similar to: Bug#603713: xen-hypervisor-4.0-amd64: amd64 Dom0-Kernel crashes in early boot-stage

Package: xen-hypervisor-4.0-amd64 Version: 4.0.1-1 Severity: normal My 32Bit Dom0-crashes with error "Out of SW-IOMMU space for 65536 bytes" after doing moderate I/O on the local storage, which is a software-raid1 over 3 harddrives, connected to the builtin Perc H200 controller with ext3-fs. The error is reproduceable with "dd if=/dev/zero of=bigfile bs=1024 count=1000000"

Hello, I''m attempting to boot Xen 4.0.1 on a SuperMicro H8DGi-F motherboard and having not much luck. I can boot the 2.6.32.26 (or .27) kernels alone, but when I add Xen into the mix, I get consistent boot failure. I''ve tried Xen 4.0.1-release, 4.0.2-rc1-pre and 4.0.2-rc2-pre, all get the same failure. xen/next-2.6.37 works and boots great, but since netback isn''t

Hi Folks: I run into a problem when enabling Xen in next generation server platforms with Xen c/s is 21380. Xen reported "CPU Not responding" when booting up 32 CPUs( 2 sockets with 8 cores/16threads total). The log files belonging showed something wrong with APCI. So I added x2apic=0 in the xen grub line, but the symptom remained. However, Native RHEL5.5 can

while doing "while xm migrate --live domU localhost;do sleep 1;done" I just got the crash shown below. And it can be reproduced. The guest has 2 vcpus and 512mb, it runs pvops 3.7.9 (XEN) ----[ Xen-4.3.26579-20130219.172714 x86_64 debug=n Not tainted ]---- (XEN) CPU: 14 (XEN) RIP: e008:[<ffff82c4c01dd197>] nvmx_vcpu_destroy+0xb7/0x150 (XEN) RFLAGS: 0000000000010282

This issue I am encountering seems to only happen on multi-socket machines. It also does not help that the only multi-socket box I have is an Romley-EP (so two socket SandyBridge CPUs). The other SandyBridge boxes I''ve (one socket) are not showing this. Granted they are also a different model (42). The problem is that when I run ''perf top'' within an SMP PVHVM guest,

Hi, I''ve not tried pv_ops for a long time but just got a new system (Supermicro X9DRL-iF) so decided to try 3.5.0 with the latest Xen 4.2-unstable, unfortunately the system crashes immediately after loading dom0: traps.c:486:d0 Unhandled invalid opcode fault/trap [#6] on VCPU 0 [ec=0000] I''ve tried loading both bzImage and vmlinuz (gzip compressed vmlinuz) with the same

Installing xen on a fairly clean c7.2 system. I get a xen kernel panic. (XEN) Bad console= option 'tty' Xen 4.6.0-9.el7 (XEN) Xen version 4.6.0-9.el7 (mockbuild at centos.org) (gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-4)) debug=n Wed Jan 20 12:25:53 UTC 2016 (XEN) Latest ChangeSet: Thu Jan 14 15:35:35 2016 +0000 git:6e8597a-dirty (XEN) Bootloader: GRUB 2.02~beta2 (XEN) Command line:

?I wrote about this a couple months back.? George asked me to submit to the Xen developers list, but I never had the time due to work demands on getting the new server set up.? In my case, I had to use a different server.? The new motherboard/CPU had no issues with the second CPU.? If you turn off and unplug the second CPU, it will work. Check the archives for my e-mail address and see

OK, here's the info Bastian asked for. Transcript: rob at thismachine:~$ dmesg Bootdata ok (command line is root=/dev/sda1 ro ) Linux version 2.6.18-5-amd64 (Debian 2.6.18.dfsg.1-13) (dannf at debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Thu May 31 23:51:05 UTC 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009c800 (usable)

Package: xen-hypervisor-4.0-i386 Version: 4.0.1-5.8 Severity: normal Tags: upstream *** Please type your report below this line *** -- System Information: Debian Release: 6.0.7 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-xen-686 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8,

Package: xen-hypervisor-3.4-amd64 Version: 3.4.2-2 Severity: critical Justification: breaks the whole system -- Dump: (XEN) Xen version 3.4 (Debian 3.4.2-29 (XEN) Command line: com1=115200,8n1 console=com1,vga loglvl=all guest_loglvl=all noreboot (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: none; EDID transfer time: 1 seconds (XEN) EDID info not

Package: xen-hypervisor-3.4-amd64 Version: 3.4.2-2 Severity: critical Justification: breaks the whole system -- Dump: (XEN) Xen version 3.4 (Debian 3.4.2-29 (XEN) Command line: com1=115200,8n1 console=com1,vga loglvl=all guest_loglvl=all noreboot (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16

On Sun, Oct 29, 2017 at 11:51:55PM +0100, Fengguang Wu wrote: >Hi Linus, > >Up to now we see the below boot error/warnings when testing v4.14-rc6. > >They hit the RC release mainly due to various imperfections in 0day's >auto bisection. So I manually list them here and CC the likely easy to >debug ones to the corresponding maintainers in the followup emails. >

On Sun, Oct 29, 2017 at 11:51:55PM +0100, Fengguang Wu wrote: >Hi Linus, > >Up to now we see the below boot error/warnings when testing v4.14-rc6. > >They hit the RC release mainly due to various imperfections in 0day's >auto bisection. So I manually list them here and CC the likely easy to >debug ones to the corresponding maintainers in the followup emails. >

?Not sure if this actually made it to the list the first time.? Here is the SERIAL output (bottom of message after your questions).? Googling the error indicates it's something people ran into a few years back but was supposedly fixed.? Any ideas? I can verify that if I REMOVE the second CPU, it boots into Xen kernel no problem.? The CPU itself doesn't matter, as I can swap either

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I followed the instructions here: http://nixcraft.com/file-servers/14803-how-centos-5-pxe-linux-installation-server.html, along with a few other sources that were less successful, and I finally got a pxe boot going. I'm using CentOS 5.3 x86_64 media as the source. The server boots, but keeps hanging. Here is my boot line:

Hi, I did a git pull on pv_ops tree this morning and now get a crash when eth0 is started, here is the full boot log: Booting ''Xen 3.4 / Linux 2.6.29-rc6-tip'' root (hd0,0) Filesystem type is ext2fs, partition type 0x83 kernel /xen.gz com1=115200,8n1 console=com1,vga iommu=1 [Multiboot-elf, <0x100000:0x131748:0x8e8b8>, shtab=0x2c0078, entry=0x100000] module

I''ve installed Xen kernel for dom0 on a CentOS 4.4 but when i reboot the kernel says: _/\_\___|_| |_| |____(_)___(_)____(_)___/ http://www.cl.cam.ac.uk/netos/xenmdev = 59.12 University of Cambridge Computer Laboratory6 Sep 26 01:52 qemu-dm.6463.log Xen version 3.0.3.0 (root@uk.xensource.com) (gcc version 3.4.6 20060404 (Red Hastart qemu- -rw-r--r-- 1 root root t 3.4.6-3)) Mon Oct

Not sure if this is a Fedora Core 6 issue. I already post a message on their list but didn''t get an answer. So I am going to try here.. Does anyone has Windows Guest OS running successfully with the Dom0 has all the physical memory allocated? If I don''t lower the memory assign to Dom0 through grub, I will not be able to run a Windows Guest OS. This what I got Using

Hi, I have a system based on a Supermicro X8DTH-i motherboard and a Xeon E5506 CPU. It was previously running Debian lenny with xen-hypervisor-3.2-1-amd64 (3.2.1-2) / linux-image-2.6.26-2-xen-amd64 (2.6.26-29) without incident. I upgraded it to Debian squeeze, with xen-hypervisor-4.0-amd64 (4.0.1-4) / linux-image-2.6.32-5-xen-amd64 (2.6.32-45) and now it does not complete a boot of the dom0