LP with four disks in raid 5. The array is fully initialized but I'm not getting the write performance I was hoping for -- only 40 to 45MB/Sec. 3Ware's site advertises 300MB/Sec writes using 8 disks on the PCI Express version of this card (the 9580 I think.)

On 11/16/2020 01:23 PM, Jonathan Billings wrote: > On Sun, Nov 15, 2020 at 07:49:09PM -0500, H wrote: >> I have been having some problems with hardware RAID 1 on the >> motherboard that I am running CentOS 7 on. After a BIOS upgrade of >> the system, I lost the RAID 1 setup and was no longer able to boot >> the system. > The Intel RST RAID (aka Intel Matrix RAID) is

I started to receive this kind of messages a few days ago on one of my servers: Message from syslogd@ at Mon Apr 29 08:02:55 2013 ... server1 kernel: EDAC MC0: UE row 0, channel-a= 0 channel-b= 1 labels "-": (Branch=0 DRAM-Bank=0 RDWR=Read RAS=0 CAS=0, UE Err=0x2 (Aliased Uncorrectable Non-Mirrored Demand Data ECC)) I've never had ECC memory to fail on me before, so now I am

Hi all, I would like to monitor the power consumption of my server. What I am looking for is: * a simple monitoring device that would measure the power consumption of 1 server * a way to get the consumption reading from that device to my centos server (via usb / wlan / whatever works) Any suggestions? Best, Peter

Hello. I'm setting up a computer that will run 'CentOS 6 server'. The MB is an Asus with a hw raid controller (Promise PDC-20276), which I want to use in RAID-1 mode. I noted (from a MB website) that it also needs a driver - which is probably why it's called a 'fakeraid'. So, I've been trying to determine if any recent kernels support this chip. Using