similar to: modern motherboard for centos-5

I have been building my systems with Abit IS-10 motherboards, but NewEgg has stopped carrying them, so I need to switch to something new. Does anyone have any recommendations on a solid motherboard that works well with CentOS? I need a motherboard with built-in video, LAN, and SATA. I don't need RAID or any other fancy features, just something cheap and solid. I've been looking around,

(a) Mark (mhr) suggested I buy a bare bones box, when I reported the problem with the mainboard in this Dell Dimension 2400 box. Possibly I can have the mainboard repaired (and the PSU, if it is also having problems), and if so, I will give this one to my Stepson and go the bare bones box route and have a more powerful box for myself. I looked at two (2) very low end Desktop mainboards in the

Hello, I have experienced a dom0 crash where the system became unreachable via the network and the console was unresponsive. I would appreciate help interpretting the logs and any configuration change suggestions. It is a stock Debian Lenny dom0 running xen 3.2.1 with kernel 2.6.26-2-xen-amd64 and an AMD Athlon IIx4 with 4 GB of RAM. It is running 4 VMs. One VM has two PCI NICs being

Hi all, I'm having the same issue as in this previous post: http://r.789695.n4.nabble.com/R-error-td4200447.html#a4209042 And as another user of Biostar: http://www.biostars.org/post/show/42562/cummerbund-isnt-managing-cuffdiff-database/#42895 Whereby I'm trying to output cuffdiff data into cummeRbund, but it appears to be having issues with connection to a database (below). Does anyone

Hello list, I've been using PXE Boot for quite some time now and it has been working without any problems. I'm using a Biostar M7VIZ mainboard with a VIA KM400 chipset, and VIA-Rhine VT6102 NIC. Yesterday I upgrade the Kernel on my net-boot machine from 2.4.24 to 2.6.12. When I power on the machine it boots up normally. However, when I reboot the machine, the mainboards PXE-ROM only

Well, it has been a long saga over here trying to get a TDM400P to work with an Intel D845HV motherboard, and the towel is close to being thrown in. Does anyone know of a (few) motherboards that work well with the TDM400P and are socket 478? --Brent

It appears as cpuspeed is not running on my centos 5 box(s). One is a biostar motherboard Am2 6400+ the other is Asus am2 4800+. If I do "service cpuspeed stop" it says OK, If I do a "service cpuspeed start" is says OK. However at no time is cpuspeed running. /proc/cpuinfo only shows the cpu running at 1000 Mhz. If I manually run "cpuspeed -C & " I now have

I have a new biostar motherboard with nvidia chipset. The lspci says MCP51 ethernet. The module was not detected although for FC4 installs it says it works. What is the network module name for the MCP51 driver so that I can try loading it manually. CentOS 4.2 Thanks, Jerry

Ok, Well I have narrowed it down to my mother board. It is a Biostar mother board with an NForce2 chipset. I have the Nvidia driver working on my home machine which is and Asus board with an NForce chipset running CentOS-3 and the Nvidia driver works fine. It has to be the NForce2 Chipset that is no good. I have tried updateing bios, Kernel and Xfree. There is just something with this

Not being familiar with chip sets and other factors that "hardware experts" understand, I am perplexed with the multitude of available motherboards. Is there a Web site that can be of help or a "strategy"? My goal is to replace my motherboard with one that is Centos compatible and uses a Pentium 4 in the 2 MHz range. As example, when I go to Mwave, I am presented with

Executive Summary: Realtek has an r1000 driver for the rtl8110sc NIC at http://www.realtek.com.tw/downloads I've posted this in the forums but it looks like all the action for CentOS really happens here on the mailing list. Plus I hope this might help some other lost soul since google failed to connect this motherboard to *any* mention of the r1000. I thought I found a great little

This is my first post here, and i hope it is ok that i posted in this thread. I have been doing a bit of reading on the solaris platforms, and seem to be inclined to try out the open solaris os or solaris 10. My only worry is that my lack of knowledge with the command line may make this difficult regarding trouble shooting. It seems fairly straighforward creating zpools etc, but maybe nexenta is

Can this MB be used with Centos 4 (or 5)? For reference: http://www.logicsupply.com/products/ms_9832 I don't think we can use this new MB since the Realtek 8111C does not seem to be supported (well) http://forums.tweaktown.com/f69/8111c-nic-revision-ep45-27089/ -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- -

Hi, I am a total newbie to R. I am using R (2.4.1) on Mac OS X 10.4.8 and trying to install some packages using GUI Packages & Data/Package Installer interface... Every time I get: trying URL 'http://umfragen.sowi.uni-mainz.de/CRAN/bin/macosx/universal/contrib/2.4/neural_1.4.1.tgz' Content type 'application/x-tar' length 18920 bytes opened URL

Hi, I need to fit at least three NICs and I was looking for motherboard models that contain 3 or 4 CPI (or PCI-e) slots and works with CentOS. I had a problem in the past with some models that had a bug and did not work well with linux (ok with windows) so that's way I am asking this here. -------------- next part -------------- An HTML attachment was scrubbed... URL:

I am trying to download/install WoW on my openSUSE 11.1 system, running wine 1.1.13. I download the PC Game Client from WoW website, which when launched on windows, downloads the game installer, and then runs the installer. When i try to launch it, I get the following error from the WoW client itself: - Failed to read information from the Internet. In the console where I launched wine from, I

So, I got Quickbooks 2008 working in the latest WINE, and Ubuntu 11.04. Problems happen when I try and open an existing company file. It wants to update, and then updating fails, and then the whole shebang fails to load after that. I even tried copying the Quickbooks folder from the other system (just need to change the license) to make the updates more complete. Same exact problem. It crashes on

Hello, I need help in setting up tftpd-hpa to send a kernel to a client, on a debian woody installation. I did manage the feat when using tftpd to send a kernel to a client which had a separate network interface card, but I would like to do it with integrated LAN. Trials with tftpd failed with error messages starting with 'PXE', and later I learned that tftpd-hpa is needed for the PXE

All- Ah, the saga of the 1U workstation continues. So, in all my work configuring the thing, I completely forgot about AUDIO; I only realized my mistake when I went on a cable-measuring expedition this morning. Unfortunately, none of the 1U servers I've been looking at come with audio outputs (there aren't even audio headers on the motherboard), and I've used the only availabnle slot

Hi All, I am trying to join an AD domain due to the this ( http://gentoo-wiki.com/HOWTO_Active_Directory_with_Samba_and_Winbind ) document. but when i try to add my computer to AD i get these error messages. haploit srb # net ads join -U Administrator Administrator's password: Using short domain name -- ISTANBUL Failed to set servicePrincipalNames. Please ensure that the DNS domain of this