similar to: PE850 Interrupt conflicts on CentOS 5 and onboard ethernet and pci-e serial

anyone know how to force network cards talk at gig speeds when all it wants to do is establish a connection at 100mbits root at host1 [/backup/cpbackup/daily]# mii-tool eth0: negotiated 100baseTx-FD, link ok eth1: negotiated 100baseTx-FD flow-control, link ok 01:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express (rev 11) Subsystem: Broadcom

I''m using Rails (3.0.3) and have the following code in initializers/inflections.rb ActiveSupport::Inflector.inflections do |inflect| inflect.irregular(''nursery'', ''nurseries'') end From the console I''m getting: "nursery".pluralize => "nurseries" "nurseries".singularize => "nurseries" I should be

Any dedicated server hosts here offering Intel-VT-based servers? I''m thinking about standing up two Xen hosts in two different geographical locations and it''d be great if I could run either Windows or Linux on an Intel-VT-based processor (rather than using VMware on a standard processor). Might like to run either Debian, Ubuntu or SuSE as the Dom0 OS. CD

Hello, I have a problem getting the domain 0 (dom0) of xen running with SuSE 10. I have a SuSE 10 installation, which runs. When I switch to the xen kernel, the network does not work any more. Also the serial console does not work any more. If I login to the PC through (a very lousy) KVM, I can do local stuff, but the network does not work. (Ok, I can ping my own IP Address.) e.g. nslookup

Provides a mechanism to generate ip addresses for static networks and prefill the 'ip address' fields of the host and vm networking forms w/ the first suggested ip. --- src/app/controllers/vm_controller.rb | 2 +- src/app/models/ip_address.rb | 52 +++++++++++++++++++++++++++++++++ src/app/models/network.rb | 11 +++++++ src/app/models/physical_network.rb |

Frontend and backend changes needed to implement http://ovirt.org/page/Networking_UX#Option_3 --- src/app/controllers/host_controller.rb | 38 ++- src/app/services/host_service.rb | 35 ++ src/app/views/host/edit_network.rhtml | 593 ++++++++++++++++++++++++++++---- src/public/stylesheets/components.css | 76 ++++ 4 files changed, 676 insertions(+), 66 deletions(-) diff --git

Graham Bentley wrote: > Recently swapped out my Sony for a HP DAT and > got this first time in dmesg > > (sa0:ahc0:0:6:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0 0 0 0 0 > (sa0:ahc0:0:6:0): CAM Status: SCSI Status Error > (sa0:ahc0:0:6:0): SCSI Status: Check Condition > (sa0:ahc0:0:6:0): UNIT ATTENTION asc:28,0 > (sa0:ahc0:0:6:0): Not ready to ready change, medium may

Package: xen-utils-common Version: 3.2.0-2 Followup-For: Bug #511579 My system is a Dell PowerEdge SC1435. As most of the servers of this category, it comes with 2 network interfaces. Both based on a Broadcom Corporation NetXtreme BCM5721 chip, set up via tg3 module. Does multiple NIC's triggers the bug? This link helped me a lot: https://systemausfall.org/wikis/howto/XenUpgrade3.2 --

I have an IBM System x 3250 that successfully boots using the standard kernel (2.6.18-8.1.10.el5) but fails to boot with the xen kernel. The kernel appears to fail when it attempts to initialize the driver for the onboard SAS controller (LSI Logic / Symbios Logic SAS1064E PCI-Express Fusion-MPT SAS). Can anyone provide any advice? Here's the relevant info. Please let me know if any other

Hello, I use Julian Anastasov ''routes'' (to be more specific: static_routes, alt_routes and nf_reroute) patches on a 2.4.32 kernel. On the same host I run IPSec. I have discovered after a few hours of networking problems that, when IPSec is enabled on that patched kernel, inspecting packets with tcpdump while arping-ing a host from a network physically connected to this

I have installed two 4-port serial cards (http://www.startech.com/ Product/ItemDetail.aspx?productid=PCI4S550&c=US) on a CentOS 4.4 system. The hardware appears to be recognized correctly, as kudzu added 2 entries to /etc/sysconfig/hwconf and lscpi shows both cards (output of lspci -vv for both cards included at the end of this email): # lspci 00:00.0 Host bridge: Intel Corporation

[This email is either empty or too large to be displayed at this time]

Hi Does anyone know how to get the PC speaker working with CentOS 5.1 & Xen 3.1? [root@gimbli ~]# uname -a Linux gimbli.softdux.com 2.6.18-53.1.13.el5xen #1 SMP Tue Feb 12 13:33:07 EST 2008 x86_64 x86_64 x86_64 GNU/Linux Xen version 3.1.0-53.1.13.el5 (mockbuild@) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) Tue Feb 12 12:55:35 EST 2008 Latest ChangeSet: unavailable -- Kind

I've been checking out this and like the looks of it. http://www.tyan.com/products/html/gt24b2891.html I was told the onboard SATA RAID controller can only be used by windows. However, others have told me that there is no problem using it with linux. Anyone used the Tyan Transport GT24 (TYAN Thunder K8SRE s2891 motherboard)? Good choice for a CentOS server? Thanks, Josh

I have a Supermicro SuperServer 6025B-3V with their X7DB3 mobo. It has an onboard Adaptec SAS RAID controller and has been configured as a RAID1 with two Seagate Cheetah 15k.4 disks. Original attempts at installing CentOS4.4 x86_64 appeared to load the aic94xx driver, but then reported something like "No hard drives found...". I grabbed the x86_64 aacraid driver disk from Adaptec

On 23/09/2019 13:10, Nicolas Kovacs wrote: > Hi, > > I have a CentOS 7 desktop client installed on an old Dell Optiplex > computer with an Intel video card integrated into the motherboard. The > card has a single VGA connector, and the 19" monitor is connected to it. > > I wonder how I could connect a video projector to this computer while > keeping the monitor, in a

Hi! I have a Asus P4C800 Deluxe motherboard with an onboard sound card. According to the mb. spec it's a ADI AD1985 SoundMAX 6-channel CODEC, AC'97 chipset. I'm running FreeBSD 5.1R and have device pcm in my kernconf. The only thing I see in dmesg output related to the card is pci0: <multimedia, audio> at device 31.5 (no driver attached) Full dmesg output available

Howdy all, Any recommendation as to the right way to config X. Last time I did was using X86Setup back in OpenBSD 2.7 days. What's the Xorg tool? How do I invoke it? Looks like I just need to fix the ranges, maybe they mean sync vert & horiz or something. Or should I be typing gdm instead of startx? Any advice? -below are some errors, infos, although the dmesg didn't pipe out

CentOS-6.2 We have a dedicated CentOS-5.7 host used for fax reception and transmission that we wish to move to a CentOS-6.2 virtual guest instance. The CentOS-6.2 virtual host has a 4-port serial card installed. lspci -v tshows this this: 03:00.0 Serial controller: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART) function 0 (Uart) (prog-if 06 [16950]) Subsystem: Oxford

hi, I'm trying for some time to get a few games to run and it seems like Wine wants to use my onboard graphic card (ATI HD 3200) instead of my ATI HD 5670. The reason i think that is a) sometimes when launching Starcraft 2 it tells me that the driver for my graphics card HD3200 is out of date and that i should update, and b) i found this when i tried launching Natural Selection 2.: > Build