similar to: Xen + Debian Squeeze + Recent ATI Graphics Card

>.. And KMS modesetting works properly now in Xen dom0! My onboard ATI Radeon is the following: > # lspci -v | grep VGA  11:04.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) (prog-if 00   [VGA controller]) Environment :  Xen 4.0.1-rc6 & 2.6.32.19 on top of F13 ( .config attached) [root@fedora13 ~]# lspci -v | grep VGA 01:00.0 VGA compatible controller: ATI

Hello list, I have performed a fresh install (fully updated) of squeeze amd64 and installed the xen-linux-system-2.6.32-5-xen-amd64 package with all its dependencies. When I restart and tried to boot the linux-image-2.6.32-5-xen-amd64 (pvops style) kernel on bare-metal my laptop boots fine. When I use the hyper-visor on the system with the same linux-image-2.6.32-5-xen-amd64 kernel, it hangs

Hello list, I have performed a fresh install (fully updated) of squeeze amd64 and installed the xen-linux-system-2.6.32-5-xen-amd64 package with all its dependencies. When I restart and tried to boot the linux-image-2.6.32-5-xen-amd64 (pvops style) kernel on bare-metal my laptop boots fine. When I use the hyper-visor on the system with the same linux-image-2.6.32-5-xen-amd64 kernel, it hangs

On 09/05/2013 01:55 AM, Gene Cumm wrote: > On Wed, Sep 4, 2013 at 2:34 PM, Piotr Karbowski > <piotr.karbowski at gmail.com> wrote: > >> With syslinux (extlinux) it will jump to last INCLUDE'ed menu always, with >> 5.01 it will display list of elements, then allow me to choose which one I >> want to enter. >> >> Even if the include part contain a

Hey Jeremy, Please pull from devel/pat (based off your xen/dom0/core tree) which has one patch: Konrad Rzeszutek Wilk (1): xen/pat: make pte_flags(x) a pvops function. which is neccessary for the drivers/gpu/drm/radeon driver to work properly with AGP based cards (which look to be the only ones that try to set WC on pages). Also please pull from devel/kms.fixes-05 (based off your

> * Gene Cumm, 2014-06-10 : > > > If 4.05 or 3.86 acted nicely, this would mean a bug. > > OK, so, with unpatched official binaries: > > 3.86 > ---- > > pxelinux.0 > Loads fine, assumes terminal width 15, displays menu, but then freezes > (I suspect it does not process any input from the serial port) > > gpxelinux.0 > Displays: >

Hey Guys ! I am trying to install Xen 4.0.1 on Ubuntu 10.04 LTS on a 64-bit machine. Basically the issue that I am facing is that when I try to boot up my Domain0, my video display driver crashes and the system simply hangs. I am using an Intel graphics card: $ lspci -v | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) I

I am currently using a Dell PowerEdge server R610 with Xen 4.0 installed and the 2.6.31.13 pvops kernel. I am accessing the server console using the iDRAC KVM feature of the dell management console. Does anyone know how to configure the console option in the grub menu so that all the boot messages can be seen on the mgmt console? Currently I can view only the Xen bootup messages if I dont specify

https://bugs.freedesktop.org/show_bug.cgi?id=28891 Summary: [GeForce FX 5200] Broken KMS support (corrupted cursor) Product: xorg Version: unspecified Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: minor Priority: medium Component: Driver/nouveau

On Wed, May 25, 2011 at 12:41 AM, JAMES BOND 123 007 <james123007@gmail.com> wrote: > Hi , > I saw your thread post at > http://web.archiveorange.com/archive/v/ZvO4jnaavtTfcyqnHoRX > , about problems with XEN 4.0 installation. > I have the same problem and my machine is similar to yours( HP Proliant > DL380G6, 4GB-RAM) This question is better asked on the xen-users list.

* Gene Cumm, 2014-06-10 : > If 4.05 or 3.86 acted nicely, this would mean a bug. OK, so, with unpatched official binaries: 3.86 ---- pxelinux.0 Loads fine, assumes terminal width 15, displays menu, but then freezes (I suspect it does not process any input from the serial port) gpxelinux.0 Displays: PXE->EB: !PXE at 9E64:0060, entry point at 9E64:00F6 UNDI code segment

Dear All, I am currently trying out Xen 4.0.0 with Ubuntu Lucid as Dom 0 with a pv ps kernel, and I can get it to boot and run lucid as dom0 perfectly well in console mode, however, I am unable to start X11. Looking here I can see there are problems with pvops kernels and X11. http://wiki.xensource.com/xenwiki/XenPVOPSDRM . Would a summary of the page http://wiki.xensource.com/xenwiki/XenPVOPSDRM

On Thu, Apr 10, 2014 at 9:50 AM, Thomas Schneider <c.monty at web.de> wrote: > Well, with the setting/option "nomodeset" I don't use any xorg.conf at all. > > I'm just not sure if the system would boot w/o xorg.conf and w/o > "nomodeset". > > Anyway, I will give it a try and use the recommended options > "nouveau.noaccel=1" and

Using nomodeset worked. Diagnostic kernel did not work. Any idea what i have to do to boot without using nomodeset? Am 16.05.2016 um 15:36 schrieb Earl A Ramirez: > On 16 May 2016 12:13, "Oliver Zemann" <oliver.zemann at gmail.com> wrote: >> Hi, i just installed CentOS 7.2 on my little "server" but i get a black > screen during boot. It is a Asrock Am1h-itx

Hello, not sure what you mean by "There is an option to use TAB to complete option choices but nomodeset does not seem to be one of the available options" but in my experience nomodeset option works pretty well when put to grub boot parameters. On Thu, Sep 27, 2018 at 9:27 PM H <agents at meddatainc.com> wrote: > I have recently bought a Dell Inspiron 15 7570 laptop with a 4K

Hello, I''m trying to do a pci passthrough for a perc 5/i raid controller and i have 2 problems (i haven''t used linux systems recently so i may be a bit rusty) : On the hardware part i''m using an ASUS M4A89TD PRO motherboard with iommu enabled in bios (and i can see with "xm dmesg" that I/O Virtualization seems enabled by xen). On the software part i

After update the system now I use: Kernel 3.9.2 x server 1.12.4 nouveau 1.0.7 the xorg config are at: http://pastebin.com/2LUxLiVs It's the one installed by my distro, without any modification I have made 2 test. Normal boot Xorg at http://pastebin.com/reZdAXEF GLX Renderer is detected as GLX "Mesa DRI nv18 x86/MMX+/3DNow!+/SSE GLX" Same configuration with nomodeset Xorg log

I have recently bought a Dell Inspiron 15 7570 laptop with a 4K display on which I want to install Centos 7. I had some problems with the first install and am therefore redoing the install. One problem is the minuscule font, both in the text window and in the graphic installer. It has been suggested that I should add nomodeset to the grub installer. There is an option to use TAB to complete

https://bugs.freedesktop.org/show_bug.cgi?id=35514 Summary: Black screen with nouveau on a GeForce 8600M GT, either LiveCD or fresh install Product: xorg Version: 7.6 Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: major Priority: high Component: Driver/nouveau

Hello, I recently installed Ubuntu 24.04 on a MacBook Pro (Mid-2010) running a NVIDIA GeForce GT 330M adapter. Unfortunately the computer is constantly freezing. If I pass "nomodeset" to grub, the nouveau driver is not used and the computer does not freeze so it seems to be related to the nouveau driver. I am wanting to know if there are any parameters I can pass to nouveau to