similar to: Back to apcupsd

As we have every day, we had a power blip overnight. one, at least, of the servers connected to a SmartUPS via cable, announced that "power exhausted, initiating shutdown" (which I've disabled). The thing is, I know the servers on that UPS draw a ridiculous amount of power, but I don't see that on the others... and this was three seconds, not minutes, after it announced there

Well, here's the tale: we got a "replacement kit" for some APC SmartUPS 3000 - rackmount UPSs. The "kit", costing about half of what APC is asking, is just the batteries, and you pull the tray out, open it up, and swap out the batteries. Except, I did this on one... and the replace battery light never went out. Not using apcupsd's apctest, not pushing the button. The

Does anyone here have any "feel" for the "Battery disconnected" and "Battery reattached" log entries? The rebooting came as a result of me turning off modems, router, external drives, monitor, cordless phone and finally, the computer, trying to locate a quiet but annoying "chirp". The "chirps" stopped when I tilted the UPS to look at the front

We got replacement battery "kits" for some of our APC UPS' (Smart-UPS, rackmount). I put them into one tray (it's for an RBC 43, which takes 8, and weighs a ton), and put it in, and let it charge. Idiot "change battery" led stays on. So I hit the test button, it discharges very rapidly (a good number of servers on this), and the led stays on. For some reason,

Hi all. Can someone recommend a good UPS for using with an * machine that provides some linux tested software to do managed shutdown in case of power loss? Thanks. Shoval Tomer, IT Manager, SofTov Advanced Systems, Ltd. Office: +972-3-9230686 ext. 179 Fax: +972-3-9216642 Mobile: +972-54-8000200

I need a little help on this problem, please? I include my /etc/apcupsd/apcupsd.conf file is attached. port 3551 udp/tcp has been added to the (running) firewall. My APC is recognized as: APC Back-UPS 450 FW:844.Kld.D USB FW:Kld This from the hardware browser. PS says: root 2419 0.0 0.0 4196 584 ? Ss Mar23 0:09 /sbin/apcupsd -f /etc/apcupsd/apcupsd.conf Is group 2419 the

2009/5/3 Thomas Juerges > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Hi Arnaud, > Hi Thomas, > I just checked the 2.4.1 version of nut and found that you forgot to add > my old UPS model (APC Smart-UPS 900). I guess it is because you were > busy at the time when I sent you the patch. So here it goes again. :) > uh, right sorry. I was pretty sure I applied

We have about 4 servers connected to an APC UPS. The UPS only has one UPS connection. So my question is, in a power outage how do i get all my servers to safely shutdown? Do i run a USB hub? Do i write a script on the one machine connected to turn off all the other machines? I'm confused. Jamie

Hello, On Fri, 17 Nov 2017 10:34:53 -0500 Digimer <lists at alteeve.ca> wrote: > On 2017-11-17 10:16 AM, m.roth at 5-cent.us wrote: > > I can't seem to find apcupsd for C 6. Just went to epel's website, and not > > visible. Anyone have a clue? > > > > mark > > I can't speak to epel, but we have copies of it if that helps you; >

Anyone else around using apcupsd? I seem to be seeing a problem, and I'd like someone to check me on it: I edit /etc/apcupsd/apccontrol to replace the value of SHUTDOWN from /sbin/shutdown to /bin/false (we don't want 3 or 6 servers shutting down over a 2 second or so blip, which it really wants to do). What's happened is that a machine shut down the other day, and looking at it, I

> Am 17.11.2017 um 17:36 schrieb m.roth at 5-cent.us: > > wwp wrote: >> On Fri, 17 Nov 2017 10:34:53 -0500 Digimer <lists at alteeve.ca> wrote: >> >>> On 2017-11-17 10:16 AM, m.roth at 5-cent.us wrote: >>>> I can't seem to find apcupsd for C 6. Just went to epel's website, and >>> not >>>> visible. Anyone have a clue?

I can't seem to find apcupsd for C 6. Just went to epel's website, and not visible. Anyone have a clue? mark

Hello;I just came across NUT, testing FreeNAS/FreeBSD. I?m running at home a APC UPS connected to another computer, running apcupsd. I found out that NUT didn't talk by default to apcupsd, and there was a driver created relatively recently (apcupsd-ups), which filled in that gap. The version I found on my FreeBSD/FreeNAS system seems to imply that there is more to come to that driver (0.04)

Hi, We use Nexenta which has recently implemented a UPS plugin using NUT code. The one problem is that it can't look at APCUPSD servers for APC information. We have a UPS per a rack and a APCUPSD server per a UPS. Without this functionality, we would have to be directly connected to the UPS's for our SAN and we can't do that. Do you have a workaround or something we can do

Hello, Looking for a apcupsd 3.14.14 rpm. Been getting communication lost errors. I read there was a problem with the 3.14.12 version regarding a usb connection which I'm using, but has been corrected in 3.14.14. I found a Fedora 25 Rawhide src version, but the link must be bad. Was hoping I could rebuild it for Cento 6. Looks like apcupsd no longer producing the rpms. I could build one

I have a new-ish APC Back-UPS XS 1500G connected via USB. It's giving me a "ups.alarm: No battery installed!" error. I also installed and configured apcupsd to give that a try and it's giving me the same error. I suspect this is a driver problem because while NUT claims the battery isn't plugged in, it's giving me battery runtime/charge info. Both can't be valid

John R Pierce wrote: > On 11/17/2017 7:16 AM, m.roth at 5-cent.us wrote: >> I can't seem to find apcupsd for C 6. Just went to epel's website, and >> not >> visible. Anyone have a clue? >> > > suggestion, use NUT instead, the Network UPS Tools....? works for all > sorts of UPS's, not just APC, and supports a master/slave sort of > network control

Peter Bell <peter at bellfamily.org.uk> writes: > The problem I had with my BX950MI unit was that it was frequently > reporting off-line, on batt and often not responding to requests from > apcupsd (apcaccess) and then going back online again. However, the > warranty replacement was prompted by a failed battery, apparently > leaking acid, after around ten months use.? As a

Hi list, just putting a new server through its automatic shutdown triggered by the UPS / apcupsd. All worked faultlessly, including powering up when power came back on to the UPS. So then I go to log in and get "POWER FAILURE" followed by "Authentication failure" - this is on the console via SSH I just get "POWER FAILURE" and the ssh connection drops. So I guess

Has anyone tried running apcupsd on CentOS with a usb UPS? Just curious since I'm putting together a system like this and I noticed in the apcupsd docs it say: "Linux 2.4 series kernels older than 2.4.22 do not bind the USB device to the proper driver. This is evidenced by /proc/bus/usb/devices listing the UPS correctly but it will have "driver=(none)" instead of