similar to: OT: HP Autoloader Issue

Hi, I need to backup data to an HP autoloader, it needs to be *full* backups each time so using Amanda doesn't make sense. Can someone point me to what utilities to use to access the autoloader, I would rather read up on this myself as my knowledge here is very weak. I am moving this unit from a windows environment running Backup Exec. I know all of those features won't be available but I

Joseph L. Casale wrote: > I spent a good chunk of time trying to get an HP LTO Autoloader to > work with Amanda only to later find out it was faulty. Aside from HP > who has a brutal system for repairing hardware, does anyone know where > I might be able to send it for repair? > Joseph, Maybe the follwing link is helpful : http://www.useddlt.com (German Website)

We are migrating an LTO2 library off Veritas and NTBackup on a Windows Server to a Linux Server with either Bacula or Amanda. Originally, the Windows server used scripts to sync changes from various other Windows servers using Robocopy to a locally attached set of volumes, then ran the backup nightly (Full's were always done). I now had hoped to rsync the Samba shares to a local replica on

Hello all. I have 15 or so CentOS servers (now v4.4, I will upgrade them all to 5 when it comes out) and a few windows machines. I am looking to implement a network backup solution using Amanda. I will be backing up 200 gig or so to start, but that will grow. Does anyone have any recommendations on tape drives that will work "out of the box" with CentOS? Thanks, Joe

I'm curious to what people are using for backing up their samba servers. Here's are some specs to consider: - 1TB (yes, that's terabyte) of data - multiple servers backup to one tape drive connected to a server (preferably a linux system) - using an autoloader (in this case, an HP 1/9 LTO system) - need to be able to backup daily changes and/or changes since last full backup

Hi, After installing the latest versions of lme4, Matrix, VR on a Debian Box, I have run into a problem. When I use library(lme4) on R Version 2.1.0 (2005-04-18) I get the following error message: > library(lme4) Loading required package: Matrix Error in autoloader(name = "confint", package = "MASS") : autoloader did not find 'confint' in 'MASS'

Hi, I'm not sure when this started occurring, but now I get: ---<--------------------cut here---------------start------------------->--- $ r -e 'quantile(rnorm(1e5))' Error in (function (name, package, ...) : autoloader did not find 'quantile.default' in 'stats' ---<--------------------cut here---------------end--------------------->--- I'm using

I am trying to get amanda backup going on a CentOS 7 system and things are not working: sharky4.deepsoft.com% sudo systemctl start amanda-udp [sudo] password for heller: Job for amanda-udp.service failed because a configured resource limit was exceeded. See "systemctl status amanda-udp.service" and "journalctl -xe" for details. sharky4.deepsoft.com% sudo systemctl status -l

hello puppet list My puppet server is now working quite wonderfully. Thanks go out to all who have assisted in getting it to this point. At this point in time my config is now correctly installing packages according to arch,os and release. Centos is working quite well as of now, but I am attempting to get the ubuntu side of things to work as well. I am frankly more familiar with RHEL under

Hi there, I am pricing out a dell 840 (low end file server) that will run latest centos. Can anyone recommend a good tape drive/card combo with centos? The drives (to be backed up) in it will be a raid 0 - 500gb. Thanks in advance! Dustin

Hello All, I''ve run into an issue where an array that''s being passed into a defined type is being "flattened" when it''s inclosed in double quotes and I''m not sure how to get around this. This is happening a the pdxcat/amanda module and I''ve raised an github issues for this but wanted to query the community as a whole. The issue and my branch

I''ve been working up my first puppet module, one that will make Amanda configurations consistently. In general, I''d like the following to happen: - Each Amanda server should make sure all its holding disks are configured properly; this should only happen once per server, per puppetd run. Definitely not on a per-configuration basis. - Each Amanda server should keep its

hello list!! I am still having some file sharing issues with this puppet server and I was hoping someone would have an opinion they could share on this situation ## puppet errors err: //basefiles/File[/etc/yum/pluginconf.d/priorities.conf]: Failed to retrieve current state of resource: Error 400 on SERVER: Not authorized to call find on /file_metadata/acadaca/yum/pluginconf.d/priorities.conf

CentOS Linux release 7.1.1503 (Core) amanda-3.3.3-13.el7.x86_64 amanda-client-3.3.3-13.el7.x86_64 amanda-libs-3.3.3-13.el7.x86_64 dump-0.4-0.22.b44.el7.x86_64 Hi, I have been using amanda backup for quite a long time now. I'm busy migrating some older hosts to CentOS 7 but have found that the available amanda packages (see above) have not been compiled on a host that has the 'dump'

Hi List, Happy New Years and I was hoping to get some help on an ssh issue that I am having. For some reason I am unable to scp to hosts on this network using RSA keys. Here is what I am doing/what is going on; scp the public key to remote host [amandabackup at VIRTCENT18 ~]$ scp ~/.ssh/id_rsa_amdump.pub amandabackup at lb1:~ amandabackup at lb1's password: id_rsa_amdump.pub

hey centos long time no hear! :) I'm having a small issue where the backup jobs that I set to run in the crontab of the backup user do not appear to be running. Here's how I set it up (with crontab -e as the backup user): run amanda every night (check at 2:45 and backup at 3) 45 2 * * * /usr/sbin/amcheck /var/log/amanda/crontab/amcheck.log * 3 * * * /usr/sbin/amdump

After the large update from 7.2 -> 7.3 there is one major problem, the amanda backup packages. Strange situation, the host is the amanda server is working fine at backing up all my remote clients. But it has an error backing up itself. The amanda packages did not change version (3.3.3) and I've done no configuration change. I'm not looking for help debugging this at the moment.

Hi James, Based on your suggestions, I improved the 'project details' and 'project timeline' sections of my proposal. Could you kindly review it and let me know if it requires further improvements. Regards, Amanda On Thu, Mar 17, 2016 at 2:06 PM, Amanda Jayanetti <amandajayanetti at gmail.com > wrote: > Thanks for the information Olly! I uploaded the same proposal that

hello list, I am attempting to ssh via a user account setup for amanda backups from the backup server to the test backup client. AFAIK everything is setup correctly yet when I ssh as the user to the client I have to type the password. the public key is in the authorized_keys file of the client and permissions all seem correct. Here is a verbose output of the ssh session [amandabackup at

Anyone familiar with the selinux policy for the amanda backup software package? I'm getting lots of data not being backed up. For example, under /home there are 2 directory trees owned by root. Those get backed up, user home dirs do not. No AVC denials nor messages in /var/log/messages or journalctl log. But if I turn off selinux enforcing, or set amanda_t type to permissive, complete