similar to: Problem: NVIDIA C73 & 1440x900

Has anyone put Centos 5.4 (or ant version on aHP Pavilion box? I'm having some problems. For example, I can't get my Dell E198WFPV 1440x900 monitor to work correctly. Thanks, Mike.

hi johnny, >> anyone any hints how to debug this or some clues what could be going >> wrong here. > > Do you have an exclude in /etc/yum.conf for ibutils-libs? how embarassing. there was indeed an exclude on ibutils-libs. (this must be some leftover from using mlnx ofed. we are switching from c73+mlnx ofed 3.4 to c74 stock ib (there's no mlnxofed3.4 for c74, and our old

Hello everyone, I've also posted this onto the Network support forums but figured I'd shoot it to the mailing list as well. I recently purchased a ECS GF7100PVT-M motherboard and now I'm wishing I'd investigated driver support a little better before I did! I was able to get Centos 5.1 XEN Kernel installed but have been having a helluva time getting the on board NIC going. The MB

Hello all, This is the laptop I own: HP Pavilion dv6t Quad Edition Spec: Intel Core i7-2630QM 2.0GHz, 6GB RAM, 750GB HDD, VGA ATI Radeon HD 6490M You can also check the spec here: http://www.amazon.com/HP-Pavilion-dv6t-dv6tqe-Laptop/dp/B00506B7DS/ref=sr_1_3?s=electronics&ie=UTF8&qid=1312164145&sr=1-3 I am going to install CentOS 6 to it but I want to make sure that which drivers

Hello, I have a HP Pavilion p2 1033wb. I has a 3 core Vision AMD E-300 Processor Dual Core runs at 3.2 GHZ. CentOS will run ok with this processor won't it Echolink told me I would have no problem running there program with it. Probably a dumb question but just checking. Thanks, KF7TQV 73.

Hi, I am an applications engineer for Texas Instruments in the UK. I am trying to port the CELT codec to the C5505, this has HW accelerated FFT engine (http://focus.ti.com/docs/prod/folders/print/tms320vc5505.html). I am having problems with the stack allocation. Do you have any reference code that compiles for the C55x under CCS (code composer studio)? *******************************

I have a new install of CentOS 6.4 on an HP Pavilion 500-27c with one mother board nic card. results of lspci : 01:00.0 Ethernet controller: Atheros Communications Inc. AR8161 Gigabit Ethernet (rev 10) 04:00.0 Network controller: Ralink corp. Device 539b results of ifconfig -a lo Link encap:Local Loopback wlan0 Link encap:Ethernet HWaddr 70:18:8B:80:AE:71 There is no

Tom, or whomever reads this, when I say disconnect I mean close out IE6, sorry for so unclear on this point. My IP address never changes unless I unplug the modem. I have had the same IP address for ... well since I had to reset it to hook it up to my Linux box.which was 2 weeks ago. If I set DHCP on my eth1 interface that will contradict the static address I have assigned to it,

Hi I am trying to install CentOS 4.4 on an hp pavilion PC. It wont install just boots in a circle, so I think I have to pass acpi=no at boot stage. Can anyone give me a detailed explanation how do this? Thanks, -- Filianx -------------- next part -------------- An HTML attachment was scrubbed... URL:

hi all, in case someone else runs into it, it is the opfed-scripts rpm that has a postinstall and postuninstall script that changes the yum.conf (bad, mellanox, bad) for a pure/regular uninstall it works fine, but to swap ibutils from mlnxofed to ib stack from os, yum obviously doesn't know that the exclude will be removed. i've seen worse in vendor-provided rpms, but i guess it caught

I'm using CentOS 5 (w/all latest updates as of 2008-01-06) on an HP laptop -- in fact, the exact laptop described here: http://wiki.centos.org/HowTos/Laptops/HP/Pavilion-ze5300_Series Ever since I switched from SHARED to OPEN authentication (and hence from using ndiswrapper to the bcm43xx module, as explained on that wiki page), I've been having packet loss and/or collision on the

Hi, I just installed CentOS 6.6 on my HP Pavilion DM1 laptop. The wireless card is only poorly supported in the default setup, so I decided to write an installation script for the Linux-STA driver, which works perfectly. https://github.com/kikinovak/centos/blob/master/6.x/broadcom-sta/broadcom-sta.sh Grab the files: # git clone https://github.com/kikinovak/centos Run the script: # cd

Dear Sir Can't find /etc/apt/sources.list file please help. When I tried the command on terminal some errors has occurred as follows- manjulata@manjulata-HP-Pavilion-dv4-Notebook-PC:~/Desktop/ndnSIM$ deb http://ftp.iitm.ac.in/cran/bin/linux/ubuntu raring/ No command 'deb' found, did you mean: Command 'dab' from package 'bsdgames' (universe) Command 'dwb'

Hello, I'd like to add a wiki page for the HP Pavillion DV7-2250ED laptop. The proposed position would be http://wiki.centos.org/HowTos/Laptops/HP/Pavilion-DV7-2250ed I'd like to add the steps needed to install, and what's needed to get wireless working (and anything else that pops up after that). Regards, Bas Vermeulen

Dag Wie?rs recently requested contributors for the http://wiki.centos.org/HowTos/Laptops/ section. A few months back I installed CentOS 5 on my HP Pavilion ze5300 (actually an xt5377qv). I'd like to create a page for this.

hi all, i'm trying to understand an issue i'm having with a yum repo (it's a mirror of the c74 repo). there's an rpm in the repo (ibutils-libs in this case); but the client using this repo says it cannot find this rpm (i did yum info ibutils-libs --disablerepo=* --enablerepo=c74 to exclude all other repos). other rpms are ok to use, so nothing structural going wrong (i think)

I am a Macintosh computer (MAC OS X Version 10.4.3) user. I would like to run R for structural equation modeling and meta-analysis but am having difficulty using the Rcmdr interface. According to the R commander installation notes for Tiger Macs ­ I need to 1) Install X11.app from Apple Install disks ­ which I have done 2) Install R.app ­ which I have done 3) Install binary package rgl from CRAN

2016-01-03 20:11 GMT+01:00 Ilia Mirkin <imirkin at alum.mit.edu>: > On Sun, Jan 3, 2016 at 1:52 PM, Csányi Pál <csanyipal at gmail.com> wrote: >> So there is an AMD card too: >> VGA ASUS AMD Radeon R7 240, R7240-2GD3-L, 2GB DDR3, 128bit, >> 730/1800MHz, HDMI, DVI-D, D-sub >> >> What would be the best choice here: >> GEFORCE GT 730 >> or

I've got CentOS 5 installed on my hp pavilion ze 5300 laptop and the network configuration UI says my wireless NIC has been correctly identified and assigned what appears to be the right Broadcom device driver on eth1. However, the inteface doesn't come up. Google doesn't find anything recent about using Linux with Broadcom except for someone's passing remark that Ubuntu 7 beta

Hello, I can't get NVIDIA nForce Networking Controller working with CentOS 5.2 (HP Pavilion a6500f Desktop PC) Any tip will be highly appreciated :-) Thanks, Alex. __________________________________________________________________ Be smarter than spam. See how smart SpamGuard is at giving junk email the boot with the All-new Yahoo! Mail. Click on Options in Mail and switch to New