similar to: Removable drive configuration

I installed checkinstall 1.6.2 on CentOS 5.4 VM (VMWare Server on WinXP). After getting the dependencies installed it compiled with no errors. But when I run it in its own source directory, I keep getting an error that I can't track down. The message is: install: cannot change ownership of '/usr/local/lib/installwatch.so': No such file or directory. But not only does the file

Greetings, Scenario: Centos box with eth1 (10.0.0.0/24) and eth0 (192.168.0.0/24) segment on eth0 has access to full bandwidth of uplink Both are on 100mbps switches Requirements: bandwith on segment on eth1 needs to be throttled to different speeds - say 32, 64, 128kbps and the such. Required for application performance testing purposes. As usual my girlfriend google is very verbose.

I have recently been told I will have to maintain some CentOS servers at work. Since I have only been using Slackware for the last 16 years, I decided to install CentOS on one of my servers at home to get an idea of the differences. I installed CentOS 5.4 from CD with no problems, did a yum update, set up a couple of samba shares and started to copy over some files from one of my other

Dear All I have my CentOS server at @172.16.17.100 and my remote network element at @ 172.16.17.110 and both ones have Internet access . I need to virtually put the remote network element on the same LAN as my CentOS server to be touched with . In my application , both the ip addresses are as invalid ones and I cannot change them . Can you please let me know if there is a settings on the CentOS

Hi I have question about https I am using mozila to access gmail as https://mail.google.com/mail Why mozilla prompts me the alert box? "You have requested an encrypted page that contains some unencrypted information. Information that you see or enter on this page could easily be read by a third party." How mozilla knows I have data not encrypted? ls https secured? Thank you Send

Another issue to consider with SSDs is that they are based on Flash technology. Each flash cell can only be written on about 10,000 to 100,000 times or so (*), so if you're using extensive read/write on your server you will be impacted. SSD manufacturers go around this issue by giving some intelligence to the drive controllers, so that they minimize the per-cell usage (which means moving

>> I am running NUT on a Synology NAS with attached a USB APC UPS. > > Do you have upsd and upsmon running as daemons on the Synology DSM? > Yes I have them both running on the Synology DSM: root 7236 1 0 Jun01 ? 00:00:16 /usr/sbin/upsd root 7741 1 0 Jun01 ? 00:00:00 /usr/sbin/upsmon root 7744 7741 0 Jun01 ? 00:00:12

G'Day, I'm a little confused why the c function has the followng effect on classes - is this a feature ? My workround [ class(cc) <- c("POSIXt", "POSIXct") ] seems to do the job. Many thanks Bernie McConnell "R version 1.3.1, 2001-08-31" on NT > aa <- as.POSIXct("2001-09-23") > bb <- as.POSIXct("2001-09-24") > cc

Anyone got a recommendation for a cheap (but good) colour laser printer that runs under CentOS-5.5 ? -- Timothy Murphy e-mail: gayleard /at/ eircom.net tel: +353-86-2336090, +353-1-2842366 s-mail: School of Mathematics, Trinity College, Dublin 2, Ireland

G'Day again, I am attempting to read a large MSAccess file into R, but get memory problems. With the first 100 rows of the table ("Macca99") things, as shown below, are fine and the resulting object is 33,780 bytes. But when I read the entire table ("MaccaDiv99") which is 218,000 rows R falls over with the message: Rgui.exe - Application error The instruction at

I've been trying to do traffic shaping on one of my public servers and after reading up, it seems like the way to do so is via tc/htb. However, most of the documentation seems at least half a decade old with nothing new recently. Furthermore, trying to get documentation on tc filters turned up a blank. man tc refers to a tc-filters (8) but trying to man that gives a no such page/section

Has anyone come up with a way to get power to a TDM400P card installed in a Dell PowerEdge 1750? Thanks, Adam The contents of this email message and any attachments are confidential and are intended solely for addressee. The information may also be legally privileged. This transmission is sent in trust, for the sole purpose of delivery to the intended recipient. If you have received this

Hi, I have installed an TE110P but forgot to change the jumper settings to E1. I don't have easy physical access to ther server at the moment so I wonder if it will be possible to run it without changing the jumper settings with a configuration like below or will it be impossible to use the card at all before I fix the jumper? I can't try it myself yet since the operator isn't ready

Hi, I am running CentOS 5.2 on Acer laptop, I try to display laptop screen on a LCD TV via VGA cable. It was fine while PC was booting in text mode, but as soon as I started X Window, the LCD TV has error "Unsupported signal, adjust your PC out". How can I adjust or may be regenerate an xorg.conf for the LCD TV (Sony KDL-40V5500)? Thank you. Kind Regards, Jupiter

Does anyone know if I could use modprobe command to find out rather than set the jumper on a Digium PRI card? I want to find out the jumper settings on the card without opening the box which will cause down time. Thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL:

G'Day, I want to access in a function called from tapply the current factor. In my example below, all I want to do is to write the current factor on each histogram. Needless to say my example does not work. I would be grateful for pointers in the right direction. Many thanks Bernie McConnell Sea Mammal Reserach Unit cc <- 1:10 ff <- rep(c("a","b"),5) pp<-

Hello I am trying to configure TE420P but i am confused what to give chan_dahdi :( Below is configuration i am using for TDM400P Please help what changes to make in it... Please provide a link as well [trunkgroups] [channels] ;default for channels switchtype=national rxwink=300 hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes

Hi, I'm trying to disconnect some iSCSI targets, but can't seem to. [root at localhost ~]# iscsiadm -m session tcp: [1] 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:500gb tcp: [3] 192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba tcp: [4] 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:extent0 tcp: [5] 192.168.2.200:3260,1

I have a supermicro AOC-SAT2-MV8 and am having some issues getting drives to work. From what I can tell, my cables are to long to use with SATA2. I got some drives to work by jumpering them down to sata1, but other drives I can''t jumper without opening the case and voiding the drive warranty. Does anyone know if there is a system setting to drop it back to SATA1? I use zfs on a raid2 if

Good Day, Perhaps I have missed a posting but ... I cannot find the RODBC package on cran at www.stats.bris.ac.uk/R/. Many thanks Bernie McConnell -.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.- r-help mailing list -- Read http://www.ci.tuwien.ac.at/~hornik/R/R-FAQ.html Send "info", "help", or "[un]subscribe" (in the