similar to: Re: Routing inside box, is it posible ?

Hello list, Here is a setup of my network: eth0 <-> router1 <-> eth2 --- wifi --- eth2 <-> router2 <-> eth0 | | eth1 eth1 Router1: eth0 - Internet connection eth1 - Local network (network 10.1.1.0/24) eth2 - Wireless AP (network 10.1.10.0/24) Router2: eth0 - Internet

> I've been having troubles getting cross subnet browsing working in > existance with a WinNT domain master (hey, it's not my machine). > Basically what is happening is that I am trying to setup a VPN (which > shouldn't complicate things) that browsing will work across. The idea is > this: > > There is an office in my local city that I'm connecting San

So this is a little off topic but this list is so helpful!! Is this the correct way to split our /24 block up? Tom suggested something like this in an earlier post but that did not work either. So what should I change to make this work? Internet<===Shorewall Box===>router1<++++T1 Line++++>router2<==LAN I need a /28 on the Shorewall side of things and the rest on the LAN side of

Dear tinc community, I am using tinc in switch mode. I have three nodes. Two nodes reside on routers, vpn-eth is bridged with internal lan, each router has several machines connected to it's internal lan. Third node is the roadwarrior - "endpoint" linux PC. When the roadwarrior is off - everything works perfectly, machines on both sides can communicate without a problem in any

Hi, The network topo looks like this: the original network: router1 router2 | | |----------------OSPF------------| the target network: (we need to insert a transparent firewall between these 2 routers, so a proxy arp is set up on firewall to bridge router1 and router2) router1 firewall router2 |

Hi folks, I have 2 firewalls, setup with Centos 5.2. They are also routers, connected to 2 upstream routers. I have some cases where connections from servers to the internet leave my network via router2 and answers come back via router1. So I added conntrack tools to both routers/firewalls to synchronize the session tables (using ftfw procotol). That works as expected. If e.g. I ping from

I have had Shorewall 2.0.8 up and running for a month or so. Now I need to change some things around. Currently I am running on a private IP scheme and Shorewall is setup based on the 3 interface guide. Now I want to change to a public scheme on my "loc" zone. I have a /24 block of public IP''s. I need my private scheme and public to co-exist so I currently have is eth1 (local)

Thanks Jose, I found the key in the routing table of Router2; it had bad entries for the farest subnets (didn't have the 'via' commands...). Thanks for helping me. Now I'm gonna configure the network with IPv6 'cause I have to make it work with Mobile IPv6. Anybody working on these funny things can mail me, so we can suffer togheter! :-) Bye, Mauro -----Messaggio

Hi, I am trying to set up a VPN that allows mobile users to access multcast information from an information vendor. Hence Tinc is configured as a switch. Internet --[ router1 ]------[eth0 VPN eth1]--------------[ router2 ]--------- mobile users VPN server is running Ubuntu 10.04 and is also configured as a dhcp server that hands out IP address to connecting mobile users. A bridge (br0) is

Hi, With kernel 2.4 I was able to use equalize to send our outgoing packets to two different routers (our isp supports this setup), like this: ip route add default src ip.a.dd.rr equalize nexthop via <router1> weight 1 nexthop via <router2> weight 1 The two routes were used equally on a per packet basis, not per flow or per cached route, but per packet, each line has 800k upload

what is the limit on the arp cache entires ?! Does someone have very big LANs with linux-routers ? How big ? (i mean flat L2 network, not segmented) I want to know how much can my net can scale ? thanx _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

I've been having troubles getting cross subnet browsing working in existance with a WinNT domain master (hey, it's not my machine). Basically what is happening is that I am trying to setup a VPN (which shouldn't complicate things) that browsing will work across. The idea is this: There is an office in my local city that I'm connecting San Francisco to via VPN. The TCP/IP part is

I have this kind of network: /==========\ /==========\ /==========\ | ROUTER 1 |---| FIREWALL |---| INTERNET | \==========/ \==========/ \==========/ | | /==========\ /==========\ | LAN | | ROUTER 2 | \==========/ \==========/ The firewall allows only ports 80 and 443 to the internet and 22 to the ROUTER 2. It also allows everything from ROUTER 2 to the

Folks, I''m so surprised what happened to my box just in the few weeks lately. Here is my setup: INTERNET <----------> [eth0] SHAPER-BOX [eth1] <----------> USER-FARM both eth0 & eth1 got public ips (202.x.x.x) Why traffic monitored at eth0 is bigger than eth1 ? eth1 shaped just exactly the same as rate i defined in HTB. I just have 1024Kbps from my ISP and i defined the

Hello, The setup is : Asterisk ------<www> ------- Router1---------<LAN> --------- SIP Phones | | |------------------<pstn>----------Router2------------| (I hope the sketch is understandable. If not, it could be summarized with : "SIP hardphones on a given LAN are connected to an Asterisk server through 2

Hi, I am new in LARTC list. I had intermediate skills in networking. What I tried to do: Use 2 links with loadsharing + falt toletant (to add bandwitdh) ok ! I am use Debian Etch in router/fw With kernel debian default + routes-2.6.17-12.diff patch The Problem: The iproute2 just route thought the last gateway of nexthop rule. I was running tcpdump in 2 terminals, tcpdump -nni eth0 ...

Hi all I have a problem splitting traffic behind 2 adsl. My situation: _________router2 | lan1 ------- fw ----------- router1 | lan2----------| lan1 use router1, lan2 router2. The linux default gw is set to router2, lan2 browse internet without any problem (icmp, tcp..). Lan1 is blocked. >From lan1 i can ping router1, and i''ve set

Hello, LARTC mailing readers, I hope u can help with this mysterious issue i''m having with my linux box acting as a router. Scenario: Linux running 2.6.8.1 /w julians patches Latest iproute (iproute2-ss040702) 4 NICS ----------------- | x eth0 (63.43.x.x) network mask (255.255.240.0) | | x eth1 (63.43.x.x)

Hello, LARTC mailing readers, I hope u can help with this mysterious issue i''m having with my linux box acting as a router. Scenario: Linux running 2.6.8.1 /w julians patches /w support for multipath routing Latest iproute (iproute2-ss040702) 4 NICS ----------------- | x eth0 (63.43.x.x) network mask (255.255.240.0) | |

Hi, I have problem with multicast routing on my network. I tried mrouted and also pimd, but always same problem. When I set mrouted or pimd on one router, everything works fine, but when I start mrouted/pimd on another one, routing die. In moment when I start anorher mrouted/pimd /proc/net/ip_mr_cache is cleaned. My topology: gateway (no mrouted/pimd)