similar to: Hylafax does not pick up.

I need to setup HylaFax which leads to my first question, anyone got an opinion on whether or not to use HylaFax or HylaFax+? Also, I have to setup a Digi serial port server for an external fax modem. Any reco''s on a robust unit that won''t need to be reset often? Thanks! jlc

Hi! from 2 days I'm trying to run hylafax server and iaxmodem with Asterisk 1.8.5. I have 2 computers in the lan, one is the Asterisk PBX and the other is the server with hylafax and iaxmodem installed. In Asterisk I set up an IAX trunk in this way: ___________________________ iax.conf [iaxmodem] type=friend context=outgoing-fax disallow=all allow=ulaw username=iaxmodem secret=password

I'm running into a strange issue with Asterisk + Iaxmodem + hylafax on the same machine. After rebooting the iaxmodems don't register to asterisk. Stoping and starting the relevant services gets it working, but what is the point of using init scripts if it does not work right? I already tried to adjust the init scripts in /etc/rc3.d so I have: S50asterisk s90iaxmodem S95hylafax So it

Can anybody point me in the right direction please? I'm having some issues getting iaxmodem and hylafax to talk to each other. I have no doubt that someone has had this type of issue before but I can't find anything useful in the archives or on Google. Under RH9, with chan_capi 7.1, Asterisk 1.2.24, with an AVI Fritz ISDN2e BRI card all working perfectly... I've downloaded and

Hi, I have a question: In my company a have a 100% IP Telephony implemented (Cisco Phones, Routers, Switches, etc). We are connected to our operator by two E1 lines. The PBX is on operator side (a H.323 Gateway is configured on call manager). I study the possibility to implement a Hylafax server. In some sites I read that with the IAXmodem is possible to have virtual modems, with don't so

I just installed Hylafax with Iaxmodem and I am not getting good results when receiving faxes. I can see that the modem is reporting the following: Mar 31 16:19:08 pbxoficina FaxGetty[5377]: MODEM Supports 2400 bit/s Mar 31 16:19:08 pbxoficina FaxGetty[5377]: MODEM Supports 4800 bit/s Mar 31 16:19:08 pbxoficina FaxGetty[5377]: MODEM Supports 7200 bit/s Mar 31 16:19:08 pbxoficina FaxGetty[5377]:

Hi, Can you tell me how to configure Hylafax + Asterisk in order to be able to receive/send faxes. Best regards, Guan -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050718/a1c6a47b/attachment.htm

I think I'm very close to getting IAXModem and Hylafax going, but my current inbound hylafax logs show this: Feb 23 10:09:37.98: [ 3638]: MODEM <Empty line> Feb 23 10:09:37.98: [ 3638]: MODEM TIMEOUT: waiting for v.21 carrier Two questions - 1) Does anyone know what step I missed here? (I.e. please help!) 2) Is there a document I should be working off of? Google doesn't seem to

hi list , is having problems when sending a fax with hylafax and a card sangoma A200D, when he sends it arrives to the destination but it paginates appears in white this is my log Aug 20 16:11:08 voz FaxSend[6715]: MODEM Supports 40 ms, 20 ms/scanline Aug 20 16:11:08 voz FaxSend[6715]: MODEM Supports 40 ms/scanline Aug 20 16:11:08 voz FaxSend[6715]: MODEM WWW.SOFT-SWITCH.ORG spandsp/ Aug 20

faxguy, maybe you can tell me why As I've noted in previous posts I'm evaluating HylaFax with IAXModem. When I run iaxmodem and faxgetty through a console the modem works 100% I have yet to find a fax that it won't tie up with. When I run IAXmodem and faxgetty in initttab, the modem is extremely slow to respond and only actually does anything about half the time, the rest of the time

Hey guys, is anyone of you using CentOS (4/5) for an ISDN fax gateway? I just had someone over here at the CentOS booth who wanted to know if there's a possibility to integrate the AVM CAPI into CentOS and then use the machine as a fax gateway with 2, 3 or 4 S0 buses. Is that possible? Cheers, Ralph -- Ralph Angenendt......ra at br-online.de | .."Text processing has made it possible

We run a CentOS-5 based hylafax server with external serial modems. We are transitioning to an Asterisk system using IAXmodem running on CentOS-6. On the CentOS-5 system to start the fax modems we added these lines to inittab: # Add fax lines and always ALWAYS run "telinit q" after making a change. fax1:2345:respawn:/usr/sbin/faxgetty ttyS0 fax2:2345:respawn:/usr/sbin/faxgetty ttyS1

I am having an issue with Centos 6 and an external USRobotics modem. We use the modem as part of a last resort SMS paging system. Across multiple Dell servers, different models, I can't not get the modem to respond to simple AT commands while using Minicom. At the same time if I connect the server to a console port on a switch I can successfully access the switches serial console. So I

I have all three running on the same box. I say OT because it appears asterisk is doing it's job just fine. It must be an IAXmodem or faxgetty (hylafax) problem When faxes work, they look great. I have ten IAXmodems setup with different ports and they register fine. I have ten faxgettys that startup fine. I start the IAXmodems and then faxgettys in inittab. They are setup as a roll

I am attempting to use libvirtd/kvm on CentOS 5.latest to migrate a SCO OpenServer 5.0.6a VM from the old VMware server. I have converted the multiple vmdk disk files to a single file, then used qemu-img convert to create files for libvirtd, both qcow2 and raw formats. After many attempts to get this working I'm up against what appears to be a brick wall. + The VMware VMs are using

I need to write a script that will contact a remote system using TELNET with VT52/1xx/2xx/320 and perform some operations. I am familiar with TELNET but it appears that it won't work for my purposes. TIA, Frank M. Ramaekers Jr. Systems Programmer MCP, MCP+I, MCSE & RHCE American Income Life Insurance Co. Phone: (254)761-6649 1200 Wooded Acres Dr. Fax:

I'm able to recieve fax with pure SpanDSP 0.0.2 + Asterisk successfully but I have problems with some fax machine so I wanted to try using HylaFax to recieve Fax instead of SpanDSP hoping that it'll solve my problem. I'm trying to connect Asterisk with SpanDSP using iaxmodem. My system looks like this: ISDN <---> Asterisk <---> IAXModem <---> Hylafax Asterisk

hello everybody i?m trying to connect to my postgresql via tcpip and it thow an error is not accepting tcp-ip connections I ask to google but i dont find the solution, people said about the prostgresql.conf enable tcpip, I try but when i start the service it thow an error. Other thing is add the option i to postmaster.opt but when i start the service this file is redefined anybody can helpme

Hi, I thought I'd check in with people here. Lets say I wanted to put together a Hylafax server, and an Asterisk server on the same box. And, for the sake of making things simple, I wanted to use a single T1 board for both.... Is this possible? I see Eicon boards are supported by both software, so could I have Hylafax and Asterisk installed on a server with an Eicon card, with channels

O, try the following.   Test this first. ldd /usr/sbin/hfaxd  if you getting libpam.so..  something, then hylafax is compiled with pam support.   Next,   apt-get install libpam-ldap   ( just to be sure, i do believe you have installed it already )   create the file :  /etc/pam.d/hylafax Add :   auth         required       pam_ldap.so account   required       pam_ldap.so