similar to: Debug level in "request help" section of website

Hello, I have a Yunto e a Zanto ups connected with usb with id 06da:0002 and 06da:0601. I have seen that people had some success using megatec driver. But now megatec is replaced by blazer-usb and I am not able to use my upses under nut. Can you help me? Thanks! Mario

In /var/log/syslog Dec 23 13:04:50 ************** upsmon[2010]: Poll UPS [rack1ups at localhost] failed - Write error: Broken pipe After this, there is no longer a upsd daemon running. Error messages follow: Dec 23 13:04:50 ************** upsmon[2010]: Communications with UPS rack1ups at localhost lost ... Dec 23 13:04:55 ************** upsmon[2010]: UPS [rack1ups at localhost]: connect

Hello. I've been trying to got it work but haven't luck. I'm using NUT 2.6.0-1 under Windows XP with libusb driver installed (USB\VID_0D9F&PID_0004&REV_0001). I had tryed all options with such config: *PWCOM] driver = usbhid-ups port = auto vendorid = 0d9f desc = "Powercom BNT-800AP" type=BNT* * *Here is output from CMD:*

On 14/01/2011 20:40, Arnaud Quette wrote: > Author: aquette > Date: Fri Jan 14 20:40:06 2011 > New Revision: 2832 > URL: http://trac.networkupstools.org/projects/nut/changeset/2832 > > +link:http://www.networkupstools.org/source/2.6/nut-2.6.0.tar.gz.sig[signature] May I suggest that you also provide checksums for the tarball? I'm updating the FreeBSD port, and wanted to

Hi Sabine and Christoph, I've just committed a few changes to mge-utalk (r2749). can you please try a snapshot and report back the results: http://new.networkupstools.org/download.html#Snapshots cheers, Arnaud -- Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer -

Hi, my name is Sebasti?n from Spain I need help for that. I have 2 salicru ups I need monitor with a fedora 14 pc. Someone knows if i can configure ups.conf to monitor one or another ups? only make a upsc "ups" for take data. The upses are connected via usb and nut always read the first one connected. The upses are the same model. Thanks for all! Sebasti?n Le?n del Moral urticaries at

Hi Sergey, 2011/7/15 Sergey Talchuk <tals1975 at gmail.com> > Hi Arnaud, > > both configurations are ok :). Please find the file attached. > logic since the 2nd is automatically guessed from the first using USB Vendor and Product ID ;-) can you please send in upsc, upscmd and upsrw output. and also report the shutdown testing as described here:

Hi James, 2011/1/1 Among The Living <stinkysmellykid at gmail.com> > Hey there, > > After a few hours with tampering I got my UPS up and running. > > It's a "RocketFish 1025/1000va" (The model varies and is listed as > 1000va as well as 1025va). > > I got it working with the usbhid-ups driver, which I guess is a no > brainer :P. Just figured I'd

I and several other users have encountered problems using PowerCOM UPS of the BNT 1500A model. Looking over other responses and dealing with my own issues, I submit the following attached patch. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20110428/00d7d2f9/attachment.htm> -------------- next

Hi, I'm forwarding your mail to the NUT list, because of a lack of time, and also since some others (Charles) already looked at this issue IIRC (related to the development branch 'netport'). cheers, Arnaud -- Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer -

hello, I installed with NUT UPS MGE Pulsar Evolution 2200 all orders of arrest, interrogation etc etc ... UPS work well However, I have a problem with the order in NOTIFYCMD upsmon.conf that not run ... I created a script that generates a simply log I indicated in upsmon.conf NOTIFYCMD / home / nut / alert_ups.sh below my upsmon.conf RUN_AS_USER nut MONITOR pulsar at localhost 1 admin1

2011/6/27 Frederic BOHE <fbohe-guest at alioth.debian.org> > Author: fbohe-guest > Date: Mon Jun 27 13:56:51 2011 > New Revision: 3060 > URL: http://trac.networkupstools.org/projects/nut/changeset/3060 > > Log: > Add NUT server scan. > > (...) > device_t * scan_snmp(char * start_ip, char * stop_ip,long usec_timeout, > snmp_security_t * sec); > >

Hi, Does anyone have a similar configuration or have used the same model with Ubuntu before with success? Strange my system can't seem to detect the UPS and I can see usbhid 2-1.1:1.0: couldn't find an input interrupt endpoint in dmesg when I plug in the UPS. Hope can share your experience on this.

Hello! I try use NUT on some servers. When i use this package on x64 Windows 2003 servers, upsmon hangs on with error: Faulting application upsmon.exe, version 0.0.0.0, faulting module upsmon.exe, version 0.0.0.0, fault address 0x0000458f. I try use another server, on 32-bit all is ok. Problem only on x64 platform (maybe in libusb)? And no different - upsmon master or slave. C:\Program Files

I did a bunch of work on this today. It should be all set to go. This patch is to add support for the Cyberpower RMCARD snmp cards. I basically copied the driver for bestpower, changed the name and updated the mib map. I have this running on two separate systems (two separate ups's) and it looks good. The only thing I could not figure out was updating the Makefile.am (my aclocal/libtools

Here are a series of my recent changes to NUT. The first few in the set are primarily little fixes and improvements. In among those are a few for .gitignore files which of course you can ignore for SVN, and there's one for a commit to a generated file which of course should not be tracked in any VCS. Then there are a couple or three to do with generating the header files used by

Dear NUT users, Thanks to Fred Boh? work, we now have a complete NUT port on Windows, sponsored by Eaton. We hereby release a first Beta package (2.6.0-1), following a light tests plan on our side, and would welcome as much feedback as possible. So, if you can take 5-10 mn to install and test this MSI package on your Windows system(s), the link is there:

Hi all, on proposal by Arnaud Quette and sponsored by Eaton, I will work on a port on Java of client, discovery and config API. As I have already suggested (mail of 2011-06-14 of this ml), instead of developping another port of nut protocol, I suggest to develop a higher level API in C/C++ uppon existing upsclient, inspirated by existing C-based tools and python and perl rewrites. The second

Greetings, The way that bcmxcp_usb reacts to and recovers from a USB cable unplug-plug appears to have changed significantly between 2.4.1 and 2.6.0. While I can see some improvements, bcmxcp_usb 2.6.0 does not appear to handle a USB cable unplug-plug correctly. Does anyone know if this has been fixed in subsequent releases? Here are the details. When the USB cable between my server and my

While reviewing Greg Woods' PATCH 28/36, I realized that our namespace use "peakcurrent". A more coherent name would be "current.peak", as used in Greg's patch (well, in the metasys driver to be precise). For the time being, only the upscode2 driver is using "peakcurrent". But as told, metasys is already using "current.peak". So I'm going to