Displaying 20 results from an estimated 2000 matches similar to: "Kernel Errors Present"
2002 Feb 26
1
hardware error or fs corruption?
Would the following be symptoms of hardware problems or just a corrupt
fs? Will fsck tonight when a new power supply is going into the
machine.
Kernel: 2.4.17
Drive: Maxtor D740X-6L 80GB connected via HPT366
Feb 25 21:26:33 viper kernel: hde: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
Feb 25 21:26:33 viper kernel: hde: dma_intr: error=0x40 {
UncorrectableError },
2006 Dec 07
2
WARNING: Kernel Errors Present in logwatch
Hi, yesterday my linux machine gave me some smartd errors so i checked
the disk in another machine and it had defective sectors, I installed
a new hard disk on the original machine.
Today this is being reported in logwatch.
I have a Maxtor (200gig) as hda, a cdrom as hdc and another hard disk
that is used for storage as hdd. All plain IDE (not sata)
--------------------- Kernel Begin
2011 Jan 12
2
Kernel Errors Present...
Keith Roberts wrote:
> On Wed, 12 Jan 2011, compdoc wrote:
>
>> To: 'CentOS mailing list' <centos at centos.org>
>> From: compdoc <compdoc at hotrodpc.com>
>> Subject: Re: [CentOS] Kernel Errors Present
>>
>> Bad sectors get reallocated automatically, so you might
>> not find any with testing. You need to see how many have
>> been
2005 Nov 19
1
Bad disk?
Hi, I get the below from dmesg. The server seems to run fine, but it
does worry me. What should I do? Other than take a backup.. :-)
hda: dma_timer_expiry: dma status == 0x21
hda: DMA timeout error
hda: dma timeout error: status=0xd0 { Busy }
ide: failed opcode was: unknown
hda: DMA disabled
ide0: reset: success
hda: dma_timer_expiry: dma status == 0x21
hda: dma_intr: status=0x51 { DriveReady
2002 Jan 21
2
EXT3-fs error
Hello all.
I'm using RedHat 7.2 now and haven't have any problems until today. I
can still boot into the system at this time, but cannot load X at all.
I'm getting the following error message when I try to run fsck.
/contains a file system with errors, check forced.
Pass 1: Checking inodes, blocks and sizes
Error reading block 1277964 (Attempt to read block from filesystem
resulted
2004 Apr 30
0
disk problems or false alarm??
Hi,
I run hundreds of Redhat 8.0 boxes and Fedora Core 1 boxes, both
Operation systems boxes give me some trouble reporting disk errors like
the following (collected from /var/log/messages of each linux boxes by
my own script). And a "badblocks" command on some of the related hard
drive reports that failed sectors found, while others reports no,
false-positive. Any one can give me
2004 Jul 22
2
Ext3 filesystem aborting journal at random times (Maxtor 300GB disk)
Hi,
Sorry if this is an old and fixed issue but I can't really seem to find
a definitive explanation/fix to this in the mail lists. Ever since I
upgraded to FC2 my server randomly decides that it can no longer access
the disk and "aborts" the ext3 journal leaving it read-only as
expected. I've seen the same errors on other mail list, explained away
as disk or disk cable
2003 Jun 05
5
Hard Disk Failure
Hi All,
I had to reboot a machine as I lost the ssh connectivity to it. I could
ping to it though. On rebooting, the dmesg buffer showed the following
messsage
hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x40 { UncorrectableError }, CHS=7520/0/155, sector=1820440
end_request: I/O error, dev 16:02 (hdc), sector 1820440
hdc: dma_intr: status=0x51 { DriveReady
2009 Nov 24
3
hard drive errors
Hello
I seem to be getting some messages via email and in var/log/messages as
well, i think its a hard drive gone bad but was wondering if anyone has
seen something similar to this or would have some ideas if its fixable
or not, here are the messages
This email was generated by the smartd daemon running on:
host name: localhost.localdomain
DNS domain: localdomain
NIS domain: (none)
2007 Oct 17
2
SMART Prefailure Attribute messages
Hello,
My machine is running Software RAID 5 on /dev/hde1, /dev/hdg1,/dev/hdi1. I
noticed on the log that suddenly we are getting messages such as :
Oct 14 01:27:16 localhost smartd[4801]: Device: /dev/hde, SMART Prefailure
Attribute: 8 Seek_Time_Performance changed from 247 to 246
Oct 14 01:57:15 localhost smartd[4801]: Device: /dev/hde, SMART Prefailure
Attribute: 8 Seek_Time_Performance
2011 Jun 29
1
Kernel Errors
Checking my daily logwatch file, I see the following kernel
error:
--------------------- Kernel Begin ------------------------
WARNING: Kernel Errors Present
end_request: I/O error, dev fd0, sector ...: 1 Time(s)
---------------------- Kernel End -------------------------
The thing is I have not used a floppy disk for weeks.
Any ideas what's happening please?
Kind Regards,
2002 Apr 09
2
ext3 filesystem error message - need an interpretation
Hi, I'm having some serious problems diagnosing a hardware issue in my linux system.
The following error occurs intermittently. I have replaced hard drives and it is still occurring. I'm trying to determine if it's a device conflict, a problem with the motherboard or something else. Can anyone help?
hda: dma_intr: status=0x51 {DriveReady SeekComplete Error}
hda: dma_intr: 0x40
2005 Aug 03
2
hda dma seek errors
I am getting occasional seek error on my boot drive.
The messages are as follows:
pshda: dma_intr: status = 0x51 { Drive ReadySeekComplete Error }
hda: dma_intr: error= 0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
Everything seems to be working fine but these errors do
have me concerned.
The last time they occurred I was created a fairly large cpio
backup file in the
2004 Nov 03
2
Help! how to infer failed fileName|inode from LBA sector for ext3 on Fedora Linux??
Hi,
I have an ext3 file system question for a while: How to obtain failed
file (inode) from LBA section reported by Linux kernel? The following
lines are a simple example:
...
FCbox1: Nov 1 04:08:59 FCbox1 kernel: hda: dma_intr: status=0x51 {
DriveReady SeekComplete Error }
FCbox1: Nov 1 04:08:59 FCbox1 kernel: hda: dma_intr: error=0x40 {
UncorrectableError }, LBAsect=165843413, high=9,
2002 Nov 17
1
error message - bad hard drive?
Hi
upon booting this morning (Redhat 8.0), i received this error message
Nov 17 02:55:07 jaguar kernel: EXT3-fs error (device ide0(3,3)):
ext3_find_entry: bad entry in directory #1111941: inode out of bounds -
offset=36, inode=537868397, rec_len=12, name_len=4
I've also had these messages too
Nov 3 20:25:42 jaguar kernel: hda: dma_intr: error=0x84 {
DriveStatusError BadCRC }
Nov 3
2007 Apr 11
2
Unable to figure out extlinux
OK, been perusing the archives and Google, but can't find what I want.
I'm building up a 512 MB compact flash using the CLFS directions to
build the filesystem. That works great, but I would like to use extlinux
to make the cflash bootable on my little SBC. However, to date, no dice.
Attached is my extlinux.conf file and the steps I have used to make this
work.
Initially I tried to
2004 May 20
2
HD Partition Lost??
Help!
I am running FC1, with a maxtor 160GB HD installed. Drive is only about a
month old. I had just finished moving data from an older HD that was making
some funny sounds and throwing some random errors. All was well. Last night
we lost power for several hours and 1 machine's UPS/shutdown system didn't
power down the workstation. The other 7 in our office did fine. The power
2005 Aug 05
2
FS problems on Centos4 LVM
I was creating some directories (mkdir xxxx) while cd'ed to a mounted
LV. The first couple of directories were created but subsequent
attempts give the following error:
#mkdir: cannot create directory `xxxxx': Input/output error
The contents of /var/log/messages shows this:
Aug 5 10:48:57 inet05 kernel: hda: dma_intr: status=0x51 {
DriveReady SeekComplete Error }
Aug 5 10:48:57
2007 Oct 18
1
Vista performance (uggh)
Issue: Vista reads slowly from a samba server. This appears to pop up
periodically here and elsewhere.
My samba.conf file has:
[homes]
...
vfs objects = readahead
As suggested elsewhere.
Writes are approximately 17-18MB/s which is acceptable. Reads are in
the 8MB/s range which is appalingly slow. Using linux smbclient and
windows XP clients I can read at 25+MB/s. I've enabled vfs
2005 May 11
3
Software RAID on Centos 4 - new issue
OK, I have managed to get software RAID 1 running on my wonderful Proliant
server but now have two challenges:
1) Fresh after an OS install and reboot, the RAID array starts to do its
stuff but straight away (as part of the boot messages) I am told that the
second disk is 'not ready for command' and the system hangs as soon as
resyncing starts. I think this is fixed by adding an hdparm