similar to: looking for RAID 1+0 setup instructions?

Does this mean that my samba is ready to connect to LDAP server? root at webdev # ./smbd -b |grep LDAP HAVE_LDAP_H HAVE_LDAP HAVE_LDAP_ADD_RESULT_ENTRY HAVE_LDAP_INIT HAVE_LDAP_INITIALIZE HAVE_LDAP_SET_REBIND_PROC HAVE_LIBLDAP LDAP_SET_REBIND_PROC_ARGS root at webdev # Thanks! Paras.

Has anyone posted an up to date hardware review lately? It seems clear that a RAID6 server with 300GB CHEETAH 15K.5 SAS drives will trump a P3 with a 30GB IDE drive, however, not everyone will spend the money required for the high end unit, I'm looking to build a new server & trying to make best use of funds (aren't we all). TIA

The relevance of this question can be found here: http://aput.net/~jheiss/raid10/ I read the mdadm documents but I could not find a positive answer. I even read the raid10 module source but I didn't find the answer there either. Does someone here know it? Thank you!

> Apart from ipa are there any other good tools out there for centralised user > auth? I am currently testing LDAP (openldap) combined with nss_ldap, configured with authconfig. I would start by testing IPA. Redhat is building out a set of enterprise management tools which include cobbler and spacewalk; I would think IPA will eventually be integrated into their mgt tools. That said, if

Hi All. I have a server which uses RAID10 made of 4 partitions for / and boots from it. It looks like so: mdadm -D /dev/md1 /dev/md1: Version : 00.90 Creation Time : Mon Apr 27 09:25:05 2009 Raid Level : raid10 Array Size : 973827968 (928.71 GiB 997.20 GB) Used Dev Size : 486913984 (464.36 GiB 498.60 GB) Raid Devices : 4 Total Devices : 4 Preferred Minor : 1

Hi there, I have a system with the following: # fdisk -l Disk /dev/sda: 80.0 GB, 80000000000 bytes 255 heads, 63 sectors/track, 9726 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 83 Linux /dev/sda2 14 9471 75971385 83 Linux /dev/sda3

I just created a 4 drive mdadm --level=raid10 on a centos 4.8-ish system here, and shortly thereafter remembreed I hadn't updated it in a while, so i ran yum update... while installing/updating stuff, got these errors: Installing: kernel ####################### [14/69] raid level raid10 (in /proc/mdstat) not recognized ... Installing: kernel-smp

Greetings- I'm about to embark on a new installation of Centos 6 x64 on 4x SATA HDDs. The plan is to use RAID-10 as a nice combo between data security (RAID1) and speed (RAID0). However, I'm finding either a lack of raw information on the topic, or I'm having a mental issue preventing the osmosis of the implementation into my brain. Option #1: My understanding of RAID10 using 4

I was told recently that Kerberos authentication won't work against a non-windows KDC. Is that accurate? So for instance, it is not possible for Samba running on say RHEL, to authenticate against a Linux server running MIT Kerberos? Additionally, many people said that setting this up was well-documented. Any suggestions of particularly good docs / how-to's?' And lastly, is

Hi, i have a system with /dev/sda - System Hard Drive /dev/md0 - SoftwareRaid 5 for Data with /dev/sdb /dev/sdc /dev/sdd Now i have one more in a removeable frame for Backup /dev/sde /dev/md0 is forwarded to an Samba-Domain for Data service in the network. What''s the best way to sync the data from /dev/md0 to /dev/sde ? is a domain hotplug able ? So when i plug in /dev/sde,

This is on RHE4, I am getting an invalid DN error. Is there a good resource site for this type of configuration issue? There is a lot of info that comes up through google but I am having no luck finding anything relevant (or that seems relevant to me). Thank you in advance and sorry about the newbie question. smbd version 3.0.25b started. Copyright Andrew Tridgell and the Samba Team 1992-2007

Can anyone provide a tutorial or advice on how to configure a software RAID 5 from the command-line (since I did not install Gnome)? I have 8 x 1.5tb Drives. -Jason

Hello, Is it possible to store samba passwords in ldap without configuring samba as a PDC? All the documents/references I've come across are related to using LDAP as a samba PDC backend, not as just a db file replacement. Thanks, David Filion

Message: 11 Date: Tue, 25 May 2010 16:16:45 -0500 From: Andy Akins <andy at egovtn.org> Subject: [CentOS] Having trouble with LDAP Authentication... To: CentOS mailing list <centos at centos.org> Message-ID: <C821A86D.754B%andy at egovtn.org> Content-Type: text/plain; charset="iso-8859-1" I?ve google and searched, and have had very little luck... I have: 1. Installed

https://bugzilla.samba.org/show_bug.cgi?id=11456 Bug ID: 11456 Summary: Allow configuration of MAX_GID_LIST Product: rsync Version: 3.1.2 Hardware: All OS: All Status: NEW Severity: enhancement Priority: P5 Component: core Assignee: wayned at samba.org Reporter:

Hi all, I apologize if I am getting into a subject that has been hashed and rehashed endlessly on this list, but I am just not finding exactly what I am looking for in terms of a response. At the moment, I have Linux and Solaris servers happily authenticating to my MIT Kerberos KDC, and fetching user information via an OpenLDAP server with a StartTLS connection (and authenticating to the LDAP

Hello, I''m testing Btrfs RAID1 feature on 3 disks of ~10GB. Last one is not exactly 10GB (would be too easy). About the test machine, it''s a kvm vm running an up-to-date archlinux with linux 3.7 and btrfs-progs 0.19.20121005. #uname -a Linux seblu-btrfs-1 3.7.0-1-ARCH #1 SMP PREEMPT Tue Dec 11 15:05:50 CET 2012 x86_64 GNU/Linux Filesystem was created with : # mkfs.btrfs -L

Hello all, has someone worked with DRBD (http://www.drbd.org) for HA of mail storage? if so, does it have stability issues? comments and experiences are thanked :) Thanks, Rodolfo.

hi all, i just inherit a server: Compaq ProLiant ML370 Generation 2 Server with Smart Array 5300 Controller with 6x18.2GB hard drives. i want to install centos 5 on it with hardware raid 1. any idea how? it also has a build-in and add-on ethernet cards. how do i know which one is which to assign ip? thanks. t. hiep

Hi, This may be a dumb question (I'm new with this), but is it possible to use SAMBA in combination with LDAP in a Workgroup? All the manuals and examples I can find, are talking about Domains and PDCs. I have to set up a new Samba server and checkout LDAP but I'm not allowed to change the Workgroup settings... Now we use smbpasswd... Is LDAP worth the effort and time? Kind