similar to: Centos 5.2 and 2.6.18-92 Kernel backported SATA fixes?

Been running rock solid servers on Centos 3 and 4 for years but equipment is starting to die so it is time. I was thinking along the lines of an Intel Q6600 on an Asus P5K-VM mobo with the new G33 chipset utilizing SATA. Is anyone having success with this board or any of the G33 chipsets where I am not going to run into all kinds of install problems? I see these other threads of install

I have 2 new boxes that I cannot use yet because of problems supporting these newer chipsets in 5.1. Does anyone know when the CD version of 5.0 x86-64 that has support for these chipsets be available on any on a Centos mirror? Has the support for these chipsets been added to yum yet? Here are my latest results with these chipsets and Centos 5.1 1. Asus P5K, E6850, P35 Chipset: Does not

Can someone make a recommedation as far as best chipset for Centos 5.0 or 5..1 using a Q6600 series CPU?with chipsets that have onboard VGA?? From poking around it looks like the G33 and P35 are not supported or have problems until the newer 2.6.22 kernel (the?iso's appear to be earlier than that, think it was?.18)?? So I am considering boards with the Intel G965 chipset but not sure if is

Hi! I''ve got a motherboard (Gigabyte GA-G33-DS3R) where the Ethernet port has been broken. I''ll buy a new motherboard, but wants to keep all my other equipment (CPU, Memory, TV-cards etc). The requirements/wishes on the new motherboard are 2 Ethernet ports and 2 PCI slots. It would also be good if it would support VT-d. I''ve found two boards that would fulfill my

Hi, there, I tried to install Centos 5.1 on a Dell Inspiron 530 box I just bought, but failed due to invalid drive. The installation did not recognize either the DVD nor the hard disk. Joseph from the community said it is likely that Centos can't recognize the controller -- Intel SATA controller (cmiiw). Did anyone solve this problem before? How did you do it? Here's the related

I built this box and was looking forward to running eve on it. 2 weeks later CCP dropped support for Linux and I haven't been able to get a decent install yet. I found some instructions last night that let me run eve in safe mode, but if I tried adding Vent, it would crash. Also, I can't get Vent to run either. Can somebody post a straight forward install so I can run this game as

Dear, I''m looking to get Xen running on a system that (afterwards) seems a bit too new. The board has the Intel G33 chipset with the Intel ICH9 southbridge. This chipset is NOT supported by kernel 2.6.18 which ships with Xen 3.1.2 (and Debian Etch). So the question is: * What version of Xen to install to get going? Should I choose unstable? * What distribution will be the easiest to get

.... New to this list & definitely new to virtualization :-/ .... I am trying to setup a 64-bit CentOS 5.6 VM on a 64-bit FC14 server host, all patched up as of a couple of weeks ago. uname -a on the host shows: [wam at Q6600, CFD, 9:24:23am] 540 % uname -a Linux Q6600 2.6.35.11-83.fc14.x86_64 #1 SMP Mon Feb 7 07:06:44 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux [wam at Q6600, CFD, 9:52:43am]

.... I have a 64-bit CentOS 5.6 VM running on a 64-bit FC14 host. I notice that it has an automatic logout feature after a period of idleness, see below: [wam at centos-5, CFD, 5:52:45pm] 1183 % ll -tr LIST LIST.Update /usr/local/bin/P* /usr/local/bin/*WAM* ; ps -u wam -lf ; uname -a ; date ls: No match. F S UID PID PPID C PRI NI P SZ:RSS WCHAN STIME TTY TIME CMD 5 S

Hello all, Does anyone have experience with CentOS and the Intel P35 or G33 chipset? I've googled about and poked in the CentOS forums, but I've generally found questions without responses. I'm part of a university research group doing CFD (computational fluid dynamics). We're incrementally updating our computing power and have been looking at Intel quad-cores and the P35

Some background - I have a couple of NetBSD (i386) boxes and CentOS 5 boxes that I want to virtualise and I''m trying to work out which OS will be most suitable as the dom0. I have a desire to run at least RAID1 and ideally ZFS mirroring on the dom0 so I can have all the domU''s not have to worry about disk redundancy etc. My hardware : I have a brand new Intel E8200 core2duo and

Hi I've installed CentOS 5.2 (i386) in a computer with a DG33BU motherboard ... When I installed it it crashed because of ACPI issues. Searching Google I found that I need to turn ACPI off in order to successfully install CentOS, which I did. After a while I noticed that because of ACPI is off the Linux kernel finds, initializes and uses only 1 CPU core in the Q6600 quad core CPU that is

I just installed CentOS 5.1 on a Dell Vostro 200 (Intel G33) which has a Sunix PCI-Express (x1) 8-port RS-232 card installed. For me it looks like only 4 ports are recognized, but I'm not sure if it's even working with those 4. >From 'dmesg' I see this: ... Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19

Hi, I'm trying to get a system with an Intel G33 video chipset in it (Supermicro C2SBA) working with the Intel driver but I'm not having much luck.. I took the patch from Hiroshi Nishida and added the G33 PCI ID's for it now I get agp/i810 attaching to it.. Matched G33 Matched for Intel G33 IG SVGA controller Matched G33 Matched for Intel G33 IG SVGA controller agp0: <Intel G33 IG

I am new and trying to get Daz Carrara 6 Pro going on Ubuntu Hardy. I am on a Core 2 Quad Q6600 Dell Inspiron 530 using an ATI X1650 pro card. I am using the Ubuntu Add/Remove ATI drivers and Wines. Carrara 6 pro 6.1. and I just updated to 6.1.1. I did not load the C++ and I have turned off windows management in WINE. If I change the interactive rendering settings and click OK, Carrara

Hey all I have here two machines... Machine A) AMD Athlon XP 2500+ CPU Nvidia 6800GT GPU 1GB DDR 400 RAM Ubuntu 8.04-32bit OS Machine B) Intel Q6600 CPU ATI/AMD 3650 GPU 2GB DDR2 800 RAM Ubuntu 8.04-64bit OS Machine A plays Civilization IV and Oblivion just fine, played for an hour last night with no issues. Machine B gets to the part where it initializes the engine of the game and after a

I have recently formatted my system in order to install Intrepid Ibex, and I am now using it with Wine 1.1.7. I did a backup of the prefixes of the games I was using in Hardy / Wine up to 1.1.5, and imported them in my new installment. The games work normally, but the sound is crackling all the time for each of them; something which was not happening in my former installment. I have not noticed

Hello, I have been working sometime now on getting a HVM accepting a PCI card from the host. As was said in the VT-D wiki I bought an ASUS P5E VM DO motherboard (rel 0803) which has the VT-D option in the bios. I want to pass a Hauppauge PVR 500 card to a virtual machine running LinuxMCE. After first trying XEN 3.2.1 which did not enable the "VT-D virtualisation" bit in xm dmesg, i

????????????. ????? ??? ????????? ???????? ?? ????. ?? ??????? ?????????? ? ????????? ?? ????? ??????????? ?????? ????? ??? ???????? Gigabyte GA-P35-S3, ??????? ????? ?????????? ??????? ???????? Realtek RTL8111B/8111C. ??? ???????? ?? ????? ?????????? ?????????? ??????????? ????, ?? ????? ?????? ?????? ?????? ?????????? ?????? ?????????. ?

Hi, i''m a little bit stuck here with creating a HVM-Windows (w2k3) Guest under Xen 3.1. I''m using ubuntu 7,10 with a 2.6.22.16-xen-patched kernel which seems to be stable for single cpu-linux guests. Cpu is a Q6600 and XD,VT and VT-d is enabled in the bios. When i create the windows guest with ''xm create w2k3 -c" (conf below) I get: "Started domain