similar to: Router for SOHO network - hardware considerations

Hi, I've just installed asterisk 1.2.1 on my openwrt distro ( I own a WRT54GL by Linksys ) . No problem by now, but I can see that my 3 snom 320, once they started they send subscriptions to asterisk, and I can see that running: sip show subscriptions But, after one hour about, OR when I do asterisk reload , asterisk losts all th snom subscriptions. Someone can help me please? Thanks

I'm running a Linksys WRT54GL router from my CentOS-7 home server. Every now and then (maybe once every 2 days) the router's WiFi cuts out, and I've found no way to solve this except to disconnect the power from the router, wait 10 seconds and then re-connect. This always works. The router is running under dd-wrt. My question is - which makes it a tiny bit CentOS-related - does anyone

Hello, Did anyone succeeded in installing Asterisk on OpenWRT system. pls help. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090724/aee7ee12/attachment.htm

Hello to everybody, Sorry if my english isn?t very good. I need pass 802.1q through a VPN between two offices. I have mounted a WRT54GL, with OpenWRT firmware, conected to a switch trunk port in both offices. In the switch of the first office I have created five tagged VLANs and I need pass these VLAN to the second offices where it has created it too. Can I do this with Tinc in HUB/Switch

Hi all, We have put together a firmware for a range of inexpensive routers. It has been configured to provide optimum VoIP performance. We have internally tested it for number of months and it looks very good. You should be able to run it easily with 20+ phones on local network ( we still did not hit the upper limit ) assuming that you have bandwidth. Your VoIP will get prioritized over other

Anyone got this working over a LAN under CentOS? The instructions claim it is easy to connect after pressing the WPS button on printer and router. Sadly, I don't see a WPS button on my Linksys WRT54GL router. When I press the WPS button on the printer the WiFi icon flashes, but I don't see any attempt to connect in /var/log/messages on my CentOS-5.5 server. Any advice or suggestions

I have a curious problem with an old WRT54GL router, which I use as a WiFi access point on my LAN: Internet->ADSL modem->CentOS-7 computer->WRT54GL router The router has always had a slight problem of losing connection every so often - it used to be every couple of days, but recently it has become much more often. My cure was always to disconnect the power from the router for 10

I'm running a CentOS-5.6 server, which in general runs perfectly. My setting is possibly a little unusual: ADSL -> Billion 5200S RC modem/router -> CentOS-5.6 HP MicroServer -> Linksys WRT54GL router . My daughter is just visiting me, and she has to contact her job using AT&T VPN on her laptop under Windows XP. Unfortunately this does not work on my system when connected to

I have a LinkSys WRT54GL router, which I would like to attach to my CentOS-5.6 server, to set up a LAN 192.168.2.* . The server is attached to the internet through a Billion modem/router which has a single ethernet outlet. The instructions for the LinkSys router assume that it is being attached directly to an ADSL modem. But for various reasons I want everything to go through my server. I wonder

hi all, I''m writing not for technical problems but for a simple question. Do You know if there is a distro which is ready for traffic shaping etc. ''out of the box''? I mean a distro which does not require patching the kernel and/or iptables and/or installing from source etc. and gives the user most of the tools needed (imq, ipp2p, l7filter and so on). many thanks

I need to get a second ethernet card for my HP Proliant CentOS server, to attach a LinkSys WRT54GL router to. I see that there are many Realtek RTL8169S gigabit cards going for a song on eBay. Is anyone using one of these under CentOS? Do they work OK? (I used to have a couple of Realtek cards - not gigabit - and they worked fine.) Or does anyone have a strong recommendation for other cards? Any

Hi list, Can anyone who has successfully ran asterisk on a home router please give me the modell number as well as how they did it ? Thanks. Dovid -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061207/92c7f946/attachment.htm

Setup: Office A: router: Linksys WRT54GS running SVEASOFT Alchemy-pre7a v3.37.6.8sv Asterisk: v.1.2.4 static IP Office B: router: Linksys WRT54GL running Linksys firmware v4.30.2 Asterisk: v.1.2.7.1 dynamic IP (using dyndns name) Office A is set up with refresh dns and cron job for iax2 reload every 5 minutes. It rarely looses connection to Office B. Surprisingly, Office B is the one loosing

Hi, all. I've used the perl/AGI interface, and... well, I found it kind of hokey. Granted, this was in 1.2 days -- perhaps things have changed. Regardless, I guess I have two questions: 1) Has the Perl/AGI "binding" improved since then? 2) Is there any chance of a "real" API for Perl? Thanks much! -Ken -- This message has been scanned for viruses and dangerous

I caught a thread the other day concerning Astricon and users embedding Asterisk on a Linksys or Netgear broadband router. I lost track of the email thread, if anyone is presently working with this scenario please shoot me an email. Thanks Cory Andrews ++++++++++++++++++ VoIPSupply.com PBXSelect.com ++++++++++++++++++ 454 Sonwil Drive Buffalo, NY 14225 voice direct - 716.250.3402 fax -

I just bought two new Linksys WRT54G routers. Sveasoft has loaded Linux on this router and included a bunch of Linux tools, one of which is Bandwidth Management. The QoS aspect of this is supposed to be much more granular than the previous solution (Wonder Shaper). I have not been able to find any suggestions for how to impliment QoS (Bandwidth Management) using the web interface of Alchemy.

I have multiple locations running * where all the phone are on their own lan and all the data is on a separate lan. The problem is they are sharing the same dsl connection. The locations are IAX2 trunked together, but it only takes one data down/up load to just kill the voice. What I am looking for is a small switch with QoS that I can stick in ahead of the dsl modem. Plug in one connection from

I'd like to survey those on-list who actually use wifi SIP handsets. What type of wifi access point do you use? Are you happy with it? I presently use some older Linksys WAP54G APs. I'd like to replace these but in doing so I'd like to be moving in a VOIP friendly direction. I've yet to find a handset that I'd buy in quantity, but my last round of access points lasted >4

I'm running CentOS-6 on an HP MicroServer with a Billion 5200S modem/router connecting to the internet. I'm running the standard CentOS-6 firewall on the server. (1) I can open port 22 on the Billion, allowing me to ssh in from outside. But for some reason I cannot ping the same address from outside. (I can ping it internally.) Why is this? I'm not sure if the problem lies with the

Is there anyone who has successfully put together a "high-powered" mini-itx ZFS box that would be willing to post their system specs? I''m eyeballing the KI690-AM2... http://www.albatron.com.tw/english/product/mb/pro_detail.asp?rlink=Overview&no=239 ...but am having a difficult time locating it and a suitable case currently. I was in negotiations with a hardware source,