similar to: release of 5.5? (filesystem troubles)

hi, I'm using the SCD-20 solar controller from IVT Gmbh in combination with a 230Ah battery and a photovoltaic panel to power a small server based on an Intel ATOM N270 CPU. the controller is (will be) connected to the server via RS232 (1200 8n1) and works like this: - if the battery voltage drops below 12V, a warning LED is switched on - if the battery voltage drops below 10.5V, the load

I am looking for pros and cons on the Intel Atom cpu. Has anybody been using these in production? I am looking at an Atom D510 (dual core 1.6GHz, 1M cache) to run maybe 25 to 30 extensions, 4 or 5 calls at once(maybe as high as 7 simultaneous calls), g729 all the way through except voicemail will be wav format for email purposes(requirement). I will be tying 3 of these together to route

guys, A bit off topic here, but since this issue already has a history here: serial connection to the SCD, the never ending story ... - the intel D945GSEJT mainboard (ICH7) has two serial ports with onboard connectors which require a ribon cable to the external DB9 connectors in the case. I tested 5 cables, but none works. whereas I'm not sure if it is a cable problem. this is what dmesg

I have an odd setup at present, because I''m testing while still building my machine. It''s an Intel Atom D510 mobo running snv_134 2GB RAM with 2 SATA drives (AHCI): 1: Samsung 250GB old laptop drive 2: WD Green 1.5TB drive (idle3 turned off) Ultimately, it will be a time machine backup for my Mac laptop. So I have installed Netatalk 2.1.1 which is working great. Read

Greetings, I have a quad port Tormenta 2 PCI card (uses the tor2 driver), which I have been successfully using for some time on an older, power-hungry Intel machine. I recently moved it to a newer machine with an Intel Atom D510 CPU in an effort to save on energy costs, but I cannot seem to get it to work there. Both machines are running Ubuntu 13.10 x64, with DAHDI support coming from the

(a) Mark (mhr) suggested I buy a bare bones box, when I reported the problem with the mainboard in this Dell Dimension 2400 box. Possibly I can have the mainboard repaired (and the PSU, if it is also having problems), and if so, I will give this one to my Stepson and go the bare bones box route and have a more powerful box for myself. I looked at two (2) very low end Desktop mainboards in the

https://bugs.freedesktop.org/show_bug.cgi?id=63101 Priority: medium Bug ID: 63101 Assignee: nouveau at lists.freedesktop.org Summary: [Ubuntu 10.04.4 LTS 32-bit] NVIDIA GeForce 7300 GT AGP graphics card will not display any text characters on VIA Technologies Apollo MVP3-based mainboard QA Contact:

I installed CentOS-5 on a test machine, a P4 1.8 Ghz Compaq Evo D510 series. This was a clean install onto a new disk drive and everything went well. After updating with YUM and installing Postgresql, Rails for Ruby, Firefox-2 and Thunderbird I shutdown and restarted the system several times without incident. I then pulled the CD-ROM and replaced it with an LG-DVD DVD-RAM/RW device. I also

When I run SIV (http://rh-software.com/) on wine in XP mode all works as expected some buttons don't get displayed when I use Windows 7 mode. I can tell they are present as when I press [Copy] they are present in the chipboard. Needles to say but on real Windows systems all is as expected. What do I need to do to get this to work please?

On Mon, March 9, 2015 17:36, m.roth at 5-cent.us wrote: > Francis Gerund wrote: > <snip> >> And FWIW, I do like, and use the CLI all the time. That's how I >> learned > - using MS-DOS 3.2 on a 386sx box with 360k floppy drives. And 512k > ram > - what luxury! >> >> : ) > > You leaned on a 386 with (2?) floppy drives? I had to make do >

I am trying to use rsync to move backup file from a cople of Oracle servers to another machine where they will be backed up to tape. The command is run from a script launched by cron and looks like: /usr/local/bin/rsync --recursive --delete --verbose $BACKUP_DIR/* \ euphrates::tigris/logarch/. Rsync is running from inetd on euphrates which has the following defined in /etc/rsyncd.conf:

On Mon, 2020-11-16 at 09:58 +0100, hw wrote: > > [...] > Put a minimal amount of RAM in and go through all of the modules to see if > one or some of them are broken. Replace all RAM or test it in another computer. > Replace the power supply. Replace CPU or test it in another mainboard. > Replace mainboard. If the board has a backup BIOS, use that to boot.

Hello, I am bussy building a xen cluster. When selecting mainboards for this cluster i came only up with core 2 duo mainboards with onboard gigabit ethernet cards with the realtek RTL8111B chipset. I have tested a mainboard and could not find a way to compile the driver sourcecode from the realtek site because of a missing /lib/modules/2.6.16-xen/Build directory. Can anyone help me out? I am

There have been several threads about SATA in the past weeks and the problems with it. I'm still not clear, though, if SATA in general is a problem or just specific functionality or hardware. Do I understand correctly that "mainboard built-in" SATA RAID is a nono on CentOS? That I would need a third-party RAID card for this? What about SATA non-RAID or SATA2? Is SATA supposed to

I am using a Asus M2A-VM mainboard with Athlon X2 2300 cpu. The mainboard features a AMD 690G chipset. I thought this hardware is amd-v compatible. While using xen with hvm I get the message: root@pluto:/etc/xen# xm create /etc/xen/win.cfg -c Using config file "/etc/xen/win.cfg". Error: HVM guest support is unavailable: is VT/AMD-V supported by your CPU and enabled in your BIOS?

I have recently migrated from an old, RedHat Linux 9 - based system (Aurox 9.2) to Centos 4.4. I am having trouble with vnc causing X unusable until reboot. By unusable I mean that X screen is either blank or blinking and moving, which is not cured by X restart until reboot. My system is: Compaq EVO D510 SFF CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz RAM: 256 MB Video: 00:02.0 VGA compatible

I've given up on getting the other machine to work so I'm looking at building a new one. The machine will be a firewall/gateway running NAT, Web Proxy with Dansguardian, DHCP, DNS, NTP and VPN (~6 clients). I read so much about VPN encryption and the processor needs, now I am unsure if this will work. I can get this for AMD FX-8120 Zambezi 3.1GHz Socket AM3+ 125W Eight-Core Desktop

freely quoting from something I posted on #samba a couple of hours ago ########### it appears that challenge/response is actually broken in 4.5.5 Have upgraded 4 dc's and now winbind/freeradius does not work. focused on the radius box thinking that was the problem -- till I finally ran wbinfo -a user%password on all the dc's and they all behaved the same. -> plaintext succeeded

Hello, I''m searching a vt-d capable system for one customer. I need to setup a new server which need to host one linux and one windows system. The windows system need to have access to one analog modem and thus I need vt-d to assign pci- adresses to the windows guest to bring some usb-ports into windows. I''m correct? Now I''m searching a small 19" rack server

Hello, I have some interesting issue with Intel VT CPU and XEN 3.0.2: I''m running XEN 3.0.2 on a MSI Fuzzy 945GM2 Mainboard (http://www.msi.com.tw/program/products/ic/ic_detail.php?prod_no=4) with a Intel Core 2 Duo Mobile CPU (T5500). When booting the mainboard BIOS says it found a EM64T CPU, which is AFAIK the code for a Intel CPU with Virtualisation Technologie. But whether Linux