similar to: UPS MGE serial cable over network.

Dear List, I thought it might be useful if I wrote up my notes on getting an MGE UPS to work with NUT and openSUSE. The MGE UPS (an Ellipse 1500 USB) will work well with NUT and openSUSE 10.2, but not "out-of-the-box": there are some things you need to do: Intro. MGE have built rpms of NUT which greatly simplify installation. Merci MGE. I used the rpm's for nut-2.0.5 and the

I'll be back one more time perhaps I found the reason of these errors Nov 13 11:09:22 mezenc upsmon[3865]: Poll UPS [mgeups at localhost] failed - Data stale it happens when daemon upsd et upsmon are started after the boot obviously, there isn't any errors when upsd and upsmon are started at boot following later ... -----Message d'origine----- De : goudard sabine Envoy? : mardi

Hello, It is 3 or 4 weeks ago since, i want to set communication with my ups a MGE NOVA 1100 AVR. I do it first with manual configuration but after no success, i prefered to install mgeups-psp package to do it directly. But since when i execute psp, the attempt finish with an "No communication with UPS" error. Same is when i type: mge-shut -u root -DDDDDDDDDD /dev/ttyS0 . I unplog

Hi, I bought an Ellipse MAX 1100 a few months ago. First I attached it to my desktop and installed mge's personal solution pac. (a graphical interface which uses nut). It works. But I want to attach the ups to my server which runs without an x-server. I followed http://opensource.mgeups.com/install/debian.htm. Didn't work. Then I copied over the configuration files which the personal

Greetings Arnaud and others, I've been using NUT with Gentoo Linux for a couple of years now. I recently installed SUSE Linux 10.0 and I'm having difficulty getting it to recognize my UPS (MGE Ellipse). I tried the MGE-PSP package, but the GUI crashes immediately on startup. I decided to get just NUT running correctly before worrying about that. I uninstalled MGE-PSP and am left wtih

- UPS MGE Premium Ellipse Premium 1200 - SuSE Linux 10.0 OSS, kernel 2.6.13 smp - gcc version 4.0.2 20050901 (prerelease), glibc-2.3.5-40 - mgeups-psp-3.0.0-3, nut-2.0.2-4 - Dell Dimension 8400 with dual core Intel Xeon. 3.0GHz. lsusb shows: Bus 002 Device 003: ID 0463:ffff MGE UPS Systems UPS less /proc/bus/usb/devices shows for bus 2 device 3: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=

Dear List, The driver usbhid-ups does not detect my MGE Ellipse 1500. I'm running openSuSE Linux 10.3, kernel 2.6.22 with mgeups-psp-3.0.4-2, nut-2.2.0-20 installed from MGE's rpm's. (Merci MGE!) lsusb shows: Bus 001 Device 004: ID 0463:ffff MGE UPS Systems UPS /etc/ups/ups.conf says: [myups] driver = usbhid-ups port = auto desc = "Local UPS"

Hello, I'll be back with my MGE Evolution 2200 connected with RS232 I upgrade nut 2.0.1 in nut 2.2 + psp as you ask me PSP autodetect my UPS and autoconfigure NUT. not really diffcult ! So I didn't change anything but I always have in my syslog these event Nov 13 11:09:22 mezenc upsmon[3865]: Poll UPS [mgeups at localhost] failed - Data stale Nov 13 11:09:27 mezenc upsmon[3865]: Poll

Hi, I recently bought a MGE protection center 500. I am running a gentoo, and I am currently trying to enable the ups handling by the os, with no success. First, I compiled and installe nut 2.0.2 (with usb support) and psp 3.0. I made ebuild for them that I will submit soon to bugs.gentoo.org. The ups is connected via usb, and lsusb confirms that the device is detected (cf end of the mail for

Hello, I have installed mgeups (for Mge ellipse premium 500) in a Suse 10 x86_64 machine with yast2. But when I try to launch psp I receive the next error: psp: error while loading shared libraries: libgtkmm-2.4.so.1: cannot open shared object file: No such file or directory and don't start. The rpms installed are: mgeups-psp-3.0.1-3 nut-2.0.2-5 glibmm24-2.8.0-2 gtkmm24-2.8.0-2

Hi I try since a week to run my MGE Protection Center under Suse Linux 9.3. At the MGE site i found an HowTo. I have installed NUT an create the=20 configs but at boot the newhidups driver say=B4s "no USB/HID UPS found".=20= Anyone an Idea? Johannes Schatz=

Hi, I have installed in suse 9.3 and ellipse premium 500 usb a psp 3.0 with yast2 and versions: nut-2.0.2-4 mgeups-psp-3.0.0-3 the first time that I launch psp it seems to contact the UPS and you can make changes to the parameters and all seems ok. If you make a reboot the psp hangs up and if you try /etc/init.d/ups it fails: Starting service NUT: -> Starting UPS driver: Network UPS Tools -

Hi. : ) I was updating my unofficial Korean Ogg Vorbis FAQ, when I noticed the following: While #ext is no longer listed in the FAQ contents, http://www.vorbis.com/faq.psp#ext still exists. IMHO http://www.vorbis.com/faq.psp#stream looks a little awkward. I suggest something like: Icecast streams Ogg vorbis to playsers like XMMS, Winamp 2, and foobar2000, which are all capable of...

On Dec 1, 2018, at 3:45 PM, raul <raulvior.bcn at gmail.com> wrote: > > The UPS is connected to the following environment: > OS: Debian GNU/Linux 9.6 (stretch) > NUT version: 2.7.4-5 > Device output from lsusb: 0463:ffff MGE UPS Systems UPS > Model name: MGE EllipseMAX 1500 > URLs: >

I have restored original configuration and enabled the ignorelb flag. I didn't point out in the original e-mail that after every poweroff the battery percentage is reported at 40% instead of 100% and charges slowly again to 100%. Maybe the UPS sends a LB event and shuts down immediatly as suggested in the manual. But the UPS powered off again. The variables reported by upsc can be found

I have trouble in getting communication work with MGE Ellipse 500. I bought it second hand and I don't have the cable for it. How do I know if it's the Serial or USB model? The serial number of the unit is: 769B16015. I suspect it is the serial version as the label next to the RJ11 stands "com port", but I can't be 100% sure. MGE Ellipse serial cable pinout can be found

The UPS is connected to the following environment: OS: Debian GNU/Linux 9.6 (stretch) NUT version: 2.7.4-5 Device output from lsusb: 0463:ffff MGE UPS Systems UPS Model name: MGE EllipseMAX 1500 URLs: http://powerquality.eaton.com/Products-services/Backup-Power-UPS/Ellipse-MAX-eol.aspx?cx=97&GUID=7BB6CD53-9F6D-4D62-B326-1099F137BF8D http://powerquality.eaton.com/68558.aspx?cx=97 The problem

On Dec 2, 2018, at 7:55 PM, raul <raulvior.bcn at gmail.com> wrote: > > I have taken out the batteries and measured them with a multimeter. They put out 13V (they are rated 12V 9Ah). What sort of load did you have in parallel with the multimeter? (This is why Wolfy mentioned the light bulb: if the battery has developed excessive internal resistance, it will show proper voltages when

I'm now doubting if I've made this statement or not, so here it is: newmge-shut is *not* ready for production usage! I've lately found some bugs during the MGE PSP 3.0.4/3.0.5/3.0.6 updates. So for the moment, prefer to keep using mge-shut. 2007/10/25, R?zsa G?bor <mailer.tovis at freemail.hu>: > newmge-shut ??? > Shutdown, switch of ups does not work. Using command >

On Dec 1, 2018, at 10:08 PM, raul <raulvior.bcn at gmail.com> wrote: > >> Also, given that the load is only 12%, double-check that the UPS is not configured for any power saving features that might cause the shutdown ("ECO mode" or similar). NUT does not get a notification for that event the way that it gets a normal LB shutdown notification. > > Are you referring