similar to: r8169-driver CentOS5.2

Hi all, I'm sure this eventually will be resolved with a BIOS or kernel update, but in case someone experiences this on this or a similar motherboard, I thought I'd post a problem-and-workaround report. Platform CentOS5, x86_64 kernel-2.6.18-53.1.21.el5 Motherboard Asus M3a78-EMH HDMI SATA-controller configured as AHCI Experienced symptom; Periodic, ~20s lockups/freezes, several a

Hi all, I'm wondering if I'm running into some dependency issues on my CentOS5 test-machines. I've installed with a fairly minimal package set, updated, removed old kernels and am now experimenting with iscsi and gfs. I think I need kmod-gfs to get gfs -support, but there is only a version that suits the base-kernel, 2.6.18-8.el5. " [root at node02 ~]# yum install kmod-gfs

Hello Sir, (This applies to the RH8.0 supplied syslinux 1.75-3 and the upgraded tftp-server-0.32-1 from RH Rawhide) I'm having fun remotebooting my ViA EPIA box (an ITX form-factor 800MHz ViA C3 semi-embedded pc), and have landed on pxeboot as the 'best tool for the job'. Right now I have it working, but the documentation found elsewhere on the web has confused me. Specifically,

Hi list, I'm having one of those 'I'm stupid' -problems with LVM on CentOS 5.2. I've been working with traditional partitions until now, but I've finally been sold on the theoretical benefits of using LVM, but for now I only have a huge pile of broken filesystems to show for my efforts. My scenario; I attach a disk, either over USB or iSCSI. I create a PV on this

Howdy, It appears that CentOS 5.2's support for the RTL8111B/C chip is incomplete. The wiki has some blanket statements regarding this support: http://wiki.centos.org/AdditionalResources/HardwareList/CentOS5/RealTek/r1000 http://wiki.centos.org/AdditionalResources/HardwareList/RealTekRTL8111b I could dive in an make the changes *I* think need to happen but I'd like to talk to people

Hello, We can see # lspci 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) I have used a custom kernel to start with centos 5.1 as an initial installation Our customer on this kernel has experienced slow pref on samba shares (50 seconds to open a file) So I have decided to updrade to centos 5.2 that have the right

Hello, I would like to install OCFS2 on CentOS5.2 with the 2 2.6.18-92.1.6.el5xen kernel. When I try to compile the OCFS2 source for this kernel I see a message nothing todo for rhel5 in the vendor section. What I did was the following: 1) run the configure script 2) run make in the ocfs2-1.3.9 dir. How can I compile the source for my distribution? Has anyone succeded in compiling the source

Hi, I am very new to this community. I want to make a custom iso which contains CentOS5.2 & scopserv(asterisk based PBX). Please provide me the proper steps for creating an iso. I have created an iso but during installation, only CentOS5.2 rpms get installed & scopserv rpms doesn't install. Is genhdlist command is required? But this command is not working with latest

I have no idea if this is of interest to anyone but it might save you some work .. I created a script that will install Dovecot 1.2-rc2 (currently) to a CentOS5.2 installation complete with Stephan Bosch's Managesieve, postfix, virtual users, LDAP, and LDAP personal address books. Oh right! .. and Squirrelmail plus various plugins (change LDAP password, LDIF import, Avelsieve). Also

I''m trying to install Xen 3.0.4 But It couldn''t mount root filesystem. I''m using the board, loads AMD SB750 chipset. I''m guessing the reason that is the lack of sata driver in 2.6.16.33-xen. So, when I copy libata and ata_piix driver from other driver from compatible kernel source, could it be running well? And, could you advice about copying drivers?

Hi, I was interested in a simple configuration with 2 machines sharing a drbd drive in primary-primary mode. I am done with drbdb, but I am a newbie to ocfs, so wanted some help. I have 2 machines, with centos5.2 , kernel 2.6.18-8.el5. I downloaded the following packages : ocfs2-2.6.18-92.el5-1.4.1-1.el5.x86_64.rpm ocfs2-tools-1.4.1-1.el5.x86_64.rpm ocfs2console-1.4.1-1.el5.x86_64.rpm (download

Hello I've just been hit by one of the chipsets described at http://wiki.centos.org/HardwareList/RealTekRTL8111b. Because a) it does not work with the stock driver included in Centos 5.1 and b) I am very lazy and I do not like manually compiling modules each time a new kernel is installed (not to mention that I never forget anything, except for the important things which always go

Hi Ross, I did it! At last.... I have succeded the installation Xen3.3.0 on CentOS 5.2 This is the step: - [CAUTION] : When installing CentOS do not install Xen or remove previous Xen. INSTALLATION EXTENSIONS - yum install mercurial - download the latest git (git-1.6.0.tar.gz), otherwise "make world" would fail wget http://www.kernel.org/pub/software/scm/git/git-1.6.0.1.tar.gz tar

Hi there, I am slightly confused by the RHEL release notes and an earlier thread here about rsyslogd, so I hope someone can clear this up for me; I see that rsyslog is included in RHEL as of 5.2 (and so will be available in CentOS when 5.2 is ready) however there is no indication of whether it has been made the default syslogger or not - is it an optional package or installed by default on a

I've been using asterisk in a server since CentOS 5.0 without problems, using the same RPMS and I've done all kernel updates. Yesterdey, after updating to the latest kernel from CentOS 5.2, the zaptel dont detect my card. I had to downgrade the kernel. I tried to compile the last zaptel drivers on the new kernel and the same problem accurs. [].s Alessandro Ren

Hi, My jobs need to recompile the kernel codes, but I don't know how to yum the kernel source codes. Any help? Thanks in advance. Ian

hi, i made a mistake that i used centos5.4 i686 to upgrade the centos 5.2 x86_64,which runs on a server whose cpu is Xeon.The server seems to need CentOS X86_64 version. Should i use the?CentOS 5.4 X86_64 disk to upgrade the CentOS 5.4 i 686? Ps.I urgently need to upgrade it because the glibc x86_64 conflicts with the i686 one....It drives me crazy and i am hitting my head against the wall...

> Post the exact command and the error message. [root at Test1 ocfs2-1.3.9]# ./configure checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu ... [root at Test1 ocfs2-1.3.9]# make .... make[2]: Leaving directory `/usr/src/kernels/2.6.18-92.1.6.el5-x86_64' make[1]: Leaving directory `/config/ocfs2-1.3.9/fs' make -C vendor make[1]:

Hi all, I think I've spotted a few stupidities (bugs) in the current version of kernel-utils (kernel-utils-2.4-13.1.80). I'm sure these are all propagated from upstream, but I hope someone could have a quick look to verify this and see if we either can push complaints upwards, or provide local fixes. The kernel-utils package provides several 'kernel-type' functions -

Hi ,Guys I installed CentOS5.2-x86_64 on my Dell PowerEndger 1950 with virtualization component ,when reboot the system halted at: /////////////////////////////////////////////////////////// Red Hat nash version 5.1.19.6 usb 1-5: device not accepting address 4 ,error -110 usb 1-5: device not accepting address 5, error -110 usb 1-5: device not accepting address 6,error -110 usb 1-5: device not