similar to: Mounting Floppies

Hi all, I have trouble with making the symbolic link to the corresponding device node. I have typed sudo In ~/.wine/dosdevices lrwxrwxrwx 1 username d: -> /mnt/cdrom but it gives me this error : prawira@ubuntu:~/Warcraft III$ ln ~/.wine/dosdevices lrwxrwxrwx 1 d: -> /mnt/cdrom bash: /mnt/cdrom: Permission denied prawira@ubuntu:~/Warcraft III$ ln ~/.wine/dosdevices lrwxrwxrwx 1 d:: ->

Thanks for your response, and how would you suggest that one would fix that? It hangs in the boot process! woody ==================== From: Christopher Clark <christopher.w.clark@gmail.com> [Add to Address Book] [View Source] To: "tarawa1943@comcast.net" <tarawa1943@comcast.net> Cc: xen-devel@lists.xensource.com Subject: Re: [Xen-devel] xen-unstable dom0 boot "Floppy

Hi there... I have kernel version 2.6.36.3, compiled with gcc 4.4.5, btrfstools version 0.19+20101101 I have a btrfs filesystem (/data) consisting of two 1TB hard disks, raid0. I added in another 1TB hard drive. root@X86-64:~# btrfs filesystem show failed to read /dev/sdh failed to read /dev/sdg failed to read /dev/sdf failed to read /dev/sde failed to read /dev/sr0 failed to read /dev/fd0u800

Hi all, I am trying hard to get a Ubuntu server up and running with Samba 4 installed so it can function as an? Activie Directory server in windows network. I installed 12.04 on a reasonable box and this went well. I then followed the instructions for getting Samba 4 installed and running. http://wiki.samba.org/index.php/Samba4/HOWTO#Samba4_HOWTO I was able to complete steps 1 to 3 - get,

Hi, Updated to current bk today, and my machine stopped booting ... I''ve tracked it down to the apic changes from end of last week. cset 1.1307 boots fine, 1.1308 doesn''t. Diff of the boot messages is below. Full logs are also attached. Gerd --- log-1.1307 2005-04-21 14:40:57.372885027 +0200 +++ log-1.1308 2005-04-21 14:38:52.236553392 +0200 @@ -7,7 +7,7 @@

Trying to be not long, on x86 I have 3 floppies images boot, root-1, root-2 Booting from boot image with no problem, I try reading root-1 and root-2 image in raw format. Reading root-1 and root-2 is made from boot init script, using klibc-1.5.9 or klibc-1.5.10 with debian insmod patch, and a vanilia linux-2.6.24.7 root-1 and 2 images are smaller than 1440 kB and are made the same way with cd

Hello, I am trying to boot a FC6 domU on Xen 3.2 (compiled on a FC6 system). After compiling Xen 3.2 successfully on FC6 and making the ramdisk, I modified the conf.grub as shown below. With this, I was able to boot xen. ------------------------------ --------------------------------------------------------------------------------- # grub.conf generated by anaconda # # Note that you do not have

Hello, when testing FreeBSD-7.1-BETA i discovered that the floppy disk controller doesn't work correctly. Trying to format a floppy (perhaps with bad blocks) i get: Processing fdformat: ioctl(FD_FORM): Device not configured instead of the normal E letter. I then checked the same problem is present on FreeBSD-6.3 and it has been reported by Beech Rintoul (*) in 2006! Of course the floppy disk

has anyone received from the build/boot of dom0 "Floppy drive(s): fd0 is 1.44M" when put on a thinkpad without a floppy drive? woody _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel

Yes, really. I've got hundreds of the damn things here at home, and I want to go through them and get rid of them all. But... to do that I want to read them. I have both a 5.25" and a 3.5" drive, both are plugged in, but in the BIOS, all I see is the 3.5". Fine, I figure I'll take care of those. Nope. I see /dev/fd0 once I've booted up, but neither konqueror nor

Hi, I am hoping someone can kick me up the learning curve (!) on Virtualization: We have an old piece of data logging software that was written in Turbo Pascal 6 using a file I/O module tuned to Netware and so it expects its data files to be on a Netware server and will not access them locally or via an MS/Samba share - essentially, it uses direct NCP calls for parts of its data access. The

Hello, i want to encrypt my HDD's with GELI (not the root-fs, though). I want to do the encryption without password, just with a key. The key should be stored in a floppy disk, and the read should be read automatically on boot, from the floppy. There is a problem here, because GELI initializes _before_ mounting the disks from /etc/fstab (for obvious reasons, of course). So GELI is not able

Hello, I successfuly run Centos 5.1 domU in Centos 5.1 dom0. But I still have some minor issues/errors/warnings while booting I'd like to fix and here are my questions: 1. How to disable loading usb host controler module: [...from dmesg... ] Loading uhci-hcd.ko module USB Universal Host Controller Interface driver v3.0 insmod: error inserting '/lib/uhci-hcd.ko': -1 No such

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello Everyone, On October 31st, FreeBSD 5.3 and FreeBSD 5.4 will have reached their End of Life and will no longer be supported by the FreeBSD Security Team. Users of either of those FreeBSD releases are strongly encouraged to upgrade to FreeBSD 5.5 or FreeBSD 6.1 before that date. In addition, the FreeBSD 6.0 End of Life is presently scheduled

Hi, I suspect this bug has already been reported, but here it is just in case: the bootable floppies I produced with syslinux 2.10 (just by running 'syslinux /dev/fd0') are not able to 'remember' the parameters I pass at the boot prompt. Namely, to boot a USB pen from one of my floppies I pass something like boot: MoviX MEDIA=usb (where MoviX is the boot label) but the usb boot

Hardware Supermicro X7DAE (AHCI BIOS) dual Intel Woodcrest processors, 6 x Western Digital Raptor SATA drives. I have installed b62 running 64 bit succesfully on a PATA drive. The BIOS is configured to access the SATA drives in native mode using hte AHCI Bios. I have 6 SATA II drives accessed via the Solaris AHCI driver. I have created a ZFS file system across all 6 drives. This works fine until

Hi all; I successfully run samba 4 as DC. Joining win7 into it working, mobile profiles also. I used this tutorial: https://wiki.samba.org/index.php/Samba_AD_DC_HOWTO Because in my domain I will use few hundred acccounts I want to automate account creating in my domain. I would like to do that via bash script from linux side. I tried to create account via command: ./samba-tool user create demo8

Hi there ? I've installed a test-VM with Debian Wheezy (7.7) and used this tutorial to set up a test-lab for samba4: http://mark.orbum.net/2014/02/22/compiling-samba-4-on-debian-wheezy-active-directory-domain-controllers-ho/ ? Its working for now, but the part with the home-share (just a simple share for profiles etc.) is not working. I cant even browse with the administrator at domain

tools/libxl: Disable useless empty floppy drive with qemu-xen Signed-off-by: Fabio Fantoni <fabio.fantoni@heliman.it> --- tools/libxl/libxl_dm.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/tools/libxl/libxl_dm.c b/tools/libxl/libxl_dm.c index 51f9914..c265618 100644 --- a/tools/libxl/libxl_dm.c +++ b/tools/libxl/libxl_dm.c @@ -406,6 +406,9 @@ static char **

Hello syslinuxers I'm stuck with a scientific problem which gives me headaches: I have a laptop (Gateway MX3410) which has a SD memory card reader. Recently an interesting thought crossed my mind: why don't I setup a 2GB SD card as a harddrive and put some rescue tools on it. So I dug on the net and I came across the idea of using memdisk to boot floppy images without the need of a