similar to: usb issue on my motherboard

To continue here with problems on this compaq v2000 laptop, I put kernel source on a USB disk and plugged it into the v2000. NOTHING IS recognized. I tried to manually mount the disk and nothing either... I thought USB was well established.... I thought trying to recompile the kernel for realtek support might get my networking going... I am stuck??? Jerry -------------- next part

I am using centos5.3 x86_64 on a gigabyte GA-MA78GM-US2H motherboard. When I insert a USB thumbdrive its detected with dmesg, I mount it and start to copy files. Then I start getting errors: sdd: assuming drive cache: write through sdd: sdd1 sdd2 sd 7:0:0:0: Attached scsi removable disk sdd sd 7:0:0:0: Attached scsi generic sg4 type 0 usb-storage: device scan complete usb 1-5: reset high speed

Seems like overnight every motherboard that worked with linux has DROPPED off the face of the earth. Every motherboard I looked at is using the realtek 8111 chipset and a northbridge that is not supported. Example: GIGABYTE GA-970A-DS3, does not work with linux I tried disabling the onboard NIC and using a PCI-E intel card I always use and that would not work either. The north or south bridge

Hi, I have a v2000 compaq laptop. The realtek network and USB on this machine was not working. After adding to grub.conf "acpi=off apci=off noacpi noapic" the v2000 realtek started working and the USB worked fine... Fantastic! So I thought I would try those same options on my r4000 laptop. they had no effect.... This AMD turion 64 4000+ rating laptop is still running SLOWWW...

I tried formating a 1 gig usb flash drive as fat 16 under fedora 9 using gparted-0.4.3-1.fc9.i386 and syslinux-3.80-1.i386 and and the drive will not boot. No error message, no nothing from Syslinux. There's only a slight pause as if the bios is looking at the usb drive and the bootloader syslinux created but can't seem to make heads or tails of it and then grub boots up from the mbr of

I can't seem to find the info I'm looking for in google, hopefully someone has dealt with these sorts of issues in the past. I have a machine where my messages file keeps getting lines like: Mar 13 18:34:43 nemesis kernel: usb 2-6: reset high speed USB device number 2 using ehci_hcd Mar 13 18:34:57 nemesis kernel: usb 2-6: reset high speed USB device number 2 using ehci_hcd Mar 13

I all, I was thinking about installing centos on a usb flash drive. Perhaps a 4GIG. I dont need X or anything on this drive so installing should fit just fine. Are there boot issues with these flash drives? I'll be using a newer motherboard so the motherboard should be able to boot USB. Does this work? Have others done anything with flash drives? I am wanting this flash drive to be the

hallo to all . This is my first post to this list so please bare with me if i have made any mistake . My problem is : after every boot i receive the following message in terminal : > Sep 19 13:13:02 station2 kernel: irq 50: nobody cared (try booting with the "irqpoll" option) > Sep 19 13:13:02 station2 kernel: [<c044e6fa>] __report_bad_irq+0x2b/0x69 > Sep 19 13:13:02

Hi all, currently on a lenovo R60, after upgrading the CentOS 5.1 I cant detect the USB device any more. The initial installation doesnt have any problems at all. Cannot find solution in forums and bugs either. I am not sure if its a bug or wrongly did an update. The lsusb did not show the device. Things I did: (1) updated to 2.6.18-53.1.21.el5 i686 then to 2.6.18-92.1.6.el5 i686 and here

Hi all, I am trying to extract from the aplay -l output the Card and Device numbers. I had a script that was working but found another motherboard that has an EXTRA word. HDA Nvidia and HDA ATI HDMI is what I am talking about below. how do I search for a line that has HDMI (which I know how to do), then ignore everything upto the device work and take the next field after that? Thanks, Jerry

Hello, I use the following in my ups.conf: # USB: [apc] driver = usbhid-ups port = auto desc = "APC 1500VA" pollfreq = 5 On my new motherboard (an Intel DP55KG), every once and awhile I get this: Broadcast Message from nut at box.com (somewhere) at 17:48 ... Communications with UPS apc at localhost lost Broadcast Message from nut at box.com

We have a 3TB external USB drive that I am trying to attach to some CentOS5 servers. I have tried an older Dell PE1950 and a newer R310 but neither one seems to be able to read the drive. It works no problem on windows servers/workstations and I was able to format with NTFS. I know there are different methods for formatting large disks but this one doesn't even seem to show up as a /dev/

# export USB_DEBUG=5 # /usr/local/ups/bin/usbhid-ups -a CP550SLG -DDDDD Network UPS Tools - Generic HID driver 0.34 (2.4.3) USB communication driver 0.31 0.000000 debug level is '5' 0.000426 upsdrv_initups... usb_set_debug: Setting debugging level to 5 (on) usb_os_init: Found USB VFS at /dev/bus/usb usb_os_find_busses: Found 001 usb_os_find_busses: Found 002

@fsp Please forward to development, manufacturing and quality management department: Model EP1000(PPF6000/100), 431107300095, 4711140480534, Art-Nr. 8296861, 70539, 14Z00000, 35-0200116-01G @nut-users http://www.networkupstools.org/ 2.4.3 debian stable, 2.6.2 upstream, linux 2.6.38-debian-bpo # /usr/local/src/nut-2.6.2/drivers/blazer_usb -u root -DDDDD -a ups Network UPS Tools - Megatec/Q1

On 10 August 2014 09:05, Charles Lepple <clepple at gmail.com> wrote: > On Aug 7, 2014, at 7:57 AM, Leith Bade <leith at leithalweapon.geek.nz> wrote: > > Error -32 is EPIPE, which means that the PC didn't see a reply from the device during the descriptor read. I don't know that we have ever successfully run one of these issues to ground. > Considering Eaton do

Ian Campbell <ijc at hellion.org.uk> writes: #I think at a minimum to make any progress we would need to see some #logs. Probably the dom0 dmesg (perhaps compared to the native boot #dmesg) and the set of modules which are loaded would be a good start. #Probably xen's dmesg would be useful too. Lastly, it would be good to #mention what sort of keyboard this is (USB, PS2?) # #Also the

<!-- @page { size: 8.5in 11in; margin: 0.79in } P { margin-bottom: 0.08in } --> I'm having a problem mounting my new CDRW DVD in my new machine I just built. The motherboard is an Intel DP35DP, and I connected the CDRW DVD via ribbon cable into the motherboard IDE slot. Centos 5.1 is installed and functioning fine so far (other than this problem). I can't mount the

Problem has been solved: "sudo mount -t iso9660 /dev/cdrom /mnt/cdrom -o" mounted the drive after adding "mount /mnt/cdrom" to /etc/festab. ----- Original Message ---- From: Pam Astor <pamastor at yahoo.com> To: centos at centos.org Sent: Monday, March 17, 2008 1:45:16 PM Subject: [CentOS] CDRW-DVD Mount Problem, Centos 5.1, Intel board... <!-- _filtered

I am trying to plug a USB 2 device in a USB 3 slot. Nothing is being detected in "lsusb". Is there something special I need to do? I am running centos 5.5 x86_64. I thought 3.0 was backward compatible. Nothing special about my device its an RS232 to USB device. It works in 2.0 slot. Thanks, Jerry

Is this just because rsync gives it a work out? I may drop using this motherboard, since the store will not replace it, and thinks it's a hard drive problem, and the board has no way to underclock even as a test. What about changing from 1300 MHz to 800Mhz AThlon processor... think that would help an AZZA KT3 ABX motherboard work easier? John G Austex