Displaying 20 results from an estimated 11000 matches similar to: "CentOS 5.4 and 5.5 UPS EATON/MGE"
2011 Jul 28
1
can't connect to an Eaton Powerware 9155 over a usb-serial adapter
hello everyone,
I've been testing the NUT solution as opposed to the undocumented LanSafe
application to control my Eaton UPS.
I am on a Slackware 13.37 system with a 2.6.37.6 kernel. NUT version is
2.4.3 .
I installed the tarball by compiling it directly on my system (as a
slackbuild package).
The UPS is an Eaton Powerware 9155, but I don't know how to obtain the
manufacturing date. The
2014 Feb 02
2
Powerware (Eaton) Prestige 9 UPS
I noted some correspondence from several years back about supporting
this device with bcmxcp, and the problems therein. Since I have one of
these UPS units, still going strong, and the Eaton LanSafe stuff has
finally caused me enough grief to abandon it, I figured I'd take a look
at this.
The issue is not that bad - the bcmxcp driver query of the topology
block (2 bytes!) is returning
2010 Jan 22
1
Eaton / MGE Ellipse MAX 600 USBS and nut
Hi there,
I've replaced yesterday my old UPS with a brand new "Eaton Ellipse MAX 600
USBS".
I've choosed the Eaton (previously MGE) both because I've always been
extremely satisfied with MGE UPSes of all kinds at work, and because of the
involvement of MGE (with Arnaud) in nut development, which made me quite sure
that I would have no trouble with an Eaton (MGE) UPS and
2019 Nov 07
0
NUT doesn't work with Eaton 9PX with Network-MS - "Unknown UPS"
Hi,
I'm trying to setup a Raspberry Pi to monitor our UPSes, and gracefully
shutdown our servers, as per this guide:
https://openschoolsolutions.org/shutdown-servers-case-power-failure%e2%80%8a-%e2%80%8aups-nut-co/
https://hackernoon.com/how-to-shutdown-your-servers-in-case-of-power-failure-ups-nut-co-34d22a08e92
This is on Raspbian 10, running on a Raspberry Pi.
NUT is version 2.7.4 and
2016 May 01
0
New UPS Support: Eaton 5S 1000
On Apr 26, 2016, at 11:56 AM, Ken Marsh <ken.marsh at sparkpost.com> wrote:
>
>
> I've used NUT successfully for monitoring many different brands of UPS, but this one has me stumped. It has the same manufacturer ID and Product ID as older supported MGE-type Eaton UPS's, but has trouble talking. I tried Ubuntu's repo NUT
Which release of Ubuntu, and which version of
2011 Nov 17
3
UPS MGE serial cable over network.
Hi,
I'm forwarding your mail to the NUT list, because of a lack of time,
and also since some others (Charles) already looked at this issue IIRC
(related to the development branch 'netport').
cheers,
Arnaud
--
Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
Debian Developer -
2009 Dec 30
2
usbhid-ups disconnects with Eaton Ellipse 1000S
My UPS is a Eaton Ellipse 1000S (But its identified as MGE Ellipse
0463:ffff).
I have been using the usb interface with the usbhid-ups driver, but I
found that sometimes (too much times) the driver doesn't respond and NUT
doesn't receive changes nor notifications from the UPS.
The kernel lose the connections with USB device, in the kernel logs
appears:
Dec 30 11:24:12 rei kernel:
2013 Feb 07
1
Problem with NUT and an Eaton 5PX UPS, usbhid-ups won't start
Hello,
I have trouble connecting to an Eaton 5PX UPS via the usbhid-ups
driver. It is supposed to be fully working according to the
compatibility list (support level 5).
OS: A fresh Debian stable install. Then changed the apt source to
unstable and did "aptitute update" and "aptitude install nut". Nothing
else. I did that, because the "unstable" package is a more
2013 Sep 10
1
[HCL] Eaton 5S1500LCD supported by usbhid-ups
Device Manufacturer: Eaton
Device Name: 5S1500LCD
----------------------------------------------------------
upsc output:
battery.charge: 100
battery.charge.low: 20
battery.runtime: 3515
battery.type: PbAc
device.mfr: EATON
device.model: Ellipse PRO 1500
device.serial: 0000000000
device.type: ups
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
2013 Sep 10
1
[HCL] Eaton 5S1500LCD supported by usbhid-ups
Device Manufacturer: Eaton
Device Name: 5S1500LCD
----------------------------------------------------------
upsc output:
battery.charge: 100
battery.charge.low: 20
battery.runtime: 3515
battery.type: PbAc
device.mfr: EATON
device.model: Ellipse PRO 1500
device.serial: 0000000000
device.type: ups
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
2014 Dec 20
1
Help on UPS Eaton 5E 850i USB
I was unable to setup |nut| on a server for the UPS Eaton 5E with USB
connection. All results what did I get was that driver is not running
and UPS is not recognized. What kind of driver is suitable for me and
what kind of settings? Unit is Eaton 5E.
result of |$ lsusb -v|
|Bus 004 Device 007: ID 0463:ffff MGE UPS Systems UPS
Device Descriptor:
bLength 18
bDescriptorType
2024 Jan 20
0
Experiences With NUT Eaton & Cyberpower UPS
I watched the recent discussions of "issues" with an Eaton Ellipse UPS with some interest.
I use the US version of that UPS, the Ellipse Pro 1500 in my case. I had not encountered many of the issues recounted in those discussions. The Login Failure message is not unique to that UPS as I have seen it with my Cyberpower units. The polling setting also had me wondering as I have never had
2016 May 02
2
New UPS Support: Eaton 5S 1000
Hi,
Thank you for taking a look at this. This is 13.10. I realize Saucy is no
longer supported. This system is slated for replacement, but in the
meantime I'm responsible for it.
The repo version of nut was 2.6.4-2.3ubuntu2. Installing it was useful as
it gave me the nut user and group. The compiled version errors out whether
or not the repo version is installed.
I just did strace.
2016 Apr 26
3
New UPS Support: Eaton 5S 1000
I've used NUT successfully for monitoring many different brands of UPS, but
this one has me stumped. It has the same manufacturer ID and Product ID as
older supported MGE-type Eaton UPS's, but has trouble talking. I tried
Ubuntu's repo NUT, and it logs a Connecting to UPS message every few
seconds forever, but never really succeeds (or says it fails). Different
failure mode after
2018 Oct 09
0
NUT driver usbhid-ups for EATON 5E650iUSB does not work on CENTOS 6.1
OS name and version,
*CentOS release 6.10 (Final) Linux 2.6.32-754.3.5.el6.centos.plus.x86_64 #1
SMP Wed Aug 15 02:28:38 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux*
exact NUT version
Name : nut
Arch : x86_64
Version : 2.6.5
Release : 2.el6
Size : 4.2 M
Repo : installed
>From repo : epel
Summary : Network UPS Tools
URL :
2015 Jul 27
0
[HCL] Eaton 5E1100i supported by usbhid-ups
Device manufacturer and name: *Eaton 5E 1100i USB*
*upsc eaton5e*
Init SSL without certificate database
eaton5e
root at eger:/home/siposg# upsc eaton5e
Init SSL without certificate database
battery.charge: 100
battery.runtime: 3160
battery.type: PbAc
device.mfr: EATON
device.model: 5E 1100i
device.type: ups
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
2013 Feb 07
0
nut-2.6.5: ups.timer.start problem with EATON Protection Station 650
Hi,
I have successfully configured Nut to work with EATON PS 650: system
detects low battery, initiates shutdown, waits for UPS to switch power off.
However, when power is restored, UPS immediately powers on all power plugs
independently from ups.timer.start setting.
upsc reports "ups.timer.start" variable availability which is set to 0.
upsrw reports "ups.delay.start"
2023 Mar 09
1
Question on EATON UPS
Hi NUT Users,
One of my APC UPS is having battery issue and apparently we cannot change battery in that UPS. (not super green?)
I have purchased an EATON UPS and added the ref in ups.conf
When restarting the driver, I got this error
> 0.030612 [D2] Checking device 2 of 10 (0463/FFFF)
> 0.287659 [D2] - VendorID: 0463
> 0.287853 [D2] - ProductID: ffff
>
2024 Jan 19
1
NUT and Eaton UPS produce a lot of error messages
Hello
I recently bought a small UPS by Eaton (Ellipse ECO 800) in order to prevent my
btrfs-fileserver (running Debian 12 Bookworm 12.4 from shutting down
abruptly while writing
something important during a power loss. I am using the version
2.8.0.7 provided by Debian.
I have found very gooddocumentation on how to set up the UPS and the
services on the server
connected to it. Unfortunately
2020 Jul 30
0
Eaton 5E 2000i - incorrect values reported by usbhid-ups
Hi,
I've recently bought the UPS in subject to support a small load (around
60-80W). I've installed nut and did the basic configuration and confirmed
basic communication. At that stage I did not configure upsmon, but simply
was monitoring the values.
I carried out a test to see how long the setup would last - according to
the values reported via upsc - it should have been around 45mins.